Aclorol USB COB LED Strip Lights Warm White Led TV Backlight 5V 1M 3.28FT 320Leds 3000K CRI85+ COB Flexible Lights with 1M USB Powered for Bedroom Under Cabinet Kitchen DIY Lighting Project

I am thrilled with these Aclorol COB LED Strip Lights (24V, 50FT)! I was looking for a long strip to put up in my bedroom and these were the perfect choice. Continuous Light: My favorite feature is the COB (Chip-on-Board) design. The LEDs are so close together that it truly looks like a continuous, unbroken line of light, not like the obvious dots you get with cheaper options. This gives a much cleaner, professional finish. Color and Brightness: The warm white 3000K color is exactly what I wanted—it's bright but has a cozy, inviting glow. Great Value and Quality: The price is great, making these the best value I've found. The sticky tape holds up great too, which is often a point of failure on other strips. Highly recommend these for anyone wanting high-quality lighting that looks seamless!

I bought this to add lighting to my 3D printer enclosure. It works amazingly well, and lights up the enclosure so that I can see my prints without issue!

Good LED strip with pleasant warm light. Attached to the back of my TV for soft light glow. Size Works fine for up to 65-in TV. Very simple to install and glue holds well.

these are the brightness of the sun itself. I really like them and if you already have a power bank from another set of lights you can use that. I will warn you though that some light strip power boxes are not strong enough so it either wont turn the lights on or the lights will continually flashbang you until you get a good plug. I also got some dimmers and they work great for it so I would definitely recommend. the only reason it doesnt give 5 stars is because i wish it came with a sheet of minimum specs for buying additional accessories.

Nice and bright. Works great with 3xAA 4.5V battery pack putting out 4.5V. Not sure how long it will last but if necessary I can upgrade to C batteries. Also works with a usb charger plug. No switch so good if you want it to turn on and off via remote or smart plug etc. If you buy these to plug into a TV or other device with usb port - not all ports have enough power to power devices - only to slow charge them or use as a media storage. My TV has 2 usb ports and only 1 is marked as putting out 5V. The other one only puts out half the amount, not enough to power anything. Works great with RF remote I purchased separately to turn on/off, dimming, and also some special effects modes. I think it was like $7 for a 2-pak of them. This strip will also light up submerged in water even though it looks like it has bare copper pads but they are plastic coated. I am using on my RC vehicles including underwater lighting on RC boat. Great for DIY projects. I will probably be needing more of these...

got this as an external light mod for 3d printer works good but can see flickering

The lights are bright and work well, but the adhesive sucks. The adhesive stuck to the lining for about half of the roll before it came off like it's supposed to and I realized what happened. The adhesive also came off unevenly in little patches. You can see the white adhesive stuck to the blue lining in the pics. Even though a lot of the stickiness is ripped off it is still somewhat sticky so I'm going to see how long it lasts, though I don't expect it to last long. It's not worth returning it. It is NOT 3M though

I love inexpensive LED strips because they're convenient when you have a small space that doesn't warrant purchasing a $20+ system with dimmer switch and transformer. I used a spare USB 2.0 outlet as well as a USB 2 extension to create a cold white ambient effect for part of the DIY modernization that's in progress for this bathroom. The adhesive works fine, but it tears diagonally around midway so just be cognizant of that. Otherwise: Bright, proper color, works with any generic USB 2.0 outlet, and the continuous light bar look continues throughout the entirety of the illuminated area and you can't see the individual LED spots. That latter concern is not an uncommon phenomenon with inexpensive LED strips. The 3-ft segment was actually a little bit too much for my bathroom ambient light objective, so I actually soldered the scrap piece to another spare USB cable I had somewhere in my house and used (no surprise) a spare USB 2.0 AC outlet - I gave this little table outside in my backyard (in front of the door, to the left of the photo) a cold white ambient glow. So, I was able to add ambient cold white lighting to two things in my house with the purchase of one inexpensive cable!

Ich habe den Aclorol COB LED Streifen in Kaltweiß (1 m, 5 V USB) für die Beleuchtung eines Regals/Arbeitsbereichs gekauft und bin insgesamt sehr zufrieden. Positiv: Durchgehendes, gleichmäßiges Licht ohne sichtbare LED-Punkte – genau das, was ich gesucht habe. Angenehm helles Kaltweiß, ideal für Arbeitsflächen, Schreibtisch oder indirekte Beleuchtung. Einfache Stromversorgung über USB, z. B. am Netzteil, Laptop oder Powerbank. Flexibel und leicht anzubringen, Klebestreifen hält gut auf glatten Oberflächen. Wirkt hochwertig verarbeitet. Neutral: Mit 1 m Länge eher für kleinere Projekte geeignet – für größere Flächen braucht man mehrere Streifen. Kein integrierter Dimmer. Fazit: Ein sehr guter COB-LED-Streifen mit gleichmäßigem Lichtbild und einfacher Handhabung. Ideal für alle, die eine saubere, punktfreie Beleuchtung suchen. Preis-Leistung stimmt!

Bande à led au top!

Not sticky at all.

Zwei gekauft, beide nicht funktionieren

This light strip is exactly what I needed. It’s bright, easy to set up, and the light is nice and clear without being harsh. I like that it’s flexible enough to fit wherever I want, and the adhesive holds well. The color is crisp and clear, exactly what I wanted. So far, it seems really durable too - I’ve moved it around a few times, and it’s held up perfectly. It’s simple, reliable, and adds a nice touch of light to my space. Definitely worth getting!