5 Pcs Front LED Grill Lights Compatible with Ford Bronco Accessories 2021 2022 2023 2024 2/4 Door Badlands Wildtrak Everglades & First Edition with Fuse & Wiring Harness (Amber Light with Amber Shell)

I didn't want to jankily power these with a fuse pass through like they are supposed to be (I'll explain how!), so I wired them into Aux6 which is one of the lower Amp aux switches if you have the Aux Switches option. Video instructions were very cleat and step by step, install was very easy! Overall this was an awesome kit in design and implementation, highly recomend!To wire to Aux61)There is a purple wire [pic 2] up top by the grill in the middle on the headlight harness, you'll want to strip the fuse connector off of the end of the light kit and connect the lights to that purple wire once they are clipped in and all installed as per that video.2) There are 6 wires coming out close to the fuse box on the drivers side back corner of the engine bay. Those are wired to the Aux switches and hot (Aux6 is the Yellow/orange). There are 3 other wires in a separate loose bundle that come out close to that location (the purple one is the same wire that is in the front of the Bronco grill) they are separately run to the front of the grill, and then I think to the glove compartment. You will want to connect the purple wire that is down there from the small bundle of 3 and connect that to the yellow/orange from the bundle of 6 [Pic 3]3) Make sure you find a good ground for ground end on the lights. I had mine hooked onto an aluminum bolt which obviously wouldn't work and moved the ground to a bolt close to the battery terminal. I also included a screen shot [pic 4] of the Aux wiring diagrams and some info I got from a helpful chap on the forums as Ford didn't give any of us a hard copy of the owners manual.Now these lights are wired to Aux6! You can leave that Aux flipped on, it will not draw power when the vehicle is off and is powered when the ignition is on and/or the vehicle is started. Now you preserve the integrity of the fuse box water seal, can turn off the lights of you wish, and have a very satisfying switch to play with. Hope this is helpful!

These lights are great, installation instruction sheet could be a little more detailed but there is a video you can watch. All in all pretty straight forward. I would recommend.

First things first, the instructions are minimal and not great. They said 15 min. More like an hour. You have to remove your grill which, if you have a front camera and a washer for said camera you need to know that you must unhook them. Then there is a plastic shield that makes routing and plugging in the cables difficult if you have thick fingers. Then the hardest part was the fuse box. The indicated fuse didn’t work and my Bronco wouldn’t start. I plugged the fuse I removed into the supplied connector and everything worked but the lights stayed on even when the power was turned off. I then went to the original Amazon add and there is a video. I watched the video and the person mentioned 2 other wiring options. I tried one of those and so far everything is working. Now the good part, the kit is decent quality and looks like it will hold up. The lights look like they were always there from the factory. As long as they don’t burn out or quit working, I will be satisfied. They look great and if I bought another Bronco, I would install them again.

Looks good and easy to install. Not had them for long so can't speak to reliability. They could use better instructions. e.g when you replace the fuse with the provided cable, they don't tell you to plug the fuse into the empty fuse slot on the cable. Also, this took me about 2 hrs, if you've done this before it may take you 1 hour but no way this is a 15 min install as claimed.Note that if you connect them to the ignition fuse slot as the instructions indicate the lights may stay on a while longer after you turn off the vehicle - also after your headlights turn off - but they'll eventually turn off

Ordered these for my girlfriend's 2024 Bronco Wildtrak and unfortunately the fuse tap location noted in the instructions does not work with the Wildtrak models specifically. My assumption is that the fuse box schematics changes either from year to year or from model to model. When fuse tapping into the location specifically called out in the instructions, the car was left unable to start. Did not feel like spending time locating a better fuse tap location and ended up returning the product. Be careful when installing!

they look great! However, the video install by GarageBoys on YouTube makes the job easier. But DO NOT install in the fuse holder shown on the video. The video shows replacing the 20A fuse with the included fuse attachment (10A) from the lights wiring harness. If you do this - our Bronco will not start and the starter will just keep turning over. I figure it is because of the fuse size going from 20A to 10A. . Easy fix is to just attach the red wire from the wiring harness (you will have to cut and strip the wire - you won't need the fuse plug in attachment included with the wiring harness from the LED lights )and to the pre-wired Yellow/Orange wire that operates AUX 6 switch above the mirror in the cab of your Bronco. (all 6 AUX switches are pre-wired and are located between the fuse box and the cab) The Aux switches only work when the Bronco is running so you can just leave the switch in the on position and these lights will come on whenever the truck is running. Hope this helps

I watched several YouTube videos of different brands, and actually bought one from f150leds first. Was very disappointed in the fit and finish with their product. Came across these, and at a 1/3 the price, am very impressed with the quality. They clip into the grille nice and firm with a solid click. The wiring harness is put together perfectly. Someone definitely thought out the lengths of wire and gave the lights the perfect length of wire to do what you want while still being able to have some wire management. I decided to wire to one of my AUX switches, which was easy and I didn't use the fuse wire supplied. Very happy with my purchase.