3D Printer Filament Dryer, Sovol SH01 Filament Dehydrator Spool Holder, Dry Box for Keeping Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS Material, White

I recently purchased the Sovol SH01 Filament Dryer to address moisture issues affecting my 3D printing projects. This device has proven to be indispensable in maintaining filament quality and ensuring consistent print results. ✔️ Key Benefits: Effective Moisture Removal: The Sovol SH01 excels at eliminating moisture from filament spools, preventing common issues like stringing, bubbling, and poor layer adhesion caused by damp filament. User-Friendly Interface: The dryer features an intuitive control panel, allowing me to easily set the desired temperature and drying time based on the filament type. Versatile Compatibility: With adjustable temperature settings, it accommodates various filament materials, including PLA, ABS, PETG, and more, ensuring optimal drying conditions for each type. Continuous Drying Function: The option for continuous drying is particularly useful for extended printing sessions, keeping the filament in optimal condition throughout the process. ❌ Areas for Improvement: Size Considerations: While the dryer accommodates standard filament spools comfortably, larger or wider spools may not fit as easily. It's advisable to check the dimensions before purchasing. 💡 Final Thoughts: The Sovol SH01 Filament Dryer has become an essential part of my 3D printing setup. By effectively removing moisture from filaments, it ensures smoother printing experiences and higher-quality results. Despite minor size limitations, its performance and ease of use make it a worthwhile investment for any serious 3D printing enthusiast. ✔ Best For: 3D printing users seeking to improve print quality by maintaining dry filament. ❌ Not Ideal For: Those using non-standard or oversized filament spools without verifying compatibility. 👉 Overall: 5/5 – A must-have tool for achieving consistent and high-quality 3D prints.

This is a neat little unit that does exactly what it promises. I had no trouble fitting two standard 1kg spools inside, and it runs quietly in the background without any annoying fan noise or hums. The build quality feels solid, especially for the price & nothing feels flimsy or cheap. The digital display is pretty basic, it shows humidity and the remaining drying time, but not much else. That said, it does the job, and at this price point, I wasn’t expecting anything too advanced. One small gripe: the instructions recommend propping the lid slightly open during drying to let moisture escape, but there’s no built-in way to do this securely. You have to balance the lid on the edge of the clips, which feels like a bit of an afterthought. Not a dealbreaker, just something to be aware of. All in all, it does exactly what I need it to - dries filament well, feels sturdy, and doesn’t break the bank which have all helped with the stringing and adhesion problems I was having. I’ve already ordered another one.

First things first, the item arrived very well packaged with foam padding both inside and outside of the dryer for excellent protection. The setup was very easy to understand and use, basically just plug it in, pop in some filament and set the drying temperature and time on the front panel and let it do its thing. The nice touch is that you can see the moisture content within the drying chamber throughout the process and I can confirm that it does bring down the humidity levels quite a bit, however even though the chamber is fitted with a seal and locks the humidity does seem to rise again quickly once the drying process ends. There are rubber bungs to close any gaps from the filament feed holes and even to block the power socket, but somehow the humidity still rises fairly quickly. Does it do the job? Well yes it has helped with drying out some older filaments, but I find keeping the dryer running whilst printing provides the best results for me. I’ve given the 4 stars purely for the fairly rapid return of moisture in the dryer even though it’s sealed, but if you can live with that it does a good enough job.

The Sovol filament dryer never fails to please! The design is very stylish and does not look industrial! I was drawn to this brand after reading many positive reviews from other owners. I initially bought one earlier last in 2024 and after being impressed with how it performed I decide to buy my second dryer. The price has always been marketed right and I believe it is a value for money product. The temperature range allows for heating at 40c to 50c. You can load two spools of filament rolls if they have a diameter of 60mm, if the diameter is bigger the dryer will only accommodate one filament spool! To reduce stringing, moisture levels and bed adhesion problems. I use the digital program to set the drying time and I also maintain drying during the printing process for better print results. The simplistic functionality of the dryer makes it user friendly and the clear bright LCD helps maintain visual awareness of progress from a distance. The motor sound recorded at an average of 49db. When the printers are running the fan noise is not noticeable. I particularly like the 4 filament outlet positions, this one a key point in my consideration for purchase. Overall this has been a really functional and cost effective addition to my stock and I am a very happy owner!

My first dryer from Sovol needed a new fan, it was noisy. They replaced it without a quibble. That dryer last exactly two years. It did a fantastic job of drying filament so I bought another. I found out that the old dryer was fixable, it just needed a new heater element. Fully expecting to pay for a replacement Sovol sent out a replacement part free of charge, one year after the guarantee ran out. I will always buy from Sovol including its filament because when you find a good customer-oriented company you would be silly to stop. As for the running of the dryer. It has three set temperatures. 40c/45c/50c. When drying filament you don't want it to dry too fast as the outside of the reel will be dry but the inside might still be damp. So, I recommend the slow burn. It has a timer which runs incrementally from 6 hours to 12. After the timer stops the dryer switches off. However, yes there is a however. The aforementioned heater element will probably last longer if you keep the dryer's feet off the table. There is a stand that fits the sovol on Thingiverse that does the job of providing good underside ventilation. I highly recommend the Sovol SH01 Filament Dehydrator Spool Holder.

