La-Z-Boy Executive Ergonomic Office Chair with Lumar Support, Leather Chair

This is, without a doubt, the most comfortable office chair I have ever had! It is also good looking and stylish. This one is not huge, so it fits nicely behind my desk. If you are over 6' tall or weigh more than 250 lbs,, you may want to check out the version for "Big and Tall" as this chair is more suited for an average sized adult. I was worried about putting it together (I am NOT athletic or mechanically inclined!) but the instructions were quite clear and all necessary screws and tools were labeled and included. It took a little under one hour - which may have been longer than if I had had some help, but I was too impatient to start using it to wait on my husband to get home! HINT: using the upturned empty box it arrived in as a "work table" helped tremendously. Also, be sure to push hard on the casters to secure them in the base before going further. Be sure not to tighten the bolts (as stated in the directions) securing the back to the seat before attaching the arms! You need the wiggle room looser bolts will give you to line up the screws and holes on the arms. The chair was extremely well packaged and arrived safely - a day earlier than promised! This chair was also far less expensive (about 50% less) than other "Executive Office Chairs" we found in Office Depot, Haverty's or Staples, and the quality is quite a bit higher. All in all, I am quite happy with this purchase! I plan to use it for quite awhile - at least through retirement!

I purchased this chair about a month ago. It arrived on time in undamaged condition, and I found it easy to put together. After putting it together, my assessment was that the chair was attractive and well made. After using it for the last month my assessment of the chair has not changed, except that I can add that I use it often, and it is very comfortable. The chair is relatively heavy for its size, and the leather feels thick. The hardware works as it should. The description of the color is "coffee brown" and I would say that that is about right. It is a dark brown with an even color tone throughout. One other thing to note - and I knew it before I bought it - is that it is not a true highback chair. The back of the chair is 2-3 inches too short for that (and the advertised measurements were accurate and reflect that). If there were a size between mid-back and high back this would be it. That said, after using it for a month I rarely even notice that it is not a highback. I would definitely recommend this chair.

Hello All, I highly recommend this chair to everyone who is thinking about purchasing it. I just received it today (02/01/2017). I put it together, sat in it, and do not regret the purchase for one bit! it is so comfortable, well padded, the hight is just right for me (5'9" with a tall desk) and has a very sturdy construction (the casters are attached to a metal baser with an elegant wood overlay). However, what I do regret is not returning it when I saw the box (I think this chair was sold by Milwork Holdings Inc.). (1) the box arrived with one side opened, and retaped clumsily. (2) Although, all the pieces and the hardware were in the box and in the factory original packaging, the hardware was also clumsily taped to the box for the gas cylinder with packing tape. After seeing this, I just had the feeling like it was delivered then returned and then delivered to me. Generally, I don't have a problem with buying a returned item, as long as all the pieces are accounted for and present in the box, and there is no major damage to the product I am purchasing (meaning no more than minor blemishes). On this purchase, however, I just wish I received a big discount on this purchase. It took me nearly two hours to completely assemble the chair. Trust me, it is not because I am mechanically incompetent (I am an aircraft mechanic, and I work with very expensive commercial aircraft, flown by a prominent airline, probably one you have flown in), but it was because the back would not line up correctly with the bottom cushion. The bottom seat cushion and the back come as two separate pieces and need to be assembled to each other. The back has an L-shaped metal piece that attaches to the bottom cushion, on the bottom of the cushion. Where the seat cushion meets the back cushion at the base of the back, and at the rear of the bottom cushion, the back would not align with the bottom cushion and the back was twisted to the left. The holes that attach the back to the bottom cushion are both oval and elongated, which means that there is room to adjust the seat back to the seat cushion, in order to properly align the back to the bottom cushion. Unfortunately, on my chair, the metal piece that attaches the two cushions together (by way of L-shaped metal piece), was twisted severely enough that the holes on one side were at their maximum adjustment limit in one direction, all the while, the other set of holes had plenty of room for adjustment. However, the L-shaped metal piece was wedged against the base plate on the left side forward corner. The left side of the L-shaped piece is the area where the holes which had room to adjust were located. Thus, I was unable to attain the proper adjustment, since the L-shaped piece was stuck against the base plate. In order to get the alignment completely straight, I needed a crow bar and another person's help. In order to get the adjustment I needed from the left side holes, I wedged the tapered end of the crow bar in between the base plate and the L-shaped metal piece and pried on the L-shaped piece. Now granted, I may be a little O.C.D. over alignment, since it is part of my professional work. But this chair was expensive, therefore, it should be right. I guess I can't count on anything from China to be right. But in all fairness, it is more likely that the L-sahped piece was damaged to mishandling of the chair during transport. That being said, remember this is a piece of furniture, and it requires assembly, and the major components are made in China; therefore not everything will line up correctly at first blush. But, it should be close, not as far off as mine was (that is because of mishandling of a return). The instruction booklet is on the seat bottom, attached to the black side of the cushion. They are specific enough to make assembly intuitive; however, as a word of caution, go through it slowly, and make sure that all your fits and clearances are correct before you tighten everything down to full torque. In addition, make sure that you read the instructions step by step, there are multiple bolts that go into different holes on the same part. Namely, the seat plate. There are longer bolts in the front and shorter in the back. If you do not put the right bolt in the right hole you may experience creeping, and rocking, and a wiggly seat. Finally, if your box is all tattered and it looks like it was retaped after a return, SEND IT BACK! Otherwise, after I fixed the alignment, this is a great chair, and I know it will last for a long time. My other chair, that lasted 20 years, wasn't padded nearly as much as this chair is, when it was new. Good luck.

