

✨ Upgrade Your Glow: Stand Out on Every Drive!
This Car Headlight Tint Film set includes two 120 x 30cm self-adhesive vinyl sheets in light black, designed to enhance your vehicle's aesthetics while providing superior protection against scratches and damage. With a thickness of just 0.15mm and 90% light transmittance, this film ensures your headlights shine bright while looking sleek. The kit also includes a squeegee and cutter for easy application.
| ASIN | B071JN7X49 |
| Brand | QEUhang |
| Brand Name | QEUhang |
| Customer Reviews | 3.5 out of 5 stars 582 Reviews |
| Exterior Finish | Glossy Vinyl |
| Exterior finish | Glossy Vinyl |
| Item Thickness | 0.15 Millimetres |
| Item thickness | 0.15 Millimetres |
| Manufacturer | QEUhang |
| Manufacturer Part Number | QEUhang |
| Material | Vinyl |
| Material Type | Vinyl |
| UPC | 190907022837 |
A**K
Easy to use and decent audi a4 b7
Read many reviews and some almost misleading. I bought 2 packs to be sure. Audi a4 b7. Cut 1 piece and tried to fit wet like some said, total garbage! It doesn't like it so that got binned. Same roll had enough for 2 more lights off it, decided to fit dry with nothing but my thumb and a hairdryer, so easy to use! I went from left to right across the head light not being to gready to how much I had secured, probably about a 1" strip around the light, then went to roughly the middle and worked up and outward in each direction, then the same for the bottom. Do not worry if you get bubbles just pull it up, heat gun back to new and go again. Idiot proof as long as the glass is clean before hand. I didn't use the crap that came with it preferred a Stanley scalpel I already head. Good tint that doesn't affect your light vision and isn't to dark
L**T
Low Quality
DO NOT purchase this product. An absolute waste of time and resources. The product does not go round corners and despite what other reviews say, no amount of heating will stop it creasing. The product itself is appalling quality and comes tightly wound with rubber bands cutting into the film. There are scratches covering the film and even if it could be applied the scratches on the final surface finish would look awful. Avoid at all costs!
K**N
REAL review
This is going to be the realest review any of you will read, I bought the product because I have 12,000 lumin headlights and I'm fed up with people flashing me thinking I have highbeams on, when I got the product it was over packed (huge box to hold 2 thin boxes) as you can see by the pic, I tried using it and went for the water only method because I don't want the risk of a soap scum type think bubbling up under the film, unlike water I know I can evaporate the water out, it went on really easy, obviously there are one or 2 bubbles because I'm not world champion wrapper, but hey, not bothered... My car... So anyway, if your reading this thinking it's hard to apply or bend round corners, then your wrong and don't listen to the other reviews saying otherwise, the only reason it would be hard is if there was no heat, it's a thicker film, but thicker is more durable, it will flex, just heat it up, it works, trust me, if you want further proof, what you see in the pics in my second attempt at wrapping anything, I had a vague idea because I watched tutorials (smart move eh?)... So yeah, clean the light, wet it, stick it, press it, heat it, squeegee it, and cut it neatly and BOOM! you get yourself some cool looking headlights and tail lights (I didn't use the squeegee that was supplied because it doesn't look good quality and probably will cut the wrap? I used one with a cloth end to avoid gouging the material) So I hope you have finished this and feel cosmicly enlightened from all of the naff reviews on here, its easy... End of...
A**.
Not very good...
Tried everything but didn't work with water or on own , waste of money , pay to have do properly..
M**E
Good product
All the people saying it’s hard to use etc, of course it’s hard to use, it’s Vinyl..... just remember to use heat when applying. I’ve used a lot of vinyl in my time for headlights etc and this is equal quality to others. Good product all round. Especially value for money. One pack (of 2 pieces) easily does 2 lights, with a little left over. So would need 2 items (4 pieces) to do a whole car. Will happily buy again.
A**K
Extremely happy, great product👌🏻
A good quality vinyl with the perfect amount of tint percentage which looks great and allows for good bulb light coming through👌🏻 A generous amount of vinyl is supplied allowing for any mistakes and plastic spatula with knife is provided for easy application you just need a little soapy water & a hair dryer
C**N
Completely honest review.
The is an honest review, please vote helpful if it’s helped you. The plastic bands they put round the roll of plastic ruin 40% of the product meaning 40% is useless. Vinyl Wrapping is hard, don’t just buy this if you’ve never done Vinyl wrapping before. The main problem is there not enough to afford any mistakes(you’ll 100% make a mistake if you’ve not done it before. Worth the money if you’ve wrapped before, good quality but as I said rubber bands ruin the product but you could get the creases out via a lot heat. The little smoothing tool WILL scratch the vinyl as you apply, put a smooth cloth over the tool and then it works great. Vinyl it self is cheap but so’s the price, one bad move and it’s completely unrecoverable. If you’ve not wrapped before buy 2/3 of these products because you will 100% make a mistake.
I**N
Think twice unless pro wrapper!!!
If fitting to vivaro van don't bother 4 hours of trying water, water and soap, heat gun, hair dryer still more wrinkles and creases than a 100 year old person.....result torn off and dumped in the bin so expensive cheap scalpel!!! It has a sticky side that sticks to the glass resulting in multiple creases even if using water with or without soap so that makes no difference whatsoever 😠
T**O
Prodotto scadente
Prodotto scadente in quanto riguarda l'adesivo che pur bagnato e riscaldato se si prova a riposizionare (operazione necessaria se applicata su supporto curvo) ,parte del adesivo rimane attaccato al supporto da rivestire con risultato come nella foto. Non facile da usare in quanto non free air (crea bolle) penso piu adatta per superfici piatte e piccole. Una stella perche provando ad rimuovere il film e l'adesivo rimasto sul faro , dopo vari tentativi con diversi prodotti ho dovuto usare una bomboletta spray "togli etichette " rovinando il faro . Quindi anche il danno
P**O
Bueno
Oscurece un 20-30%. Buena calidad, pero el primer día al sol le salieron unas pequeñas burbujas. Lo solucioné pinchandolas con aguja fina. Para mis luces traseras (Opel astra G) se quedaba corto ya que miden 40cm de alto y no me llegaba el film.
J**O
Super
Très bien
S**N
Ok
Buona la pellicola e attrezzi!
C**N
N’achetez surtout pas !!!!
Film d’une qualité exécrable, je n’ai jamais vu un film d’une mauvaise qualité à ce point , film qui est très fin , se déchire très facilement , impossible à travailler , j’ai déjà teinter une vingtaine de phare et je n’ai jamais eu de soucis avec d’autre film , franchement très déçu de cette achat , c’est une honte de vendre de si mauvais film , dommage qu’on ne peut pas mettre 0 étoile
Trustpilot
4 days ago
2 weeks ago