ESR Armorite Screen Protector for Apple Watch Ultra 4 2026/3/2/Ultra

5 month update. The color match is still a convo starter. Saved me a few times from possible scratches. As many pointed out it pops off if it gets snagged, but the solution there is to avoid it getting snagged in the first place, don’t want to damage your $800 watch. Mine popped off 3 times but each time I was able to replace it, looks good as new but you have to use one of the sticky tabs that comes with screen protectors to remove dust and lint before reapplying. Works like a charm! 2 month update: Still going strong. Slight scuff mark after a pretty substantial brush up against the edge of a wall but it’s only visible from a certain angle with light reflection as seen in the 2nd photo. From time to time I have to do a close examination to ensure the thing is still on my watch, it’s that inconspicuous! Besides the impact that resulted in a mild scuff mark, it’s exposed to the thumps and bumps of everyday use and it never dislodged, no surface scratches. Still 5 Stars almost 2 months later! Seriously! The best feature is the finish and color, blends right in like a chameleon. Application was flawless. Position, drop, press center. That’s it! No bubbles. For dust free environment apply in bath room after running hot shower for a min or 2. Tap and swipe response is unaffected, in fact, it feels exactly like the watch glass. There’s really no aesthetic or functional difference. It really does look and feel like it isn’t even there! Quite an improvement from the prior screen protector I had with plastic cutouts for the buttons and the scroll wheel, reminded me of a Spartan helmet! I would buy this again and do highly recommend!

So full disclosure, the first package I got, there were issues getting these to adhere correctly in that there seemed to be a few small areas missing adhesive. This resulted in a few little speck like areas that one could potentially confuse for tiny specks of dust preventing adhesion, but under a macro lens it was easy to see that wasn’t the case. Just some areas that wouldn’t adhere 100%. I got in contact with ESR support and they quickly sent me a replacement no questions asked. Lacy with customer support is the best! Upon receiving the replacement, I did the install again taking care to properly follow the instructions (as always) and this time I got a perfect installation. It’s been about 12-15 weeks thus far and no issues at all. Still perfectly adhered, and amazingly scratch free which is saying something since I’m constantly bumping and scraping my wrist against random surfaces lol. Aesthetically, the fit and finish is outstanding. I completely forget it’s on there. Looks 100% stock. Very little to nothing about it says “aftermarket screen protector installed”. You just forget it’s there and go about your life bumping and banging into stuff with no consequence. If you really sit there and stare at it, yeah it’s noticeable then. Otherwise, it’s very understated and any change to the app dance or profile of the Ultra is minimal, at best. And it’s inexpensive! For me, that’s peace of mind well worth the price of admission. Shout out to ESR. I now have cases or screen protection products of their design on my iPhone, iPad, and Apple Watch. They’re really making some great stuff, and have begun to replace the use of Spigen products for me. UPDATE: 12/27/24 I’ve had the same protector on my Apple Watch Ultra for over a year now, and I’m honestly surprised it looks nearly perfect. No air bubbles, still completely adhered, no scratches or wear to speak of honestly. I’m impressed. I still have the other protector in the box. Ain’t had to use it yet!

Almost a perfect color match for the watch. You cannot tell there’s any difference unless you shine a bright and look at it closely, and even then, it’s difficult. It does indeed come with two in the box. The metal is attached to the screen protector. Just clean your watch and snap it on. Easy. No adhesives that I can see. It looks like it’s part of the watch. I bumped my arm into things all the time, I’m constantly worry that I’m going to scratch up this $900 watch like I did my old Apple Watch. This really helps give me some peace of mind. The screen works perfectly after install. No issues with touch sensitivity. It covers the entire screen. I haven’t tried it in water yet, but I don’t see any air bubbles, so it should work. Overall, I would say that this is well worth the money.

⭐️⭐️⭐️⭐️⭐️ Excellent Protection for My Apple Watch Ultra I recently bought the ESR Armorite 2-Pack Screen Protector for my Apple Watch Ultra 3, and I’m very impressed. Installation was straightforward with the included frame, and there were no bubbles at all. The protector feels premium—smooth to the touch and very responsive with the screen. What I like most is the durability. It’s tough and scratch-resistant, so I don’t worry about knocking my watch on gym equipment or while working outside. The fit is precise for the Ultra series, and it doesn’t interfere with the side buttons or crown. Overall, this is a solid choice if you want reliable protection without sacrificing clarity or touch sensitivity. Plus, you get two in the pack, which makes it great value.

These are fantastic and well made, I absolutely love them and they do a fantastic job of protecting the watch as well as being easy to see through and still use the touch screen. Would be fine stars except they tend to come off a little easier than I would like and because they match the surface of the watch so well, it’s very difficult to tell when they fell off.

