Full Motion TV Bracket PGLFK1

Very pleased with this wall bracket. Used it to wall mount a 55 inches TV: the bracket comes with a big range of screw options to accomodate different TV models. The installation is very easy thanks to clear instructions, including a wall sticker to help with the holes position. Best part is the build quality: very solid and sturdy, it gives you the feeling of a good quality product. When closed, it sits completely flat. Also, can tilt and turn pretty much in every direction, so the TV end up always looking leveled. Very good product.

Really good product. It's robust, easy to install, and holds my 55inch Tele fine. The wall mount twists left and right easily. I would recommend the product.

So many angles so I can move it however I want and was fairly simple to setup and mount perfect size for my 65’’ tv

First the good points. This mount is very, very sturdy. It attached very firmly to brick wall. It's carrying a 32" TV and shows no signs of the fixtures loosening. 32" is not so heavy so I'm not sure how it would cope with something much bigger. It's actually very easy to assemble. The instructions look a bit off-putting, but once you start, it's easy. The spirit level and HDMI lead are added extras. Once in position, it swivels and tilts magnificently. You can't get 90 degrees to the wall but pretty close to that which is what we wanted. The price is amazing. We went to a branch of Currys and were looking at similar products for £125!! Bad points: they don't provide the right size spanner/wrench for the wall bolts. Be prepared to have or buy your own. Secondly - and this was the killer - once we had everything assembled and fixed to the wall we hung the TV on the mount with great satisfaction and pride only to discover one of the supporting arms that run across the back of the TV was blocking the socket where you plug the mains in. Thus the TV was in a nice place but completely unusable! We weighed up the pros and cons of taking it all down disassembling, packing up and returning. Finally, we decided to take a hacksaw and cut the offending arm short. This wasn't a problem because a) our TV is relatively small and doesn't need arms that long b) we had a hacksaw and the confidence to put it to work. Other buyers may not be in the same position so beware. NB This isn't going to happen with all TVs. Ours is a 10-year-old 32" Samsung. Many TVs will have the mains socket on the underside, the side or even a different place on the back. Don't be put off buying, just check with the seller in advance that it will not be problem with your TV.

I bought this Perlegear TV wall bracket to wall mount a Panasonic TX-P42GT30B Plasma TV. I was very impressed by the quality of the items supplied and how well made the bracket was. There are supplied spacers to move the TV away from the bracket if there are obstructions on the back of the TV, or if the TV has a curved panel. The wall plugs and hex head bolts supplied are very good quality and require a 10mm masonry drill. There are various diameters and lengths of bolts to attach the vertical bars to the back of the TV. There are no fixings for plasterboard which is sensible given the weight of the bracket and TV, maybe the only solution in such cases would be to utilise vertical wall studs. The supplied spirit level is a nice touch, enabling the vertical and rotational adjustments to be set correctly. The ability to swing the TV away from the wall to face other chairs (or the ironing board) is most useful. The most complex part when fitting is establishing the vertical height of the wall holes from the floor. To do this I first fixed the two vertical bars to the back of the TV, then measured from the floor to the desired point on the wall, level to where the bottom of the TV will be. With the wall bracket assembled and the TV face down on the floor, or for plasma panels vertical against a sofa, offer up the wall bracket to the TV bars and establish the distance from the bracket wall holes to the bottom of the TV, add this dimension to the previously marked bottom of the TV mark on the wall. I would say that the task of safely fitting the wall bracket and TV requires two people, for example when marking wall hole postitions using the spirit level. The design allows for a wide range of, back of the TV fixing hole locations, my fixing holes were 400mm wide x 300mm high. I would definitely recommend this wall bracket.

Absolutely top class,fitted 75" onto it ,and steady as a rock,

Really sturdy tv wall mount and cost effective. Purchased this to fit my 75 inch TV to the wall. Was nervous as the TV is big and heavy and this bracket is a lot cheaper than many others. However the TV has been up for a few weeks now with no problems at all. It's very well made and sturdy. I did use a few extra bolts on top of the ones provided.

Well constructed and designed. As long as wall plate is solid to wall it’s super adjustable - height and lateral position.