R8XM Receiver

Works as described.

Works

It binds and works with my Radiolink T8S(BT) controler and my Jumper T Lite OpenTX radio controller

I connected this to a iRangeX Plus 4 in 1 multi module. Range is good except:When the transmitter is too close to the receiver the receiver get swamped. That is fairly typical. However when this receiver get swamped the motor spun up unexpectedly. That is not suppose to happen and it is a very unsafe issue.After some search I found a work around on the fail safe situation. The work around is to set fail safe on Channel 11 for the throttle. I set a custom curve with throttle at -100. This way the throttle will default back to low when signal is lost.

I'm writing a 5 star review to counter the guy that wrote a 1 star review complaining about his 3rd party Transmitter and this receiver as being "unsafe" There is nothing unsafe about this RX if you use a Radiolink TX as well. Failsafe works as expected. The reason the guy with the 1 star review was having problems is because he was using a 3rd party transmitter and something called a JP4in1 multi-module. These multi-modules are literally hacking the Radiolink protocol and sometimes things don't work as expected. This is part of using a Jp4in1...and has nothing to do with the radiolink product at all! Shame on you Mr. Tsang!