Replacement Dual Flush Valve Seal & Clip, SV01967

Two toilet cisterns that were quietly overflowing into the toilet bowl for presumably a long time brought in a really hefty water bill. The water loss was barely perceptible but over time made for an expensive lesson. Fixing the leaks using these flush valve seals was easy with decent instructions provided in the pack. And it was a really cheap fix. Being a perfect fit there are no more leaks (and believe me when I say I pay very close attention to this now that I’ve fixed the problem!). I live in a hard water area so I do now periodically check that the seals are free of limescale and in case of any further damage I keep a couple of spares in my tool box. As these are genuine Ideal Standard products, the value is particularly good.

Genuine product, fitted perfectly and fixed the leaking bowl issue. Job completed in under 5 minutes. I have just purchased 2 more from the seller for the other toilets after seeing the limescale build-up on the replaced one. Quick delivery and item as shown, all in all, great service.

We live in a hard scale area and this tends to make life difficult especially where sealing surfaces are concerned. I have had problems with these seals (and other parts of these cistern types) for some time, although their replacement is quite easy once done for the first time. On this particular occasion I expected to receive the black rubber (I believe) seal but instead received what appears to be a white nylon/polypropylene item, but exactly the same otherwise. As it was labelled as suitable for Ideal Standard (my cistern)/Armitage Shanks flush mechanisms I have fitted it, with good results so far. I've given it four stars as, from past experience it needs sometime to pass before coming to a definite conclusion as to its sealing properties. But no doubt the manufacturers have thoroughly tested the product so the missing star may prove to be erroneous.

This is a genuine Ideal Standard part, and it seems decent quality. It's made of some sort of soft material like silicone and is highly flexible. It includes the mounting clip, which is very useful because it's very hard to remove the original clip without damaging it. It's a very easy item to replace and there are instructions included should you need them. This is the second time I've had to change the seal on mine, and they seem to last a little over 3 years for us before needing replacement.

Fixed the constant running water in both my toilets, simple to replace yourself with very little effort too.

Once I figured out what part I needed to stop a leak into the bowl and what part to search for, I was happy that the solution was just a few quid! Arrived the next day and fitted no problem. The leak is fixed and without having to call a professional out!

Great price and sorted out the issue right away. This is the second purchase of these I’ve made for different toilets and would recommend. Much cheaper than other sellers and easier to identify what was needed for my toilet with their description! Definitely recommend this company as the seals are good quality, at a good price and quick delivery. Toilet overflow was constantly refilling and leaking into pan so the cycle was endless. Also cistern would not fill up or stay full. Quick and easy replacement of this deal did the job!

Purchased to replace the valve seal on an Ideal Standard Pneumatic Dual Flushvalve (SV93467). The old seal was slightly worn and let water run slowly but constantly into the toilet bowl. It’s almost impossible to remove the old clip without breaking it, so it’s good that a new clip is supplied. However, it’s fairly easy to stretch and pull the old rubber seal over the clip - lift at the edge and bend it back. The new seal supplied was easily stretched over the clip and into place. You need to pull it around the edges to make sure it’s seated properly and the rubber disk shoul be as flat as possible. On my first attempt I didn’t ensure it was completely flat and it leaked worse than before. Once rectified, it works perfectly. A very simple, cheap and effective fix for my leaking loo! Wish I’d done it sooner. If you’re not familiar with this flush system, it can be a bit daunting because it’s mostly plastic and you don’t want to break it. My tips: The pneumatic pipes from the push button are pushed onto two round discs on the top. Those discs can be removed easily by twisting anti-clockwise (may be a bit stiff as there’s a rubber disk underneath - it will move slowly). Doing this means the pneumatics are out of the way and you can flush simply by pressing the rubber disc, or the plastic disc underneath if the rubber disc it lifted out. Don’t lose the rubber disc though! The entire flush column is secured by two plastic lugs, one on either side - it’s a bayonet fit (like a light bulb). Carefully twist anti-clockwise and once it’s released the whole unit will lift up and out. Lift it up wards and keep it vertical, as it will contain some water. Tip upside down to remove the water. The rubber seal to be replaced is at the base of the unit. Also worth checking there is no damage to the plastic rim that the seal sits on, and remove any limescale deposits or other debris in the tank while you have the flush unit removed. If you haven’t done it before or DIY doesn’t come naturally, fixing your loo may be a daunting task. Believe me, this is easy and no tools required. It’s easy once you know how!

Perfectl as discribed

Commandé car mes toilettes fuyaient, j'ai commandé ce joint pour son diamètre supérieur à mon joint d'origine qui fuyait même après nettoyage. J'ai recoupé le centre trop épais pour rentrer dans la gorge de maintient. Après un petit ajustement avec ma Dremel : résultant parfait ! La planète me remercie car les petites fuites ne font pas que des grandes rivières...

Mala calidad , Comprado 3 unidades a la vez , no acepta ningún devoluciones !

Nothing to dislike, perfect replacement for old one.

Plus petit que je pensais a l'achat