BitFenix BFC-PRO-300-WWXKW-RP - Prodigy Mini-ITX Cube Case - Arctic White

This case is fantastic, looks beautiful, the white on the metal and the plastic matches up perfectly, which is something you don't see very often.Pro's: Tonnes of space to mount Hard drives. You can fit up to 9 hard drives if you wanted too, not that any ITX board I know of goes up that high. (5x3.25inch, 4x2.5inch) Loads of space to mount fans. can mount up to 5 140mm fans. can fit 2 280mm Radiators. Power supply is kept in separate compartment so not much heat is transferred into the rest of the case. VERY well built, I'd would say this case could stop a bullet, the side panels are >1mm thick steel.Con's: Not a lot of room for cable management, recommend getting a short modular power supply. The Hard drive cage cannot be turned around you can take out the cages but not reverse them. So, when I installed my graphics card I had to remove 3 of the hard drive bays.Would Highly recommend this case, I love it and anywhere I bring it people always ask me what it is. Excellent case. If you are not going to be using the hard drive cage, you could remove it put your cables in there during transport and it has two convenient handles on the top, so you can transport the whole case, cable and all inside this little box.

The case is very roomy, super pretty, feels quite sturdy and there's lots of space for storage, which is the main reason that I bought it.There are two issues however:* 200mm front fans are not supported (screw holes won't align, see photo), according to their customer service. That contradicts the specs on their website and here at the time of posting this. I was instead advised to go for an "industry standard" 230mm (instead of a 200mm Noctua). The only 230mm fans available are made by BitFenix and the airflow isn't great according to the reviews.* The 5 HDD bays are exactly 30mm from the front of the case. That means that it is actually touching any fan that is 30mm thick (ie. like the Noctua 200mm ones). You don't want 5 vibrating HDDs to be touching a fan.

Fantastic little PC case. Very roomy if stripped of all internals. Corsair H100i fits perfectly up top with a front 230mm fan. In addition I squeezed GTX 1080 FE with an little room left. M2 drive fits nicely under mobo. Case provides very good airflow. Huge plus is plenty of accessories are available for this case.I gave one star less due to wobbly bottom stand made out of quite flexible plastic. Otherwise I'm quite happy with case but I would not buy again. Currently considering swapping it for a mid case so I can build a proper water cooled system.

This is an awesome case, in every sense of the world. The amount of expansion and features it has for a mini its case is amazing by any standard. It can house an open-loop water cooling setup with mounting points for 240 and 120mm rads. I have a 120mm closed loop water cooler cooling an i5 4670k, and I have had no issues whatsoever with compatibility, in my opinion it is well worth purchasing a mini itx board and this case. as it gives you a wide range of features by any standard, and its transportable if your into lan parties or whatever. Its very quiet and looks badass. This motherboard mounts horizontally so installing components is MUCH easier as you don't need to tip the case on its side and then back upright to do cable management. The only down side isn't a problem with the case, but the fact that you cant have sli on a mini its board, but single card setups usually are more compatible anyway. Would highly recommend this case to anyone trying to put together a setup and are considering mini itx as an option.

Brilliant case. Bigger than you'd expect for a mini ITX case, fits a standard size PSU and my gargantuan CPU cooler without problems. Build quality is excellent, it really looks like a premium product, and actually pretty easy to install everything and manage your cables when you get both side panels off (thumb screws so no mucking about either). You'll want to get the 230mm Spectre fan to go with it though, it's a bit of a faff to install but provides excellent, quiet cooling.Special mention should go to ADMI Ltd who quoted me 3-5 day standard delivery - dispatched the day after my order was placed, delivered the following day. Great service, will be ordering from these guys again.

It looks fine in the photographs but in the flesh its useless.It has flimsy plastic feet that are nowhere near strong enough even before the case is loaded with hardware.Mine arrived damaged (no fault of the supplier, who made an immediate refund) and one look was enough to convince me to find something different. Delighted I did. I now have a Corsair Vengeance case, which is far superior.

