T-Cut Headlight Restoration Kit – Contains Headlight Polishing Compound & Sealant - Restores Light Scratches & Improves Clarity & Visibility

This is great stuff, really easy to apply and the headlights look like new! Much cheaper than a replacement cover. I think it will also be good for polishing light scratches out of a guitar body.

I bought this T-Cut headlight compound because my car lamps are looking really yellow and cloudy, which is actually an advisory on the MOT these days. The tube is a decent 150g size and it feels like a much more reliable brand than some of the random kits you see online. It contains aluminium oxide which is a medium grit, so it is abrasive enough to actually do something without being too scary to use on your expensive plastics. The results are brilliant and it really does restore clarity to the lenses. I find that you have to use quite a lot of pressure when you are rubbing it in to get the best finish. It takes me about fifteen minutes per light by hand, and they come up looking like new and super shiny. It is definitely much better and safer than using random home remedies like toothpaste or Brasso which people always suggest. Compared to a full restoration kit that comes with different grades of wet and dry sandpaper, this is much quicker and less messy. However, if your headlights are really badly damaged or deeply pitted, a full sanding kit might be better because this compound is more for surface oxidation and light scratches. You might also want to buy a separate UV sealant spray afterward, as while this cleans them up, a dedicated spray often lasts longer than just a polish. One slight downside is that the instructions on my tube are in every language except English, which is a bit of a weird oversight. It is simple enough to figure out—wash, dry, tape off the paintwork, and buff— but it would be nice to have clear directions. Also, if you have a lot of work to do, your arms will get tired, so using a mechanical buffer might be easier if you have one. Overall though, it is great value for money and saves paying a garage a fortune to do the same job.

It works, good product, bought a cheaper one never worked, this was easy to use I used a small disc polisher, great result, recommended

Not too sure what to expect, but this is superb. Does what it says on the tin. Cleaned the lights in a few minutes. No problem. The difference was highly noticeable. Would definitely recommend. Please see my before & after pictures. Make sure you get the box with the anti UV treatment in it, not just the cleaner.

This product does a much better ob of cleaning headlights than the suggestions you'll find on the internet for using toothpaste, baking soda, etc, and you can do it by hand, you don't need a sanding drill or anything other than a cloth and a bit of effort. If you are careful with application, you don't need to mask off the paintwork around the headlight. Why not five stars? The enclosed leaflet has instructions in French, German, Portuguese, Italian, Dutch, Norwegian, Swedish, Danish, Finnish, Polish, Arabic, and Chinese, but not English. I found examples on YouTube of people using it, and each of those examples showed the kit including a microfibre cloth, which was absent from the pack I received. This leaves me wondering if the pack I received had been opened previously, a return perhaps. It is hard to know how much sealant to use as it is a liquid and applied with a cloth. Whilst liquid sealant much easier to apply than the spray coat sealants, it is impossible to see which areas have been covered, whether or not multiple coats are required, or how long it needs to dry. Perhaps this is covered in the missing English instructions. The Youtube videos suggest the treatment lasts about six months, though that would depend on how strong the sun is, and whether the vehicle is left in direct sunlight for long periods. The kit does contain sufficient polishing compound for two or more treatments, but the sealant is the big unknown. Perhaps using more sealant initially would reduce the need to reapply the treatment. Again, the lack of English instructions is frustrating here.

The product is VERY easy to use and took me no longer than 20 minutes with the desired results (I used hand power) of clearer lenses. There is enough in kit for multiple uses. I have a Toyota so a known issue - new headlights will be £300ish so this as saved me money, time and effort. See before and after photos.

Is a product that definitely clear the yellow head lamps just by hand application, but is not like the advert says that removes everything, and let the lamps like new, would be better if they add a 3000 sandpaper probably.. other than that is a good product..

Work really well.

Useless. Soap is better. Return process was too cumbersome to follow. Don't buy....save your money.

Es la primera vez que me envían un pedido así 🤦la caja venía tal cual la foto hecha una pena Los botes están bien, parece que no se han tocado.

E' ottimo nel caso di lieve ingiallimento dei fari per fanali totalmente opacizzati necessita aggiungere altro materiale abrasivo

Sehr einfache Anwendung. Auf ein weiches Tuch geben und mit kreisenden Bewegungen auftragen. (Erfordert etwas Druck. Mit einer Maschine wahrscheinlich schneller und leichter.) Überschüssiges mit einem sauberen Tuch wegwischen und nach polieren, versiegeln, fertig. Ich habe für meine Scheinwerfer pro Seite etwas 10 Minuten per Hand gebraucht und das Ergebnis kann sich sehen lassen. Bin gespannt wie lange es anhält. Bis jetzt für die Anwendung eine klare Kaufempfehlung 👍

**This photo is taken right after polishing. I'll have to update later regarding longevity of the process.** This is a 2013 Mazda. My headlight problem is more cloudiness than yellowing. Other products I've tried just have the compound but not the sealant. I followed the directions, but added one thing: I cleaned each headlight with 91% isopropyl alcohol for any grease or residue. Not hard or excessive, just wiped it down. This is the most thorough compound, used only once, not twice, to get the cloudiness under control. Each headlight took about 10 minutes. It didn't seem like the sealant was doing anything (it is the consistency of water). So we'll see what happens. If I have to keep doing this, I may have to go with a good old fashioned spray clear coat. Overall, I'm very happy with the results