Automatic Door Seal - Exterior Door Seal Strip Bottom - Premium Soundproofing and Draft Reduction Solution - Narrow Profile - 36" Inches Cutable to Up to 30" Inches.

It was easy with a router and a block of wood & strong double stick tape as a fence stuck to the router base. Now water and wind can’t blow under door

Pas d'instructions pour l'installation

Good product very well made. Needs a professional to install.

That’s all

This is not quite working as advertised but it's a good concept and it should work if your floor is perfectly straight or if you do a little adaptation. The door sweep drops fine under the door when you close it, but because it's on an aluminum profile which doesn't bend much, it will not make contact all the way with your floor if the floor is not perfectly straight. It will make contact with the high spots and leave gaps elsewhere. The rubber seal which contacts with the floor is not soft enough to absorb level differences. So check your floor under the door with a straight edge before. I ended up bending the aluminum profile to conform to my floor slight curve. I removed a screw on the top of the track that holds the bottom sweep mechanism. Once removed I placed it over the floor where the door closes and bent it carefully until it conformed with the floor, then reinstalled it. It's close to 100% with some very small gaps. If you have gaps larger than 3/16" this might not work. I think they have another product with a softer rubber seal that might work better. The company has a good customer service. They sent me a replacement, more sturdy, but I had to bend the profile anyways. it would work better if the rubber seal was mounted on something flexible, like windshield wipers.