This case is actually pretty amazing (i'll explain why only 1 afterwards) there is a lot you can move/take out and has space for 5 fans in total 2 x 120mms in the front and the same on the top, it is possible to put either a 120 or 140 in the back for the exhaust. The PSU bay is built with space either side and inside for the cables on a normal ATX PSU. You can remove one or both of the drive cages and it is possible to also remove the disc drive bay altogether. I was fitting this with an MSI 1060GTX AERO edition and being able to remove everything and build in only what i needed made this a really good case to build in.Reasons for the lack of 1 star comes literally because I have bought four other cases in my life... 3 Corsair and 2 bitfenix (including this one) and the quality of the bitfenix cases are adequate but not great. The screws seem a bit cheap in places and for a similar price I got the Corsair 380T which also supports a lot of fans but came with a controller. Most ITX motherboards have 2 fan connectors one for CPU and the other for case. This means by not adding in a controller your giving 5 potential fans with 1 possible connection... Only reason I bought this to replace said 380T was because an idiot broke the panel and this was easier than getting a replacement.Back to the positives though its small, light, multi options, lots of space but lacking a little in quality for the price.

Looks great. Nice and small.

Ich besitze schon länger einen Alienware PC mit sehr guten Komponenten und wollte mir einen kleinen, schönen und leistungsstarken mobilen Mini PC zusammenbauen. Die Möglichkeiten sich kleine Gehäuse kaufen zu können sind wie Sand am Meer - > jedoch habe ich mich für dieses Gehäuse entschieden da die zwei anderen die ich geliefert bekommen habe einfach minderwertig sind.1. Gehäuse wirkt sehr edel und qualitativ (Freude und Bekannte äußern dies)2. Viele Möglichkeiten trotz des kleinen Körpers viel zu verbauen.3. 2 vorinstallierte und leise Lüfter vorhanden.4. Staubfilter an der Bodenplatte verbaut der sich durch einen "Klick" herausziehen lässt und gut führbar ist.5. Durch die Bügel an der Oberseite kann man ihn gut hochheben und tragen.6. Der Preis ist angemessen und für die Qualität zu 100% vertretbar.Ich persönlich würde jedem dieses Gehäuse empfehlen.

La doy 5 estrellas porque cuenta con puntos fuertes a su favor.- Excelente estéticamente, es muy llamativo.- Acabados de punta, tanto en materiales como en medidas.- Se aprovecha de manera muy eficiente el espacio que hay dentro.- Altamente personalizable se pueden quitar piezas que no se necesiten, se venden piezas diferentes en internet y hay muchas guías de cómo modificarlo si se desea hacer.- Su compatibilidad con hardware es la mejor que puede brindar un gabinete de su tamaño.- De diseño pequeño y de fácil manejo, lo cual lo hace perfecto para llevarlo a convenciones o LAN Partys.

Il prodotto è davvero eccellente sotto molti punti di vista: esternamente è costituito da una sorta di "plastica gommosa" (pannello frontale) che da un ottimo grip ed è molto piacevole al tatto e alla vista, come il design in generale (molto fine e armonioso, ricorda i prodotti Apple). Molto generoso negli spazi interni: presenza di 5 bay per dischi rigidi da 3,5'' e ben 9 per SSD (2,5'') già dotati di adattatore; superficie per montaggio di scheda madre parallela al piano di appoggio in modo da non far soffrire la forza di gravita ad un eventuale dissipatore aftermarket; ricircolo di aria ottimo grazie anche alla possibilità di asportare uno slot per HDD/SSD (si perdono 3 bay, ma ne restano a sufficienza), come pure alle due ventole da 120 mm in dotazione. possibilità di aggiungerne altre due sulla parete superiore del case, come pure sostituire quella frontale da 120 mm con una di taglio maggiore; alloggiamento alimentatore sperato dalle altre componenti. Unici "difetti" sono delle rifiniture non ben levigate e le sedi di alcune viti non perfette (la vite entra male per intenderci). Per il resto un dei migliori, più capienti, funzionali ed eleganti case mini-ITX presenti sul mercato.Consigliato!

Vengo de una thermaltake y en calidad diría que esta es bastante mejor y eso que ya hace sus años me costo bastante mas cara.Me gusta la colocación de la placa en horizontal y el montón de posibilidades para colocar ventiladores y el aprovechamiento de los espacios. Muy bien acabada , no me extraña que para muchos de los que quieran una caja relativamente pequeña, pero que le quepa de todo y bien, estén detrás de ella .