Pool Pump O-Ring Seal Repair Kit for Hayward Super Pumps SPX1600TRA SP1600Z2 SPX1600R SPX1600S SPX1600T (Regular, X, VSP Models)

This is the second gasket kit I have purchased. I leave my pump on year-round, so I get around 2-3 years on the motor. I've bought my first kit at my pool store and paid triple. This kit comes with all gaskets for the motor and pump reservoir. Works great and never had a leak. If you are a do it yourselfer like me make sure you watch YouTube for installation. It will show you how to install gaskets without contamination. I also buy my motor from Amazon which is much cheaper then others I've found on the internet.

Received this seal kit a day or two ahead of the motor (which arrived early). Because I had the seals I was able to install the motor right away when it arrived. A couple of tips for those installing these seals. It is recommended that you use pool lube (example, magic lube, I used Hayward's version) so you may want to order some when you order the seal kit if you do not have any on hand. These seals fit perfectly and the motor install went well because I had every seal I needed with this kit. The price also seems good. Amazon recommends an additional seal with the install (Swimming Pool Pump Shaft Seal (SP-1600-Z2) for Hayward inground swimming pool pump # PS201). I am pretty sure i don't need that one and will try to return it when it arrives.

It took 15+ years but the shaft seals on my SP2610X15 started leaking pretty bad. Once I got it apart, I realized the shaft seals were worn and had ground into the seal plate behind the impeller. This gasket set was just what I needed minus having to get a new seal plate. Once I got the new seal plate, I just looked on YouTube and found numerous videos on replacing the seals plus I was able to get the Hayward SuperPump manuals, too. Taking it all apart and putting it back together took about 30 minutes....tops. I had a few drops of water leak out once I turned it back on, but no doubt that was just from the ceramic disks in the seals seating for the first time. Now she runs bone dry and its been about a week. This kit comes with the housing gasket, diffuser gasket, and strainer cover gasket and then the 2 shaft seals that butt up against each other behind the impeller. For $14 and Prime delivery, it is well worth the money, time, and effort replacing all of these at once. That's assuming I get another 10-15 years out of them. I highly recommend doing it all at once.

I have the 1hp superpump sp1607z1m and these items fit perfectly fine. I wasn't sure which exact part needed replacement to fix my pump leak but I only wanted to take open up the pump once and replace all or most gaskets so I waited for this item to arrive prior to starting my fix. I found helpful that the pump seal(with white ceramic material) was individually wrapped in plastic to avoid from being touched accidentally and degrade its lifespan. I ended up replacing Diffuser Gasket and Shaft Seal and all fit fine and easy swap. Material and build seems to be pretty good and it fixed my pump leak. I can't speak for the other gaskets since I did not use them. Good less expensive option if you can wait and avoid going to local pool store.

Worked and lasting for years

This kit contained everything including the silicone to lubricate the parts. Everything fit perfectly and looks / feels as if OEM quality or better. Plus, they provided an gasket for my filter basket component. My pool guy charged me almost as much for that gasket alone as I paid for this entire kit. If you are a DIY person - you just have to love this deal. I hope I don't need to change out my motor again in the near future, but this kit was perfect. Very satisfied and highly recommend this over the manufacturer. Marc - SC

Bought both this kit and a B228SE motor from Amazon to replace my Hayward super pump. Don’t waste your money on this kit as two different seals in this kit leaked water. First the impeller seal. It’s the one in the picture. Seal leaked badly after installing. As you can see from the picture the seal came apart when I replaced it with one from a pool store. Also the spring on this seal was difficult to compress and got stuck when it was compressed, which is why I believe it leaked. The seal I got from the pool store worked fine and did not leak at all. The other seal that was bad was the seal that mounts on the back of the pump filter basket on the flange were the pump meets the filter basket. It was noticeably wider than the one installed and it leaked also because if that. I had my pump on and off several times trying to diagnose the two leaks. Replacing the pump and seals should have only taken a hour or so but it took me 3-4 because of the seal leaks. Some of you may possibly be thinking that I screwed up and therefore got leaks. I can assure you that this is not the case. I am an aircraft mechanic and changing a pool pump and seals is well within my skill level. Take my advise. Save your money and your time and don’t buy this kit. Go to your local pool store instead.

Here is the deal, as long as you know what you are ordering you will have no issues with this product. I have completely rebuilt my pool pump using these o rings/ gaskets. I do not know what actual brand they are, but apear to be as good of quality as Leslie's. I replaced all my pump seals 3 years ago. This year I had to replace my pump motor, since I would have the whole pump apart I decided to replace everything. So I actually have ordered this same set twice. The 1st set was functioning great, I probably could have just put it back together with the old rings/gaskets but chose not to. I recommend for the 1st timers to look up a few YouTube videos, there are several good ones to view.

Fitted eell on my Hayward pump

Très bonne qualité

Doesn’t work with my pump

Fit my SP2605X7A perfectly. I was able to replace all seals in about an hour.

Réparer moteur de piscine pour fraction du prix