I needed a filament drier and saw this Sovol had been reduced and had some reasonable reviews - it did have some poor reviews but they were in the minority. I wasn't overly impressed by the build quality, it wasn't awful, just flimsy - I certainly wouldn't have been happy if I'd paid the alleged full price. However, it's just going to sit around keeping filament dry so it doesn't really need to be super robust, just be aware that the price does not equal quality. Ok, I gave it 1 star. Why is that. Well, to be quick, it didn't work. It wouldn't display the temp correctly and wouldn't allow me to set it. These things happen occasionally, so I just contacted Sovol support to see if it could be fixed. That was days ago and I'm still waiting for a response. In the meantime it's been sent back to Amazon and I got a full refund. As a rule, I try to reasonable - sometime there are issues, that's a given with mass produced, cheap items - I say cheap but even reduced to £45 I don't consider it cheap, but I digress. If support offer a fix and are quick to respond etc. then I'm happy. However, in this instance the device was non functional, and so were support. So, expensive cheap tat with support at a similar level to the build quality gets 1 star. Cannot recommend, no matter how many other reviewers rate it highly. Hopefully I'll have better luck with the Creality drier I ordered in its place.

The unit works very well, it has a timer from 1hr to 12hr, but can’t be set to be on longer than that, for longer time, you need to extend the countdown timer. It has a small fan at the bottom which helps to remove the excess moist from inside the box, thermostat can only be set to 4,45 and 50 degrees, it has a humidifier sensor that gives you real humidity inside the box. For rhe price, it has an excellent built and functions. I recommend.

" it is not airtight". For the sake of skimping on making the seal a bit thicker, the lid isn't a tight fit. Left overnight the humidity rose 30%. It's only use to me now is to reduce humidity when printing. I live by the sea, so you can imagine how high humidity is for me, average 50%. I have since purchased a better one for storage overnight. There is no release for venting while drying, the feed holes are only any use to use while printing. Whilst drying, I have to open the lid for a couple of minutes to release the hot air/humidity, then close it again and repeat until humidity gets to 15%, that's the lowest I can get it in this box. Then vacuum pack until needed.

Um produto de alta qualidade que cumpre bem a sua função de secar filamentos para impressão 3D. O design é moderno e compacto, a operação é simples e silenciosa, e o resultado final é excelente, melhorando significativamente a qualidade das impressões. Recomendo o produto.

Es una buena herramienta para mantener tus impresions con la mejor calidad possible. Por el mismo precio te puedes comprar un de una marca mas reconocida como SUNLU per a diferencia de esos es que este seca dos rollos al mismo tiempo y aparte tiene sello y ventilador para un secado uniforme. Altamente recomendable si impremes mucho con PETG o ABS, filamentos que aborben mucha humedad.

I've been looking at various filament dryers for quite a while (including on Aliexpress) and this seems to be the best thing going for what you get. There are several less expensive dryer boxes that will dry one roll at a time, but this is the only one that I've seen that will do two at a time (or one really large roll). Unlike most of the others, this unit also has a seal that the lid sits in, clasps to hold the lid closed, an internal fan, and shows the humidity (not just temperature). I have seen people modify other dryers to add some of these features, but after the trouble and cost of the modifications those boxes still only hold one roll at a time. This is still more economical than buying two un-modified single roll dryers. This dryer preforms quite well and has brought some life back into some of my older rolls of filament. Since this has a proper seal it will also keep a roll dry even when it's done. I now have a muti-filament (3) 3D printer and I have ordered a second dryer so I can keep three rolls plus a spare dry all the time while printing. You can set 3 different temperatures (40C, 45C, & 50C) and drying time from 6 to 12 hours. The box heats well and seems quite stable, and you can really only hear the fan when the lid is open (will update if it gets noisy). There are touch sensors for the three buttons on the front, and the backlit display is very legible. The external power supply gets warm but not hot and I've had it running for days without any issues so far. It has two filament holes on the top of the lid, with seals, and a seal for the power plug on the back. The only thing that would have been nice is extra filament holes on the back (or front) for alternative routing options. I'm quite happy so far and would recommend this over the single roll dryers (even if you only really need it for one roll at a time) 5 star product 🌟🌟🌟🌟🌟

A secadora em si é muito boa, bem construída e funciona perfeitamente. Porém, como ela só chega no máximo a 50°C, só é possível para usá-la para secar PLA, então tenha isso em mente quando antes de comprá-la.

Lo compre ya que tenia un monton de filamento que cada que imprimia parecia que estaba cocinando palomitas de maiz. Reparandolo completamente quitando la humedad, y dandome la posibilidad de imprimir Nylon y materiales compuestos con CF. Totalmente recomendado, es barato y aparte puedes usar el material directamente del secador. Lo unico que podria recomendar es adaptar un ventilador de escape para que la humedad salga, y sea mas facil o desatendido el proceso de quitar humedad ya que actualmente tienes que dejar la tapa un poco abierta para que no se acomule la humedad dentro, aun con gel silica veia que no bajaba de 30%, abriendo la tapa se baja a 19/21% de humedad.