purchased as a Christmas gift for my husband. it has held up beautifully. He has spent hours and hours in it and has even been known to fall asleep in this chair. It is very comfortable, the padding has held up, the leather is durable, and is still the rich color it was when I bought it. The height of the chair works for him, at nearly 6 feet and it fits him like a glove. He says it is one of the nicest desk chairs he has ever had ( and we have gone through a few)

The chair is comfortable and adjusts well. Rolls around ok, but the something sounds like it's dragging on my chair mat when rolling. When assembling, one of the threaded tubes used to screw in the arm rests had a good 1/4 inch of the interior threads missing. I had to really force the bolt into the tube in order to get it to catch the threads. Not 100% sure it'll hold over time. Also, as shown in my picture, the material itself is pretty fragile. This scuff was from simply rubbing against my desk. The edge of the desk is even rounded and there aren't any burrs or anything on it. I suspect that over time, this material won't hold up to normal usage. Pretty disappointed in La-Z-Boy's quality on this product and the price they charge for it. For a company that supposedly prides themselves on quality, it seems they've sold their values down the river in exchange for some dollars. Sadly this seems to be on par with a lot of companies anymore. I might as well have bought a cheaper chair as the La-Z-Boy name seems to mean nothing anymore. Too much of a hassle to request a return and my company paid for it, so I'm not really out anything, just disappointed. I won't be buying another one of their products. I'd suggest you go to a store locally and check out the chairs they have so you can see the quality for yourself. If you would prefer to order from Amazon, I'd guess they'd have what you're looking for cheaper than a local brick-and-mortar, but at least you can actually check the quality before buying.

