Gorilla Heavy Duty Grab Adhesive White 290ml

Absolutely great, value for money, good strengthI used to hold flooring tiles to bathroom tiles to give a panelling effect. Quick to stick but goes off in 24hrs. Only need a smaller amount.

I initially bought double sided sticky tape made by Gorilla and that was just awful.This however is a product that I expect from Gorilla and it's made well.The instructions say you should use a zig zag but I ended up not doing that. I have heat alarm sensors and a lot of electrics above that, so the safest way was to use this. The double sided sticky tape just fell down which meant they had dirt thereDespite that dirt, it still bonded very well, and cured very quickly too. I like that it dried quickly and it actually does work in humid environments. That was my biggy with their other one. This one actually worksThis is very easy to use for people who are both handy with DIY and not too

As described

I absolutely loved this glue, it was perfect for use on the bunker at my workplace to stick on plastic labels to the bunker, very rapid, fast acting, strong and quick drying, I would thoroughly recommend this glue to others if you are needing a strong and durable glue.

Use this when you want to stick 2 big things with large surface areas together. If you want precise and clean application you need to look elsewhere. But if you have a job like I did, fixing a stone wall, this does the job. Does it stick in the tube? Yes Does it get all over you and anything around you and stick if you're not careful? Yes. If you're careful and do the job with some amount of care, does it actually stick heavy stuff together? Yes. And that's the most important thing, because glue should be sticky and this stuff sticks like hell.

This product rescued a diy project that was going to go wrongly if we couldnt stick something down that was necessary for the rest of the project to continue. Really great stuff and cured really fast. Will definitely buy again whenever needed. Applying the glue could be made easier but i understand this is probably because of how thick the glue is.

The adhesive itself does a good job; once it sets, it holds very well. It does take a little longer than claimed to establish the base bond; light strips of wood bonded to plasterboard slipped under their own weight even with a minute's hold.The shortcoming is in the nozzle design. The instructions say to cut the nozzle, use that, then remove it and before the next use, clean out the adhesive dried inside it. The problems are that a) there is no clean way to extract the adhesive, and b) the adhesive in the nozzle does not fully dry in any reasonable timeframe, so extraction is a multi-day exercise. As such, the nozzle isn't reasonably reusable, making it defunct.

Gorilla adhesives have always worked well for me and this is no exception. Easy to use and very sticky