KSP 2-4" Upper Control Arms for Tacoma Runner 1995-2003 Old Model,Front Control Arm with Flexible Ball Joint for Toyota N180 Prerunner,Adjuatable Aftermarket Arm Replace for Stock fixed Suspension Arm

Good replacement for 07 Ram 1500, fit well.Easy instalment.

they are very well made and easy to install

It was the perfect fit and looks good, didnt take a picture but believe me, looks good.

Installed these on my 11th gen f150 with a leveling kit already on the truck. Installing the nylon bushing's was easy as long as you install them with grease. However the grease zerks refused to point forward. Thats the only reason I'm giving 4 stars.But looking at the performance, these have been amazing. These KSP upper control arms have replaceable ball joints where as Ford didn't. The ball joints these came with are greaseable and feel very good quality. After they wore in, they adjusted my camber to where the wheel sits basically perfectly. Combined with the OCPTY parts, these are a very good budget option for control arms for a leveling kit or just rebuilding your front end.Also on a side note, the KSP window stickers they came with sucked and didn't stick. I'll change this to 5 stars if you send me a better sticker 😂

So far I love these upper control arms. I put on a 3” level and added these arms due to the new angle. They fit perfect on my 2007 F150 STX. They are nice and beefy and look really nice. A little bit of putting together but easy enough that you most likely won’t even need instructions. I would definitely recommend buying.

Came loose less than 200 miles after install. Alignment was completed, everything checked out. I then had symptoms of a bad bearing, turns out it's the UCA coming loose.There's no cotter pin to hold the nut on for these, which means if they come all the way loose, you're risking catastrophic failure. Luckily I was able to notice an issue before it completely failed.Will be returning these and going with ones that are more secure.

Pretty solid UCA’s. Put these on with a rough country leveling kit and so far it rides 10x better than stock. Overall these feel super sturdy, probably gonna need new shocks before I replace these. The zeros are my only complaint, wasn’t able to get on side spun around so it will be a pain in the butt to grease later.

2010 f150 5.4 xlt went for 35 inch tires with 18 inch rims and they rubbed bad and the truck could not drive in 2 months which led to buying and installing 3 inch ksp level kit which led to replacing entire front suspension parts (they were 15 years old) then had to get alignment which cost 120 bucks the mechanic said the upper arms will rub you should take the level kit off then someone said get spacers which is what i was trying to stay away from so i bought 1.5 inch ksp spacers which also made the rubbing worse then we had to trim the back wheel with an angle grinder which did improve turning then i was told to buy and install upper control arms for lifts so i bought this ksp upper arm for 2 to 4 inch and i took the driver side apart in under 30 minutes which was a new record for me and as soon as i matched up the new arm to the old arm it was basically the same damn thing i installed the new arms anyway may as well drove around the hood it made the truck turn slower and it still rubbed sometimes i think it may have made it worse its 2am so i might update in the daytime UPDATE: they sent me the shorter arms for 0 to 2 inch i will be waiting for replacements.