QWORK Self-Leveling Cement Tool Kit, 9" & 20" Spike Rollers with Scraper and Spiked Shoes for Cement, Mortar & Floor Leveling

April 2024 review. While the pieces aren't the highest quality, as a DIY bathroom re-do, it did plenty good for our needs. We did have to hijack a spare broom handle laying around to attach these pieces, which was fine. The price beat out a competitors's pro kit, which included a mixing barrel which we didn't need. Tip: To mix up the leveling compound save your lungs and wear a respirator mask. We also drilled out a hole in the side of a 6-gallon bucket and inserted/duct taped a shop vac hose attached to a cyclone unit then to the shop vac (See 'how-to' vids online). We turned on the vac when dumping the mortar into the bucket to cut down on dust everywhere. This is because our bathroom is on the second level and we didn't want concrete dust everywhere and it was winter so we couldn't mix it up outside. The spiked shoe plates didn't break under the weight of our son's 140-pound frame. Not saying how much weight the plates will hold, though. They do seem cheap. But if you want affordable tools that will work to give you the level surface you need, this kit should be fine. I can't arrest to how it would work on a large job like a basement floor, though. Since our house was quite 'settled,' the floor was 1-1/4" off North to South. The type of morar we choose stated that it worked up to 1-1/2 inches deep, but on a plywood base, a mortar primer and metal lath had to be put down first. I, believe some mortars allow admixes for a more stable base, but only if the depth is no more than 1/2". Because ours was off by so much, and we were laying down on plywood, I'm glad we did the lath, even though it was a pain, AND using the spike roller really helped to remove the bubbles as we were spreading the mortar out, esp since the depth was 1-1/2" deep. I'm glad we took a chance on this kit.

My hubby and I bought this because we were self-leveling our primary bathroom and we needed equipment. This had all the equipment we needed such as x2 spiked rollers, spiked shoes, and a scraper. All we needed was a pole for them to fit onto. The spiked shoe plates were easy to install. I highly recommend.

For the price it wasn't a bad buy if using once. The shoes are not comfortable and hard to stay on if you're walking alot. Over all not bad

Cheaply made. Do not purchase this without a handle because the scraper broke after trying to insert a wooden handle in it. The problem is, there is no thread in any of the metal roller frames for any type of handle to be inserted. So, when I inserted a wooden handle in it, I had to secure it with duck tape and this caused the bottom heavy metal part of the scraper to break. I tried to purchase a third party metal handle like the ones they have in the full kit, but without threads, it wouldn't work either. I lost money and my project was delayed.

Good Enough for 1 job! Really helped get the self leveling concrete evenly spread. The rollers where decent and what got the job done. The foot straps broke (poor stitching) and the metal screed was hard to use since it kept flexing because the wing nut just didn't lock the handle angle in enough.

The only thing we used in the kit was the smaller roller brush. If our job had been bigger, we might have used more of the tools. Very complete with everything you would need.

Absolute must have when doing any kind of lvp install. I flew once I got the hang of it with the block and the bar. It also came with spacers that were the perfect distance for expansion gaps

I wish the attachment was stronger. But worked geeat

Compre este kit, excelente, productos en mi proyecto de aplicación de autonivelante, gracias, se los recomiendo, gracias

I'm actually quite impressed with this kit! It is made to be used for several applications. This is not a one and done type of kit by any means. For the money I'm happy!

Used this product for self leveling for my basement floors. Only down side was the attachment didn't have threads end. Great product overall

LOS PICS PARA LOS ZAPATOS NO SON FACILES DE COLOCAR, EL JALADOR DE BAJA CALIDAD SE SAFA LA LAMINA DENTADA

Lo complicado es que no trae manual, para armar cada pico es muy tedioso y no explica cómo se ajustan a los zapatos.