ORZLY® OnePlus 5T Screen Protectors (x2), Pro-Fit Tempered Glass Screen Protector TWIN PACK for OnePlus 5T (Full Screen Coverage) – Transparent Screen/BLACK Frame

I was worried after reading the comments that the product will not be good. However I took the risk and I can say that it fits perfectly. People saying something about bubbles just can't apply the protector properly. I was using bumper case (included with OnePlus 5T in the box) to align the protector. The only difference from original protector (I had 3 of them) is that this product is slightly smaller than the original one, hence the alignment is more difficult.

Edit: after contacting customer service for support. They immediately dispatched a set of replacement screen protectors. I fitted the new protector and it fits perfectly now. A week in and it has not peeled or lifted at the edges. It's crystal clear and feels just like the original screen not a cheap plastic film. Great support and they have clearly listened to the reviews and fixed the issues with their product! The screen protector does not stick down to the edges of the screen properly. Dust will get into the gap and make the screen dirty meaning it will have to be replaced. I think it'll last a month maybe if I'm lucky. Disappointing, otherwise appears ok.

I use Orzly screen protectors on all my devices, they are great. The reason i gave it four stars is due to the process for applying the screen onto the phone. To say its tricky is an understatement but once applied I will give them 5 stars, but the process is the only reason for losing one star. My advice, read the instructions very carefully, there is a reason you get two screens in this pack. More than likely you will need to scrap one and start again.

These seem to have glue all the way across - this is far better than all the others I've used with glue in the borders - they've all had rainbow effects present and dotted grids that are visible when the screen is off. This has neither thus far. The screen protector does not cover the curved edges of the glass, and does slightly cut off the edges of the dispay - however the official one also does this. You save £10 or so on the official one and have the edges exposed. This I don't mind, as the glass has a nice edge, so it doesn't feel sharp to the touch. The edges look as though they melt to the display - this protector looks and feels better than any other I've tried. I have installed 5 protectors on this device now, and none come close in quality and ease of installation when compared to this. You might see some of my other reviews on other protectors on Amazon - this is the most positive one I've given. If you don't want to spend £20 or so on an official screen protector, but still want quality, buy this product. Would highly recommend to anyone with a 5t, and will buy again if the two I have get broken. A very happy customer so far. A quick note - one of the protectors did have some dust or hair on the sitcky side. I don't think it was my doing, but it doesn't really matter - I peeled the protector off, removed the dust and stuck it back down with no issues. And if that doesn't work, you've got another protector at the ready 😉

One of the screen protectors had dust under it, but the other one was fine. I guess compared to the official screen protector that OnePlus sell this is still good value for money even if you only get one that is useable, it's just a shame that Orzly seems to be struggling to get rid of the dust problem.

I had the original OnePlus protector, which worked well for 6 months, then I dropped something on my phone and cracked it. Didn't want to pay the high price + shipping, so ordered one of these. Unfortunately, it did not work for me. Tried the two that came in the pack, both left a bubble down either side. I contacted Orzly support, who were quick and helpful to respond, and they sent me another pack. I took this to a local phone repair store to see if they could make it work, but they had the exact same problem. Seems like the phone's screen is slightly curved, but the protector is not quite curved enough, or the adhesive is not strong enough. Anyway, returned for a refund, and I've now ordered an original direct from OnePlus. 5 stars to Orzly for their quick and helpful support, shame about the product!

Last week, I was a butterfingers and dropped my phone. RIP official OnePlus screen protector, you did your job very well for the three weeks I had you. I went on Amazon and bought a replacement, the Auckly. Hello, unsightly rainbow effect and dot matrix. I went back to Amazon and bought the Topnow. The rainbow effect returns, and this time the dot are sparkly like rainbow glitter! Also, neither of these crap screens are terribly oleophobic. I finally did the smart thing and did some research before settling on the Orzly. I just installed it and hurray, no rainbow, no dots, and no rainbow dots. The oleophobic coating is also much better. The only criticism I have is that other viewers are correct in saying that the borders are a touch too small -- the sides are cut off a bit and it can be difficult to see, for example, things like scrollbars. However, I'll happily take that over rainbows and glitter dots. Otherwise, it looks and feels very similar to the official OnePlus protector - so had I done the research and ordered it first, it really would have saved me money like I'd originally intended to do. Though unlike the OnePlus protector, this comes in twos, so it's still a bargain.

Disappointed with this product. It feels nice quality but the screen protector doesn't fit well and bubbles around the edges, plus there's a thick black bar which cuts off the sides of the screen. It doesn't quite fit the screen length ways either- if the protector lines up with the bottom of the phone then the camera is slightly cut off and vice versa. When placing I had a rainbow effect that wouldn't smooth out so I had to lift the protector to remove this - of course dust then got underneath which was frustrating.

