MYLEK Overdoor Heater 2KW Downflow Over Door Air Curtain Electric Fan Heater with Thermostat, LED Display, Timer & Remote Control - Lot20 Compliant (2000W)

Great heater, good output, remote works great, looks very smart. I've ordered a second one.

Wow.super hot 💕easy to set up.nice and quiet

It works well and warms our conservatory quickly (albeit with ambient temperatures still about 12c) and looks quite smart. However, it does make a little more noise than I'd like. But the biggest issue I have, like many others on here, is the remote control instructions. They are far too convoluted. A single button that cycled through off/1000w/2000w/cool/off would be sufficient for most people. It doesn't help that there are mistakes in the instructions either.

fantastic!!! i needed a heat source for the kitchen as there was no radiator. With not much room on the floor this was perfect. No hard wiring, just plugs into a normal socket ( bear in mind the cable is not particularly long approx 1.5m) but fitted perfect for me as we have a socket above the work surface height. So easy to use via a remote,easy to set temps and warms the kitchen in minutes. Not at all noisy obviously you can hear a fan blowing the heat but nothing worth moaning about. Well packaged and fast delivery. I'm very pleased!! I'm thinking of getting one for the conservatory also.

its not cold at all very disserpointed would not recamend at all

Appears to be very good and stylish heater but oh dear try and get your head around the instruction manual. To begin with, the print is minute and I had to print off an enlarged version as a pdf but even then too small, I challenge anybody then to follow the instructions to set two ‘on periods’ for each day of the week. I resorted to ringing the customer service number and a very helpful lady, Emma, with great patience finally got me there. This product should not be sold in its present form.

Well worth it works well

I purchased this over the door heater to warm up a small cloakroom, a floor standing or wall mounted conventional radiator would be to intrusive in such a small room. The installation was quite easy, however it is important to remember (when choosing the position) that although this heater is designed to plug into a 3 pin socket make sure that it is not overloading the protective circuit breaker in the consumer board. Once I had overcome this basic error the heater worked fine and was easy to program and control with the remote and has warmed up a cold cloakroom