ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1.5 mm

This worked fantastic for my XBOX One X and everything is running way cooler. Thank you!

Easy to install and great performance. I installed this into a PS2 fat during a PSU repair and it exceeded expectations.

Bought to repaste a MSI 3080 x trio lhr 12g. 1mm is for the vram chips around the GPU die. Absolutely phenomenal. Not only are they cheaper but the definitely make better contact vs the gelid kit which is actually almost double if not double the price. They also ran slightly cooler. Memory pre re-pad and paste was at 94-97c/ fans 65%. Gelid kit memory max that i saw was 85 at 65% and the arctics was staying at 83 but max of 84 at 65%. Reason for removing the gelids is because i didn't feel like they were making sufficient contact just by eyeing it but i could be wrong. But for half the price and in my opinion better contact and 2c less i would definitely go with arctic!

Replaced the worn/degraded stock thermal pads on my M.2 SSDs in my gaming rig with this 1.5mm ARCTIC TP-3 (stacked a bit where needed to hit ~2.0mm gaps). Big improvement: CrystalDiskInfo shows significantly lower temps now—worth the swap if your SSDs were running hot/throttling. Tips for sizing/cutting: Measure your gaps precisely (calipers help), then cut with a sharp tool like an #11 scalpel or model knife for clean edges. The 100x100mm sheet left plenty of leftovers for me, so small mistakes weren't a big deal—I only tossed one tiny messed-up piece. It's thick but compresses exactly as the compression chart on Arctic's site promises. Not super "sticky" like some pads, but has a nice tacky/moist feel that makes positioning on the SSD easy—no sliding around. Arctic's website support is excellent if you need extra guidance (charts, manuals, etc.). Highly recommend for anyone refreshing SSD/VRM/RAM pads—performs great without the hassle.

Have used Arctics TP-3 thermal pads for many different applications over the years. These TP-3 1.5mm pads were used for Xbox series S and series X video and memory chipsets as well as m.2 SSD’s. Also used these same 1.5MM pads in one of our Lenovo gaming laptops. I use a new sharp razor blade and small straight edge to cut pads into desired sizes. Don’t need to apply an ungodly amount of pressure to cut pads and backing plastic, you can definitely flatten them if not careful. Take your time and have sharp razor blade or scissors when cutting. By all means try to avoid touching the pads itself with barehands you don’t want oils from your skin contaminating them! Over all I can tell a difference by heat output from heat sync and by monitors that these thermal pads do there job well! The Lenovo gaming laptop would thermal throttle after a few minutes of gaming though I installed new thermal paste on cpu many other parts had old dried up thermal pads that contributed to overheating. Would and have bought again and again. P.S don’t forget to order some new thermal paste for your cpu chips as well!

Not bad for the price it helped my series x!

These are great. Easy to cut to size. Redid PS4 slim. No overheating problems combined with top notch paste for the main processor!

I have been working on Nintendo Wiis for a long time and there has been a debate about how to do the thermals. Some say use paste, others say use another pad, others want to go with phase change material. The truth of the matter is that it's built for pads. Thermal grizzly is nice but the pads don't stack well. You will need about 1.2mm of thickness to fill the gap. Enter this pad. These are nice and they are rather high performance for the price. They are easy to use. Just trim what you need. Peel one side off. Plant it down. Then peel the other side off. The pad will expand a bit. Then plant your heatsink down and go. Yea, it's that easy. For what the Wii is this pad is kinda overkill but it's one of the few pads on the market that you can stack up to 2mm without any issues. It transfers heat very well and it's soft enough to fill any gaps. My Wii's not working itself to death anymore and it has since developed a large silence to it. If you need a pad that's thick without a loss of performance this is the pad for you.

Très bon pad thermique. Je l'utilise sur une Rx 5700 XT qui normalement chauffe beaucoup. Elle montait régulièrement à 90°C. J'ai remplacé les pads thermiques sur la VRAM, sur les VRM et remplacé la pâte thermique par un pad résultat: 77°C avec MSI Kombustor au bout de 2 heures de test. Franchement très bon pad thermique.

These thermal pads performed exactly as hoped and without a single headache along the way. I used them to service both my launch-model PS4 and a friend’s newer revision, replacing the original worn thermal pads during a full cleaning and maintenance session. Installation was straightforward. The pads were easy to work with, seated properly without fuss, and compressed nicely once the consoles were reassembled. No awkward trimming issues, no excessive rigidity, no frustrating surprises. Before the replacement, both consoles had reached that infamous stage every long-time PS4 owner knows too well, the deafening roar of overworked fans screaming under even moderate load, sounding less like gaming systems and more like exhausted jet engines preparing for takeoff. After the cleaning and thermal pad replacement, that chaos simply vanished. The fans finally returned to a whisper. Both systems now sound like they did when we first unboxed them years ago. There is very little else to say, and in this case, that is the highest compliment possible. These pads do exactly what they are meant to do, and they do it well. A good choice for anyone looking to revive an aging console without unnecessary complications.

Arctic har aldrig svikit mig förr och denna är inget undantag, grafikkortet (RTX2080) behövde nya och har fått nytt liv igen!

最近のMBに付いているM.2用ヒートシンクパッドと同じくらいの厚みです。

Pâte thermique utilisée pour ma ps4 pro et dreamcast. Nickel et très facile à découper et à installer