Oh, where do I even begin with this absolute travesty of a product? The "ESR 2 Pack Armorite Screen Protector for Apple Watch Ultra 2/1" – and I use the term "pack" with extreme sarcasm – has managed to achieve a new low in my experience with tech accessories. Firstly, let's address the elephant in the room, or rather, the missing elephant in the package. This is advertised, in bold letters I might add, as a two pack. Imagine my delight upon opening the meticulously sealed (and clearly lying) packaging to find a grand total of one solitary screen protector staring back at me. One! It's like ordering a pair of socks and receiving a single, lonely foot warmer. The audacity to call this a "2 Pack" is frankly insulting and borders on outright false advertising. But the disappointment didn't end there, oh no. Naively, I proceeded to install the singular screen protector I received, hoping against hope that perhaps the quality of this lone survivor would somehow compensate for its missing sibling. The installation itself was unremarkable, though the edges didn't seem to sit quite flush. Little did I know that this was a harbinger of the impending doom of this pathetic excuse for screen protection. Fast forward a mere eight hours. Eight measly hours! I was going about my day, completely unperturbed, when I felt a slight tickle on my wrist. To my utter astonishment, the vaunted "Armorite" screen protector had spontaneously decided to stage a dramatic exit from my Apple Watch Ultra. It simply popped off. Just like that. No bumps, no scrapes, no extreme sports – just a casual, unceremonious detachment from the very device it was supposed to protect. And now, the final insult: this flimsy piece of "metal" refuses to adhere back to the screen. I've tried cleaning both the protector and my watch face meticulously, applying pressure, offering it gentle encouragement – nothing. It's as useful as a chocolate teapot, a soggy biscuit, a screen protector that can't even stay on for a single workday. So, to summarize this catastrophic experience: I paid for two, received one, and the one I did receive decided to abandon its post within eight hours. The ESR 2 Pack (cough, cough) Armorite Screen Protector is not just a disappointment; it's a complete and utter waste of money. Avoid this product like the plague. You'd be better off leaving your Apple Watch Ultra completely naked than entrusting its precious screen to this unreliable and falsely advertised garbage. Consider yourselves warned.

I recently purchased an Apple Watch screen protector, and while it is a high-quality product in terms of design and functionality, the accompanying instructions left much to be desired. I received this recently ordered screen protector for my newly purchased apple watch a couple of days ago. It arrived in one day (I am a bit impatient when it comes to these types of purchase) and is very well-designed. It fits my Apple Watch perfectly, covering the entire screen without affecting the touch sensitivity or display clarity. The material feels premium, hoping to provide robust protection against scratches and minor impacts (I have only had it for a couple of days). Its edge-to-edge coverage is seamless, and it doesn't interfere with the watch's aesthetics. However, the installation instructions are a bit confusing and some of the text instructions do not match the pictorial instructions. The manual included with the protector was poorly written and lacked clarity. At times, the instructions seemed to contradict themselves, adding to the frustration. Having said that, the installation is so easy that the instructions are not a significant part. In fact, the easy installation process (absent the confusing instructions) is one of the attractive features of this product. For that reason, I still give it a 5* rating and encourage the manufacturer to improve on the instructions. This Apple Watch screen protector excels in design and ease of installation. Once applied, it maintains the watch's functionality and appearance and hopefully protects the screen for a long time. If the manufacturer could improve the clarity of their instructions, this would be a nearly perfect product.

I normally don’t write reviews, and especially long ones, but I had to on this product. I have used this screen protector for the Watch Ultra for over a year. I previously had used a regular screen protector, but wanted one that looks like it was made for the watch. With the titanium border, that fits perfectly around the watch, it looks exactly like the titanium color on the watch, and was the exact kind I was looking for. The glass is very strong, I haven’t had one crack before, which is saying something, since I am moving around a lot. The install is very easy, and I haven’t never had even on bubble on the screen when or after installing. I have had one fall off, due to catching it on something. But, since it comes with 2 in the package, I was set. Overall, I am very happy with this product, and all the products I have purchased from this brand.

問題なく簡単に付けられました。 耐久性等の検証はこれからですが、初期の印象は良いです。2枚セットなのも安心感がありますね。写真はいずれも施工後です。オリジナルの状態と差異なく違和感もなく良いんじゃないでしょうか。

一枚目は少し気泡が入って失敗しましたが、２枚目は成功！ 付けている感じもなく、ふちをしっかりガード、いい商品です。

Ottime! Sembra quasi che faccia parte dell’Apple Watch per quanto è ben fatta..

Super unauffälliges Displayschutzglas, das perfekt zum Design der Apple Watch Ultra Titan Natur passt. Das Schutzglas samt seiner Einfassung ist nahezu unsichtbar. Die Farbe der Schutzglaseinfassung ist extrem identisch mit der Farbe des Apple Watch Gehäuses. Die Apple Watch lässt sich damit auch wunderbar bei Kontakt mit Wasser nutzen, da im Vergleich zu anderen Displayschutzhüllen, kein Wasser unter den Displayschutz gelangt, was zur Folge hat, dass die Bedienbarkeit nach Kontakt mit Wasser oder nach dem Schwimmen nicht eingeschränkt ist. Andere Hüllen muss man entfernen und das Wasser zwischen Hülle und Apple Watch entfernen, damit das Display wieder korrekt reagiert. Das störte mich extrem. Deshalb hatte ich mich für diesen Schutz entschieden. Es ist, als würde er auf der Uhr kleben. Lässt sich allerdings innerhalb von Sekunden problemlos rückstandslos entfernen. Einziges Manko: bleibt man mit der Apple Watch bzw. dem Displayschutzglas ungünstig irgendwo hängen, kann er sich lösen und abfallen. Ein erneutes Anbringen des selben Schutzglases war mir nicht möglich, da er dann nicht mehr haftete. Gute dass es eine Doppelpackung ist. Fazit: Fast perfekter Schutz, der unauffälliger nicht möglich wäre.

I was looking for something that can not only protect the watch screen but also the edges, as that's the part that always takes most of the damage. But I didn't like any of those bulky plastic cases either.. This was the best solution, it doesn't look like i have any extra screen protector on my watch now, at the same time it's fully protected. The colors and finish are perfect match, been more than a month and no issue at all. They even give you 2 screen protectors in one pack!! The installation was super easy, only need to be careful to not have any dust on the screen just as any regular screen protector installation.