💡 Light up your space, power your productivity.
The muzha 2 Packs LED Batten Lights deliver 2000 lumens of crisp 6500K daylight brightness at just 20W power consumption. Featuring a durable aluminum body and polycarbonate shade, these low-profile 2FT fixtures are designed for easy push-fit installation and versatile indoor use across offices, schools, restaurants, and workshops. With anti-stun technology and a 2-year warranty, they combine energy efficiency with eye-friendly illumination for professional and home environments.
Brand | muzha |
Manufacturer | muzha |
Product Dimensions | 57 x 6 x 4 cm; 420 g |
Item model number | 120 |
Part Number | 1 |
Number of Items | 2 |
Style | 不拘一格 |
Colour | Whtie |
Material | Aluminium |
Finish types | Matte |
Number of Lights | 1 |
Included Components | 安装硬件 |
Voltage | 220 Volts |
Specific Uses | Home |
Special features | Energy Efficient |
Shade Colour | White |
Shade Material | Polycarbonate |
Light Direction | LED |
Power and Plug Description: | AC |
Switch Style | Touch |
Switch Installation Type | Wall Mount |
Batteries included? | No |
Batteries Required? | No |
Type of Bulb | LED |
Luminous Flux | 2000 Lumen |
Wattage | 20 watts |
Item Weight | 420 g |
Guaranteed software updates until | unknown |
K**S
Real bright lights
These really are great quality lights.Bright, crisp and clear white light that has made a real difference in my garage. These were bought as replacements as two had failed - these ones are much better.Very easy to fit and connect up.I've saved two as spare but, might get another two so all six are the same.I think these are a very good buy.
D**.
Bright, easy to fit and looks good.
Throws out plenty of warm white light.Brackets for fitting the light to the ceiling are very easy to use and are hidden from view and hold the unit very close to the ceiling. This means there is no room for block connectors on the wires if you need to extend them. The hole where my wires come out from the conservatory are not close to where the wires from the unit can reach, so it was a solder and heat shrink tubing job for me.Blends in perfectly with UPVC making this unit perfect for lighting a conservatory.One minor niggle is the printing of the unit's information on a visible part of the unit (see photo).I could cover it with some white insulating tape, but it's not that noticeable really.And what's more, you get two units! The other one is going in the shed.
D**H
very bright
Very bright ligts. as others have said, the cable is fixed (soldered onto an internal PCB) and is only about 6" long so you need to extend it.
J**T
Easy to install and bright LED’s
Lightweight and very easy to install with the mounts provided. LED’s are bright and are a good replacement for the old tube lighting that was previously there. Purchased the four pack and will install the other two in the loft space. Good price and if I need more will buy again.
N**E
Great Alternative to Old Neon Lights
Very bright and a doddle to install. Changed out two old neon light fittings in our kitchen, and very straightforward. The old fixings were completely covered over by the new light. Had to extend the light cable to reach the wires on the light, but that's straightforward, and there's enough gap between the light and the ceiling to do this so that they're not visible (1.5mm lighting cable). Instant on/off, unlike the old neons which flicker for a couple of seconds before lighting up.
M**S
Slim LED strip lights
These lights were bought for my husband for his workshop. They are lovely & slim, unlike the old lights they have replaced. They are a good bright light & have made his workshop lighter. There is no flicker & they start much quicker. At a very competitive price
S**E
Great bright replacement for tube lights, but the fitting was tricky.
I bought this light to replace two old strip lights. The lights are super lightweight and slimline, they look good, and are very bright compared to our old tubes.The issues I had are with the fitting. These lights have two wires to connect, but they only have about 4" of wire sticking out from the end of the light. Old strip lights usually have the wires connected in the middle, so the first thing I had to do is extend the wires by about 60cm using a connector block; the wires are exactly the same length and there is no room for a connector block (let alone two next to each other) so the light couldn't sit flush to the ceiling. Therefore I had to dig a little hole in the ceiling so the block would fit and the light was able to sit flush.If they could improve the design so that the connection wires extend at least to the middle of the light that would be great.
G**E
BEHOLD I have harnessed the power of the sun 🌞
Amazingly lightweight and super bright. I replaced the old fluorescent tube lights using the same power cables. The 4000k temperature is ideal if you plan to work in your garage. Would highly recommend along with some sunglasses 🕶️
Trustpilot
1 month ago
1 month ago