The BEST Meat Injector Syringe Kit - 304-Stainless Steel, 60ml, 3 Needles, Spare O-rings, E-book and Spares Available! The Original Marinade Injector Creates The Juiciest Turkey and BBQ Ever!

The injector arrived well packed in a useful box that allows the parts to be safely stored away after use/cleaning. Small lifehack; Cut yourself three 6cm long pieces of gift wrapping tape and when you put the needles back into the storage box place one of the pieces of tape under the needles so you can easily pull them out again as they are a very snug fit. All the parts appear to be extremely robust and of solid manufacture. When you handle them they give you a reassuring feeling that they will not only do the job but also last for a long time to come. I just tested mine with a large chicken and some very thick Seville orange sauce (cold) and it worked perfectly well. Despite the extremely thick and sticky nature of the sauce the injector proved easy to use and easy to clean. I did remember to use a little olive oil on the O ring washer first though (always read the manual!) or I suspect I may have found it a much stiffer job. I didn't notice when I ordered the item that the original price was higher than I actually paid but I am impressed with the quality of the product and would have been happy to pay the higher price had I known how solid this kit was. I did have a minor issue which required that I contact the manufacturer and they responded immediately and with the highest level of customer service you could ever hope for. Well done! This is an easy five stars for me, thank you.

Having been using inferior plastic injectors for my meat products for a number of years I decided I would treat myself to an upgrade. Lots of research and reading of reviews led me to the Premiala injector. Ordering and delivery went without a hitch. Came well packaged. Eagerly opening the parcel to check contents I was disappointed to find one of the parts missing. A quick email to report the problem led to a very quick and apologetic reply. Missing part was delivered really fast with more apologies for causing an inconvenience. Having read the instructions and prepared the injector, I was now ready to try it out on my bone in gammon joint. Injecting the cure was no problem with the large needle (one with 12 holes). Download the free ebook if you're not sure which needle to use or how to use it. Really pleased with the quality of this flavour injector - really a quality product. Can be used for other food injection projects. I'm going to try my hand at doughnuts and use the injector to put the jam in them. That should be fun and yummy. Would I recommend this product? Yes I certainly would and also the customer service as well as it is excellent. My only tiniest negative and it is nothing to do with the actual product, is that I would have liked the product to be boxed in a nice wooden/plastic presentation box to match the craftsmanship of the flavour injector itself. I can see the cardboard one being damaged over time. Enough of the negative vibe --- if you're after a quality injector then this is the one. And no, I'm not linked to this product or Company in any way. Hope this review helps you to come to a decision.

If you're searching for a meat injector and can't make up your mind which one to get, stop looking. This is what you need. I was originally going to buy a cheaper plastic one until I saw this advertised on another website and I immediately purchased it. As soon as I opened the box I knew I had made the right choice: yes it's a bit more expensive than a plastic injector but it's got quality written all over it. This will not crack, leak or rust and it's dishwasher safe. Everything you need right there including two small brushes which really do a good job at cleaning the needles. Comes with an e-book which gives some very handy advice and walks you through each step of the process. I have already used it a couple of times and it has completely changed my approach to preparing meat. Also received a follow-up email from the company which was nice.This product will last a lifetime and the company backs that up with a solid guarantee. I recommend this item and would buy it again ( except I won't need to)

This is made of top quality materials. Not the slightest hint of corrosion. It is well constructed of top quality metals and silicone. We have used it to prepare our own ham and bacon. You get what you pay for.

This is an excellent product, I can't recommend it highly enough. All parts have a high quality finish and the whole thing has a nice, heavy, solid feel to it. The plunger has to be greased with a bit of oil before use otherwise its very hard to push, but that just shows how snugly the whole thing fits together. The needles come down to quite a sharp point as well, so no need to make a pilot hole in the meat first, which is nice. A day after I purchased this I received an email with the ebook attached, which is very clear and easy to understand, Nice to have some instructions that are written in fluent English instead of being translated with bizarre results for a change. I would also like to add the customer service is second to none. I emailled a question by reply and went on to have a very nice chat about some ideas I may have about future products. Very nice to hear from a company that actually cares about the usefulness of their products rather than forcing their products on you regardless of what the customer wants (Microsoft take note!) I have tried many different products from various sellers all over the interwebs and frankly have wasted lots of money on products that don't work, or in the case of the one offering, went RUSTY!!! I wish I had just bought this one for slightly more money to start with and saved myself a lot of time, hassle and cash!

très bon produit. Je l'ai reçu à temps. Je le recommande

Veramente perfetto questo kit Se ami la buona cucina è indispensabile Facile da pulire anche in lavastoviglie Molto ben accessoriata

Product was as described, decent quality. Used it once without any surprises. You will need to apply a little oil (I used olive oil) on the silicon washer to operate the injector smoothly. One point to note was I found a small iron filing in the centre of the biggest needle, probably left over from the manufacturing process. So clean it well before first use, as you don’t want to be ingesting this!

Mu buen producto, de buena calidad y funcional. Yo lo empleo para inyectar salsa en los asados que hago en la parrilla, la carne queda con un sabor completamente distinto y con una textura que no había experimentado antes. Recomiendo la compra a todo aquel que le guste asar carne tanto en parrilla como en horno, merece la pena la inversión.

