One For All Fixed Ultra Slim TV Wall Bracket (WM6411) - Screen size 32-65 Inch - VESA 100x100-400x400 - Flat

Best tv bracket for flat to wall took 2 people to attach tv due to it being large have 2 televisions on these brackets now and would highly recommend this product

Very well made and easy to fit to the wall but there are a few things to consider. 1. It is very tight to the wall so any cables sticking straight out of the back of the TV may hinder the install. With my Samsung TV we had to dig a little hole in the wall where the power cable is, to make it fit. 2. If your TV is 32 inch the bottom of the bracket sticks out below the TV. 3. It didn't come with the correct screws to attach it to my Samsung 32 inch TV.

Thin at wall bracket on the market and much cheaper than currys

Probably the thinnest mount on the market. Relatively easy to install although the wall plugs and screws supplied are no use in plasterboard. The integral spirit level is hopelessly inaccurate and can be clicked off the mount and discarded, strongly suggest using a proper level. The TV is difficult and fiddly to fit on to the frame without someone to give a helping hand. Generally very pleased.

Good quality bracket, however fiddly to hang the tv required a few spacers to get the angle correct for the tv to slot in. Patience needed but once up very solid

It's a smart looking, very slimline wall mount, that should be easy to install but isn't. Attaching the horizontal hanging rail to the wall is easy, with the right wall plugs (supply your own). Just take off the supplied 'spirit level' (which is totally useless) and use your own. And attaching the vertical brackets to the back of the TV is simple too. But then hanging the TV by the vertical brackets onto the rail on the wall - that's almost impossible! The supplied instructions and video make it look easy: just present the TV to the wall at a slight angle so that the hooks on the brackets engage with the groove in the top of the rail and the TV hangs, then lower the bottom of the TV towards the wall so that the spring-loaded clips in the brackets engage with the groove in the bottom of the rail. Except.... ...in reality, they have got the dimensions and angles all wrong, meaning that the top of the brackets hit the wall before the hooks engage in the rail, unless the spring-loaded clips are open. So while trying to hang the brackets over the rail you also have to SIMULTANEOUSLY pull down the 2 strings to open the spring loaded clips, otherwise there is no way the brackets will engage with the rail. This means you need 3 people to mount the TV: 2 to hold the top of the set against the wall, and 1 more to pull down (HARD!) on the 2 strings to open the clips. Ie 2 people supporting the set and trying to keep it in position while the 3rd person is pulling DOWN on it very hard! Eventually we managed it with a £400 lightweight, 40" LCD TV. Gouges in the wall from the brackets, lots of swearing. I can't imagine trying (or wanting) to do the same with a heavy £2,000 55" OLED set. Now it's on the wall it's quite nice, but their designer needs to learn about clearances and tolerances.

Does exactly what it says on the tin. Very easy to set up.

Nice simple design which only requires two drill hole mounting points. This makes a nice change from other over engineered brackets which take little account of light modern large screen panels which really don’t need multiple heavy duty fixings. Three points to be aware of though - which makes this for me a 4 star product rather than 5 - as these points were not explained very well in the instructions. 1. The vertical brackets which clip on to the horizontal rail have to fit flush to the wall even when tilted slightly forward. If there are any obstructions - e.g. edge of a power socket, They won’t clip on properly. 2. The vertical brackets did need a bit of encouragement with a flat screwdriver, to Unclip and tilt. 3. Having got the Rail absolutely level and then attaching the tv and the vertical brackets, I was dismayed to find the TV was nowhere near level. After a lot of head scratching, I finally figured out that there are two adjustment screws right at the top of each vertical rail which you can use to level up the TV. They ship (at least in the kit I received) with one side fully open and the other fully closed, hence the TV listed quite badly. Easy to adjust and actually quite useful feature - but why wouldn’t you explain this in the instructions? Otherwise pleased with end result.

Se nota la gran calidad del soporte y la tele queda muy pegada a la pared tal como indica la descripción. Si tenéis que colocarlo en alto tened paciencia porque al estar tan pegado a la pared resulta complicado dar con la posición en que queda bien anclada.

Es el segundo q compro, buena calidad, fácil montaje con nivel ya incorporado. Lo mejor lo plano q queda la TV qué por los laterales queda muy bonita.

Lieferung kam erwartend schnell und auch die Anbringung war sehr leicht mittels mitgelieferter Schablone. WICHTIG: Bei einem großen Fernseher ab ca 55 Zoll sollte man mit zwei Personen den Fernseher montieren. Das heißt aber auch, dass man sich über die Verkabelung schon im Vorfeld klar sein sollte. Etwaige Nachrüstungen sollten dann auch immer zu Zweit gemacht werden, damit der Fernseher keinen Schaden nimmt. Je nach Zugänglichkeit der Ein- bzw. Ausgänge ist es nicht möglich, diese im hängenden Zustand hinzuzufügen.

Einfach und problemlos im Aufbau und erfüllt voll den Zweck als Wandhalterung für den Fernseher.

pratik, kullanışlı ve kaliteli