2 Ton

Nice bit of a kit, well made !

I bought the 2 tonne version to get more reach, used it to lift a 3rd of a tonne lathe on its stand in my workshop, could of hired one I suppose but it will be useful for moving other machines, I tried it on my bandsaw first as it had a lifting hook on the top, worked no problem, think thats around 1/2 tonne. The good things are the way it packs away, easy to use and value for money. Things that could be better are the casters, a bit stiff to turn under load but my concrete floor isn't that smooth so that wouldn't help. Info states 6 swivel castors not on mine 4 swivel and 2 smaller fixed which are off the ground during use but when folded up come in to play, thing is they are splayed out causing drag, should have been swivelling. with the castors under the box section at the front its 200mm up which just worked out for me but I had to remove a lathe panel, I expect this would't be a problem if you bought it to lift an engine. The build instructions are hopeless, think mine was for a different model but I got there in the end so don't trust them. the finish is good, the box seems a little thin in some areas, I wouldn't like to overload it. Over all it works well enough and is good value for the money. very happy with it.

Bought this for my husband, he loves it. It was easy to put together and to fold up to store. Carried the mini engine no bother. Very sturdy.

Not used to lift anything ....yet. Chinese made and distributed from UK. Instructions are very poor and miniature - so will need magnification to read. DONT rush into assembly as you'll make a mistake as as lot of bolts very similar in size. takes a bout 1.5 hours on your own and can be done by one person. with simple tools. also handy to have the purchase page on amazon open as the castors can be an easy mistake to make as are the short castor bolts (obvious when you look at it) - but if you rush you'll use the wrong castors in the wrong place or wrong length bolts.....so my advice is take your time. only small mechanical competence required to assemble. good solid product and has 8t jacking force. Well coated and everything required arrived ok and delivery was super quick - thanks to seller DHL delivery. overall quality is very good solid piece and well made castors for carrying weight.

Well, needed a way to lift a 40kg roof tent on & off a Jeep Wrangler single handedly safely, that also didn't break the bank and this was 90% there. Brought the 2 ton extra weight model, as it adds to the safe usefulness, margin (At very little extra cost. Just added an extension box section to the arm & it works well! A bonus, it may even get used as an engine lift, one day... But as far as needed, this was the most cost effective route. It is also surprisingly well made for the money. Better still is that it is easily folded into a compact, small footprint for storage.

Instructions for construction very limited and the few that were there, were smudged and just about unreadable. But once the jigsaw was completed, a sturdy well made article.

Very well made got to build it yet had to wait 2 parsel one day and 1 2 days later the delivery drive left it out side I sed bring it in the house he was not happy at all I got 100 more deliveries to do you no he did do in the end

Item is stable and put together easily. Failed without my signs of leaking with load under max weight. Unsafe an not recommended