Injectors, even cheap ones, are pretty easy to get right. Cheap ones have idiosyncrasies,stuff you put up with because they're cheap. This one isn't cheap, comparatively, but it isn't expensive either, by any means. It seemed to be of high quality in the description, the reviews were good and it had three needles of varying lengths and hole layouts to be capable of approaching about any injection job I'd find myself using it for. I bought it. When it arrived, I was very happy with the quality of the entire package: the injector (most importantly) was made of solid materials, with a good feel, tight fit on the plunger (not sloppy, either at the o-ring on the piston OR where the stem protrudes through the screw-on cap for the barrel), so the unit felt solid in your hand. The plunger and the needles all have high-end o-rings, PLUS an extra set for each piece that uses them! A very nice touch that I've not seen before! The packaging also impressed me with it's form-cut slots for all the pieces so they rest nicely inside a snug fitting foam piece inside a thick box that completes a package you feel reflects an overall wish to provide a good product in every way. I do a LOT of BBQ and smoking of meats, I research my products well before buying and, as a result, have been able to get very high quality products for affordable prices because I shop around and try to shop smart. I want my products to be as good as my food. When I injected my first piece of meat (two BIG tri tips), I used both the big liquids needle (with side holes) and the solids needle (with a thicker shaft and bigger end opening for things like finely ground garlic, herbs and spices) and was pleased with ease of use and the lack of leaks from the top of the barrel, denoting no leaking past the plunger seal. (Injecting a nice hunk of meat in front of your friends, readying for a great evening of company and food, and having liquid shooting from your injector is disheartening, to say the least.) No leaks, no mess, no problem... Well, one little problem; both needles were a bit askew in their threads in the barrel. I noticed a bit of looseness as I'd threaded them in, like the machining wasn't quite the best, but then I remembered that stainless steel, if tightly fitted on threaded components, can be a bit of a struggle to thread due to the friction created by the temperamental metal, so I figured that perhaps they intentionally cut the threads a bit loose because they knew they could count on their high quality o-rings to keep things as they should be. Which IS what ended up happening: though the needles were a bit off-angled when seated, and the threads weren't of the closest tolerances when threading to seat them, there was NO leakage and the unit worked fine. My only real issue was that the needles weren't quite parallel with the barrel when injecting, so I had to pay closer attention to the angle of the needle than the usual. The barrel and the needle were at slightly different angles... I was OK with this because of the price of this unit compared to others in its category. Especially since many in its category seemed to have less features (fewer needles, didn't seem to claim the quality this one did, poor reviews, higher price, et al...) than this did. I was willing to live with the small inconvenience of the needle and the barrel being a tad different because, otherwise, it was a solid unit. Then I started getting emails from the seller asking about my experience. "How's our product working for you?"... "Did you find our 'little extra' useful?"... (they sent a nice little e-book and a follow-up tips email) and, frankly, I found it annoying. I thought it was just another vendor trying to get a good Amazon review by doing legwork on the ass-end of a deal by sending me emails until I get tired of seeing them and do a review. It happens... So, after getting the third email asking about my experience, I decided to mention my slight issue with the unit. I responded as I readied for work one morning (at 3:30 or so PST, USA) and spoke of the alignment situation. I said it's not a deal-breaker with me, but I did find it somewhat conspicuous since the unit seemed of such high quality. Then I finished readying for work and took off. BEFORE I got to work, I received a reply from Greg, at the company, who said he was "sorry to hear about the issue, bla-bla-bla..." Then he did something the usual suspects in the "we're sending you this annoying email to bait a nice review from you on our product" crowd doesn't usually do: he sent input on how to see if it was the same issue they'd dealt with on a few other units. Very simple stuff I should have checked in the first place... 'roll the needles on the edge of a table to see if the threads were straight on the needle' (because I'd mentioned I thought the barrel machining was bad as well, so those threads weren't straight either, creating a bigger problem). Being the cynic I am, I thought it was nice to admit to previous problems of a lesser nature, but I was pretty sure my unit had bigger issues (which, again, I was okay with accepting... but they asked.) I rolled the needles and found that they were all a bit off. Then I rolled the barrel and found it, too, was off. Then I screwed in my needles, one at a time, into the barrel and took photos of the fairly significant difference in angles between the needles and the barrel of the injector. I sent them off. I got an email back post haste that said, basically, "Wow! I've never seen that before. That's not good." I responded that, 'yeah, it could be better, etc., and I like this type of thing to be right. How do we deal with this at this point?' He emailed back that my new unit was in the mail and would be delivered on Monday! (This all happened on Saturday, as I said, in the wee hours of the morning!) I go into such detail here because I have learned a few things buying online over the years I have been doing so (I am fond of sharing that I've been online longer than Yahoo! It's true...). Not all companies you deal with online are legit. We know that. Even the better companies have issues when it comes to customer service. In all the time I've purchased products online I've never had such a response from a company that was obviously not an Amazon, Shutterfly, Zazzle, etc. Big companies KNOW they have to make you happy or they'll suffer. Big companies send you CustServ emails that, when you reply, the name says it's the same person, but you're pretty sure it's a form letter. Even when they solve your issue, you feel they were just making sure they won't get a bad review. In this exchange, I dealt with Greg, every time, and Greg spoke to me of my personal problem with his product, in DETAIL, and went to the next step until he knew I was satisfied! That level of service most likely denuded every cent of profit my sale had afforded him, but he didn't care about that: he cared that I deserved the product they'd promised, and he made it happen. The replacement is perfect. Through it all I was treated as a valued customer. Any time I see this company is selling something I want, I will know that: 1) They are selling it at a fair price, and... 2) If I have an issue with it, they will make it good. You can't ask for more than that! In the future, I will look at those 'annoying' solicitous emails a bit more carefully and consider whether, possibly, the vendor is being proactive and sincere. I will consider the possibility that they are looking to make sure I am happy with my purchase, as it should be. I OWE Greg and this company this review, because they did all they could to make my buying experience positive. And, again, you can't ask for more than that!