Le meilleur verre trempé, il est compatible avec les coques orzly et ringke, personnellement j'ai une ringke, l'application est facile par contre il faut bien cadrer le verre ( moi j'ai mis le téléphone dans la coques et ensuite j'ai mis le verre) après la pause si il se soulève sur les côtés lors d'une pression sur la coque c'est qu'il est mal posé ( ce soucis n'existe pas avec les coque oneplus et les coques orzly) si il y a un trait blanc sur les côtés il y a une technique pour les retirer, protéger avec du scotch les côtés de l'écran pour le rendre étanche et passer avec un coton tige humecté d'huile d'olive les côtés qui adhère mal ( le fameux trait blanc) nettoyé avec du lave vitre et retirer le scotche et c'est impeccable ( cette technique est valable sur tout les écrans en verre qui on ce défaut d'adhérence) là communication avec orzly en cas de soucis est excellente, pour moi c'est le meilleur compromis, l'écran est bien protégé le tactile est parfait sans parlé du prix par rapport au verre vendu par oneplus.

Posso confermare che si tratta di un ottimo prodotto perché: 1° ben confezionato; 2° perfetto per OP 5T; 3° facile da montare, seguendo la procedura e gli accessori di pulizia non rimane alcuna bollicina o pelucchio...non avendo più una mano ferma e una buona vista da vicino lo ho riposizionato per 4 volte fino ad essere soddisfatto del risultato e dell'allineamento; 4° è fortemente oleofobico, dopo 2 settimane di uso costante posso confermare che, quando riesco ad accorgermi delle impronte o strisciate, si pulisce in un attimo senza dover usare per forza alcol o detergenti. Anche se è previsto il suo decadimento per uso, avendone provati tanti in questi anni, ritengo che sia il migliore mai usato. Soddisfatto+++

Pro: verglichen mit den 25€ für die Originalfolie und Schlag bar! (diese ist mir grundlos weggeplatzt) Knappe 6€ pro Folie gehen absolut in Ordnung! Zudem verdunsten Fingerabdrücke super, was das Handy nicht so Schmandtiger aussehen lässt. Contra: Nicht 100% passgenau (siehe Bilder), was bei einem Stück Preis von 6€ aber verkraftet ist und mit einem vernünftigen Case (in meinem Fall original Silikon Case von oneplus) nicht auffällt, da die Caseränder die gebildeten Kanten unzugänglich machen. Fazit: Mit Folienspachtel und minimalem Geschick gut aufklebbar ohne blasen und dafür daß ich diese Folie 4 Mal kriege im Vergleich zu einer oneplus Folie eine klare Empfehlung!

OnePlus 5T comes with a thin plastic screen protector installed. I waited a few months until it got scratched up then I replaced it with the official OnePlus tempered glass protector. Fit and finish of the OP version is great. Having recently smashed my phone between my handlebars and a tree, I went back to the OP website only to find that they no longer sell the tempered glass protector. So I "took a chance" (not really, it's only $12 for two) on this version by Orzly. The fit is perfect if you are using the free clear case that comes with the phone (which in my opinion is the best protector without going fully enclosed, or being so bulky that you don't even want to take your phone with you), and you should put the phone in the case to center the protector correctly during installation. The holes for the camera, proximity sensor and earpiece are spot on as well. Not clear to me from the reviews I read, this protector has full adhesive so as long as it is installed correctly, you won't have a rainbow effect. Poor quality protectors I guess will only have adhesive at the edges so there's a constant air gap and the plastic exhibits a polarized rainbow effect (like oil on water). I was thankfully able to install this protector without a single bubble or piece of lint or otherwise, under it. Aside from a dust free chamber to work in, wear tight fitting, thin, powder free exam gloves, meticulously wipe down your phone, the case and everything in your chamber. Completely cover your bare phone screen with clear packing tape. Don't leave the tape on it for more than a few minutes and use good quality tape that will peel off with no residue. This will leave you a perfect dust free surface that you can carefully place the screen protector on to. The glass will naturally adhere to the screen and will start to stick, moving from one edge to the other. Using the included plastic card, you can push the air gaps together and off to the edge of the screen. Any persistent gaps can be worked out over a few minutes by pushing them together and off to the edges. Trouble: You put the protector on and there's one pesky piece of lint under it. You can carefully lift the protector off, handled by the edges and use the included Orzly tape strips to gently remove the particle. Hold the tape in such a way that you can place just a small section of the tape on the particle and lift straight up. You don't want to shear the protector's adhesive, otherwise you'll damage it and will see it.

Al fin un cristal templado en condiciones para el Oneplus 5t, he probado varios y la mayoría por no decir todos dan pena, este además de cubrir la casi totalidad de la pantalla, no presenta halos ni matriz de puntos, ni pega sólo por lo bordes como muchos. No hay pérdida de sensibilidad como le pasa al oficial por ser tan gordo (0.6 mm vs 0.24 mm de este) y estaba bastante más barato cuando lo compré, ya que era un producto Prime, ahora ya no lo es. Volved a hacerlo Prime! En resumen, un gran protector para el Oneplus 5t , por no decir, de los mejores. Un último dato importante, debido a los bordes negros, el protector se come un milímetro más o menos a los lados de la pantalla, pero en el día a día no se nota para nada.