StoreYourBoard Bike Wall Mount | Garage Bike Rack Wall Mount | Bike Wall Hanger, Vertical Bike Rack Bicycle Wall Mount Hook with 124° Swivel Stopper | Pack of 4, Max 2.6” Tyres, 23kg Capacity, Black

mounting brackets are superb and they work really well and save space as you can fold them against each other and lock them My only issue was that the screws were not strong enough when mounting onto breeze block walls ..so I used concrete hex headed screws in place of those supplied..much more solid

Good solid build. Screwed into marine ply walls so supplied fixings worked well. Neatly hangs 3 bikes at one side of shed leaving room to pass on other. Excellent product exactly as advertised.

Good packaging, heavy duty item, straight forward assembly, and it works. However, there is one thing I'd really like to modify, and that's the latch the top which hooks in between the spokes and holds the wheel in place. There isn't enough surface area on this latch for the wheel to sit comfortably on. The wheel itself needs a concave area to sit into, and this latch is too square, causing the wheel to sit in a dead zone. Don't get me wrong, it works, and it's secure, but I genuinely think the wheel needs more support when sitting in its desired position. I'll add a few pics once I get the installation fully fitted. This

Brilliant brackets. Really well made and love the fact they swivel so the bikes dont stick out too much of the wall saving space.

Added 4 bikes (for varying ages) to the wall of an internal store room, with studded and plasterboard walls. The product itself is very strong - coping with all the family’s bikes, no problem. The swivel mechanism is also very smooth and, with the added bracket for the bottom wheel, the bikes feel solid and protected when swivelling. The packaging was efficient - small but quite heavy, reflecting the tough construction materials - and arrived on time. Personally, I had a bit of a problem ensuring I found studs and ended up putting a long piece of timber up, to assist with the load carrying. However, apart from my inadequacies as a workman, I’d absolutely recommend.

I have four bikes I needed to hang on the wall to give me more space in my garage, I was looking at Steady racks but they were quite expensive, then I found these, for a similar price of one Steady rack you can get four mount your board racks. I mounted mine on a block wall so I was able to put them where I needed them, after I set the height of the first one I went 100mm up with each bracket to allow the handle bar of the previous bike to go into the void between front wheel and frame so the bikes would fold as close to the wall as possible, I then spaced them apart from each bracket the width of each handlebar which was all roughly 800mm, all my mountain bikes are 27.5” wheel and the same sizes so I knew it would work, if you have a mix of different size bikes and wheel sizes it may take a bit more planning. My MTBS all have 2.6” tyres and they fit into the racks no problem, the bottom wheel stopper is a bit rudimentary but it works. It’s important to make sure the pin is located when trying to put the bikes on or take them off the rack otherwise it can move around and make it more difficult, once the bikes are on you can take the pin out and fold the bikes away, I always make sure the hook isn’t resting on a spoke and the wheel is centred before folding away. Very pleased with these brackets and would definitely recommend.

Worked perfectly for what we needed to get all the bikes off the floor. We have 6 in a row, so it can be annoying when they are folded against each other and you need the one at the end. But that is just because of the space we have and number we required. They are currently holding adult and children bikes and I put it into a masonry wall with my own screws.

It was easy to install on the garage brick wall; plugs are not supplied; use 10mm plugs! And a 10mm drill bit !! You need to lock it before hanging the bicycle; when the e-Moutain bike is involved, it can be pretty heavy!! So make sure you do not install the hook too high !! But it is pretty solid. I need to get used to hanging the emtb , as my garage is pretty packed

El producto cumple con la función para aprovechar espacios, buena calidad de ensamble

This is a great system. ( period) Works great and is easy to install. Just make sure, when you the distance between bike, how you will hang them. I hung the front wheel up, rear wheel up, front wheel up….to save space. I also installed a header board to which I screwed the holders and the header board is attached to the studs in the wall - baddabing, baddabum.

Looks like great quality. Still need to fit

Works well. Allowed me to store my bike in a small den while also using it as an office. Heavy duty.

me ayudo a ordenar mis bicicletas, buen producto