Alise Glass Shower Door Hinges,90° Hinges for Glass Door,Brushed Nickel(2P) | Heavy Duty Stainless Steel Cabinet Hinges Wall,Frameless Door Hardware Replacement Parts for Bathroom/Kitchen/Office

This was my fourth order, all from different sellers/manufacturers. All previous hinges had rough edges from laser cut. I was also concerned that, unlike the original hinges installed 16 year ago, none had small adjusting screws at the back edge for final positioning of the glass door. This set fit well and installation was relatively easy and straightforward, other than a second person was needed as the 3/8 thick glass door is quite heavy. I decided to reuse the original 8 stainless steel mounting screws to the wall as the ones provided with the hinges were about half inch shorter. I also added more bearing grease for longer life and then after final installation I caulked around the hinges with silicone. Basic replacement instructions not provided with the hinges would have been useful, but I would still recommend this product.

Amazing quality and look very nice

Hinges are built like a tank! I did not need the self closing feature and I was able to remove the springs by removing the 2 screws on the back. They did not come with mounting instructions but it was pretty obvious looking at the cut out diagram what needed to be done. One note, the diagram calls for 6.5mm (0.26in) holes to be drilled. In order for these hinges to sit flush I needed to use a 1/2in bit. It would have been much easier if I used the 1/2in to begin with 😅

These were too heavy duty for my use. 80lbs is a lot. Great for a shower door but I’m doing glass shutter windows in my shower. I asked for a lighter built hinge but not available. This look great. Function well. Good spring action. Perfect for shower door. Not ideal for lighter weight glass. My glass was 14.5” x 48” x 1/2 inch. About 25 lbs. these hinges were too heavy duty for me. I asked the company for more options. They offered no alternatives

These hinges were purchased to replace two existing hinges on my shower door. As shown in the picture, the bottom hinge had been improperly installed with a massive amount of silicone caulk to hold the glass in place. That resulted a worn out hinge making a loud poping sound as the door is opened and closed. Good thing (not mentioned in the listing) is each of these hinges comes with 3 gaskets (1.5 mm thick each) and with a 8 mm thick glass, the gaskets are sufficient to fill the hinge openning of about 12 mm. I am happy that the hinges are exact duplicates and the door works perfectly after replacement. Just to point it out, it is possible to do an in-place install without door removal if you have 2 people to do it. 1. Loosen the wall mount screws slightly so they can be easily taken out later. 2. Let one person inside, use wood shims to shim the door against the bottom and the side wall to fix it in place. 3. Remove the wall mount screws and the hinge screws. 4. The peron outside can then take the old hinge out and hold the new one in place. 5. New mount screws are installed. 6. Assemble the new hinge plate with the 3 supplied gaskets. 7. Take the door shims out. Note that in step 6, before putting on the plate, it may be helpful to use small pieces of nylon strips to fill any slacks between the glass and the hinge screws. Yes, it is a great purchase and a tremendous value.

Amazing price for this stainless steel hinge. Size in graphic is correct and is sn exact fit to my hinge.

First off, I'm guessing the positive reviews haven't used them long enough to experience the full joy in these shiny little practical jokes. I installed four in my custom walk in shower. Worked great. Until it didn't... The rubber grip kept slipping and allowing the glass doors to sag to the point of hitting each other. Re tightened multiple times to the point of stripping the hex head screws... Still sagging. Then came the rust. Did I mention RUST?!!! Now I realize that I didn't pay for the best hinge available, but what manufacturer puts a mild steel spring inside a shower door hinge without adding a little nickel (aka stainless steel)? The rust got so bad that my marble threshold got stained with rust. So to sum it up... for the $52 I spent on the four hinges I got: rust stains on my marble, lost time for multiple reinstallations, and having to buy the most expensive hinges available to match the holes cut out for these piles of excrement. Bonus? A wife who had patiently endured two years of living in a tiny, moldy rental shack while I personally built our home - who then had to deal with non-working shower doors off and on for the better part of a year while I looked for replacements to match cutouts. Would I recommend these? Yes. I would recommend them to salesmen who cheat old ladies. And to politicians (all of them). Oh, and to rich, exotic prince's who want to give me lots of money after I give them my bank account info. And to whoever owns those robo-calling telemarketing companies trying to sell health care insurance. Did I miss anyone who you would wish these on? If so, by all means let me know so I can add to the list. In the meantime run, don't walk, from these pieces of junk.

Fits and works great!

Excellent product. Pleasantly surprised by the quality

Mauvaise qualité

Il commento riguarda più l’inserzione che l’oggetto in se. La cerniera viene descritta con angolo di apertura di 180 gradi, ma di fatto é di 90 gradi; a guardare bene le immagini si capisce, ma di fatto la descrizione non é corretta e si acquista un oggetto non adatto. Fatto reso senza problemi

Sehr gute Qualität alles top

The title/heading and the images imply that this is a set however this is not the case - the ad is misleading.