Any chair you buy you first should sit in it to see if if it meets your comfort standards. Obviously this is impossible, so you order the chair, assemble it and then sit in it... This chair was not cheap. I bought it because it is a Lazy Boy brand. Lazy Boy products have always been quality products that stand the test of time. So I ordered this chair assembled it and tested it. I've had it now for two days and sit in it for 6 to 8 hours a day. First impression are: Quality Chair, leather appears thick, but supple. Workmanship is good. The stitching is done well and looks strong. Assembly was easy and instructions were helpful. Up and Down Controls work Well Lock for lean back is functional and tension works good when adjusted. Observations: This chair is not a high back chair The chair can lean back about 30 degrees It is real wood on the arms and base. Although bonded leather, this is a higher quality and feel (durable). Why 4 stars: I'm not 100% sold on the comfort of the chair. After sitting in it for a few hours my back and neck started aching. Also at the edge of the seat it is padded high so it does put some pressure on the back of your legs. All in all, I know furniture needs a break in period as anything new does. So only time will tell. I'm hoping after a few months it will break in.The chair it replaced was bought on Amazon too (not a Lazy Boy). It lasted 5 years and at first was not very comfortable but after a few months it broke in, I got use to it, and it was fine. I'm not sending this chair back. It is a nice looking chair, built well, and functions as it should. May 31, 2017 UPDATE: Chair is starting to teeter at base when locked. I tried to to see if some bolts became loose but there are no bolts Just a large pin that it rotates on. Something is bending and I am concern it will become worst. Reduce the my rating by one star. But added a star for comfort. UPDATE: After 2 years the chair is now broken and leans to one side. I weigh 190 lbs. This not acceptable and I would not recommend this chair. Also, after 3 years the bonded leather starts cracking and peeling off. Sad that lazy boy puts their name on this product!

This is exactly the kind of chair I would expect from Lay-z-boy. Was super easy to put together. Nice real wood accents. Very comfortable. Very well built and sturdy. I weigh about 235 and the chair is very comfy and works for my 6'-2" height. Some people complained that the chair squeaks. The leather squeaks like all leather furniture squeaks. If you don't like the sound of squeaking leather, don't buy this super-comfy well-built LEATHER chair. I will buy this again when it wears out in a few years from constant use. Office chairs usually last me about 3 to 4 years before I need another one. Will buy this one again if it's still being offered. The only drawback is the lumbar support is too soft. May need an additional lumbar pad if you have lower-back issues. Great chair! One of the best I've ever owned.

Like so many of us that have transitioned to working from home, I turned to Amazon to provide a high quality chair for my long hours in front of my computer. I researched and read through so many reviews until finally committing to this Lazyboy. It’s a very nice chair. It’s comfortable and yet elegant. I feel like I’m the CEO when sitting in it. A couple of points that I want to draw out. It’s a big chair and wide. Perfect for my size at 5’9 200lbs. I kept the arms off so that it can fit at my corner desk. It’s still supportive and I can lean back to rest my head. The chair has a slight slouch position which I had thought would be an issue. But it actually does not hurt my lower back. For the price and the amount of time I spend daily in it, I think I made a very good purchase. Glad I didn’t go with mesh or ergo chairs.

Excellent

Had been waiting a long time for this chair to become available to the Australian market. Have not seen it anywhere else. Solid wooden frame with a metal spine. Quality leather and foams. Great feel and comfort. Everything you would expect from the La-Z-Boy. Timeless look. Should last for decades.

I was told this would need no assembly and when I received it. First it was in a big box and I opened it up and guess what it needed assembly. It came with no directions at all. It was poorly made and The bottom where the coasters go was unfinished. I didn't want to get Slivers in my carpet or in my feet. I was shocked at how poorly made this item was. It also took me over a month to get a refund too. It also had too many plastic parts. I have done assembly work most of my life. Plastic does not make a chair good. I have a chair I bought from Lazy-boy and it is falling apart but guess what it is 30 years old. Cheap and way too expensive for what you get. I would not buy this chair even fully assembled. Do Not Buy. It is a waste of good Money.

I spend most of my time sitting at a computer, my old chair was causing back and hip problems, this one so far is perfect, It was easily assembled and top quality, Time will tell, could be that extra star 😊

Ce fauteuil la-z-boy fut acheté en septembre 2018. Il est très confortable et je l'utilisais quotidiennement dans mon bureau comme psychologue. Mais je suis très décu par ce qu'il y a eu un bris majeur dans la plaque de fixation à la base du fauteuil, après 7 mois. Trop compliqué à réparer. J'ai même changer le piston espérant que ca règle le problème; ca n'a rien fait. Très complexe de tenter de rejoindre le fabricant. Comme le fauteil était devenu tres instable, je l'ai mis de coté et acheté un autre fauteil similaire à $200.00 . Inutile de Payer $500.00 pour un fauteuil La-z-boy. C'est payer pour le nom.