AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

This thing is a beast for the price! I've done stick (MMA), MIG (GMAW), and flux cored with it. I even gave it a whirl with aluminum without a spool gun and it did okay just bird nests easily. Other processes it does great at! I've ran it on both 110v and 220v and it does well on both, however for stick welding 220v is a huge improvement. The stick didn't stick too much on 220v, but was a little hard to get started on 110v even with the anti-stick all the way up. I am certified in both stick and MIG so I'm not new to welding and know what to change when, and I will say, if you've never welded the controls are a bit weird to get used to, but once you get the hang of it it isn't bad. I also tried it on stainless, building an axle back exhaust for a friend, and it did well. I used pure Argon which is not quite correct for stainless, but that's what I had on hand and it worked. Great for a budget welder and good for light to medium duty welding! Highly recommend!

I have never MIG welded before today. I'd ordered the Azzuno 135 gasless welder, before I was amazed to find this model for not too much more money. Cancelled the 135 and ordered this one instead. It arrived quickly, and immediately was stunned at how nicely made it was. Fit & finish were all good, knobs feel quality and all cables etc. seem sturdy. I reached out to Azzuno tech support via amazon, as I'd seen other reviewers mention there's an updated PDF version of the manual. Being totally new to welding I figured I needed all the help I can get. They responded in under an hour with the PDF attached. I had a 2 lb spool of wire that I bought separately, and was able to get it loaded by following the instructions. If like me you're new to this, the spool is similar to a weedeater line, i.e. it wants to unravel and go EVERYWHERE. Once I had switched the feed wheel over to the correct size, I hit the inch button and the wire fed through to the nozzle area. (I took off the nozzle and copper guide tube to make it easier). Put them back on and looked over the settings. I'd assumed that it would take hours of tweaking and testing settings to even be able to use a welder, but no. Simply select your process (I had flux core wire for which there seems to be far fewer settings than some other processes). Select the diameter of the wire from a couple of choices, and that was literally it. I thought I'd have to mess with the inductance dial but looks like that's for experts to override the machine's auto settings. I grabbed a couple of pieces of unknown angle iron and cleaned them up with a grinder. Popped on the ground clamp and wondered if I'd missed any steps, this all seemed too easy. Figured I'd give it a try and troubleshoot if it didn't work, but first pull of the trigger it zapped into life and I ran my first weld bead. Sure, It wasn't beautiful or straight (technique) but it looked like a weld. Keep in mind I have ZERO clue what I'm doing, I don't yet know how to make sure a weld isn't cold or if the penetration is good. I took a grinder to it and could not see where the weld ended and the base material began. Hopefully that's a good sign. It was barely any more difficult than using a hot glue gun. I am absolutely stunned that for this low of a price, and this quick and easy of a setup I've been able to add a welder to my toolset. I'd always assumed I would need to spend a few thousand dollars which was always my barrier to entry. If you're on the fence or are a beginner want to try out welding without spending a ton I would definitely recommend this machine.

Well, I am certainly surprised with my MIG200 welder from Azzuno! I had hoped for a good purchasing experience, but we're all a little worried that there will be a hitch in the process. My 'hitch' was the shipping carrier not providing careful handling of my product. This resulted in a welder received with scratches on it's side (see 2nd image). This of course, was not a fault of the welder, but one of shipping. What you need to pick up on here is next. I contacted Azzuno through Amazon of course, and explained about the shipping scratches, and the booklet that came with the unit which had typing so small I couldn't read it. Being new to MIG, I would need to be able to use a well written user manual, but couldn't read the user booklet. But Azzuno attended to issues promptly. They immediately sent me a link to their user manual in PDF! I did recommend that they place that link on their ad web page. Azzuno also told me that they would replace the welder with a new one, which I received yesterday, double-boxed! The KEY here, if you've managed to stay with me this far is - There are literally dozens of companies out there selling 200 amp 4-in-1 welders, so which one do you go with? Yes the welders are not Exactly the same, but very close, so it ALWAYS comes down to SERVICE. It's not a perfect, so !@#$%^ happens! Therefore, you need to protect yourself with a company that not only makes a good welder, but also offers Great Service. And no, I don't have any associations with Azzzuno, I'm just a happy customer. Azzuno not replaced my welder with a new unit, but did it in a very timely manner. They didn't beat around the bush on it. I give them 5 stars on this because They Earned It. Now, onto the welder! It's a great welder so far Ample size digital Amp/Voltage readouts - a biggie for me 200 Amps - I've already arc welded and flux welded with it, and it was great. Need to get my gas tanks High Quality Cables - another biggie - I'm an engineer) - You could walk on these cables (but try not to) It's a little heavier than I imaged an inverter would be, but I've already made a nice welding cart so ok It performs well, and is an attractive piece of hardware, with the gas input in the rear (wanted that!) Has many 'auto' features (read them on the ad) that you will like, and comes with everything you'll need. All in all, I'm happy with this welder, and more importantly, very happy with this vendor! Azzuno will take care of you...

Like the fact that this welder is able to be set low, so that thin body Sheetmetal can be welded. If there is a negative the machine is hard to set on manual mode, So for now I'm using it in synergy mode. Not very thrilled with that mode. But all in all good welder.

Great welder for the diy’er. Continuous duty cycle on 220v for the most part. Might have issues if you’re welding 4’ of 1/2” without stopping, but who does that. The trigger is nice and it only welds when squeezed, which is great for spot welding. I only do fix, so can’t comment on the gas side of things and why would anyone stick weld if food is an option. Get it!

ممتازه

Muy buen producto precio calidad

FUE ENTREGADO CON LA CAJA DE AMAZZON ABIERTA DENTO LA CAJA DE PRODUCTO CERRADA Y AL REVISAR SIN FALTANTES DE ALGUNA PIEZA PROMETIDA. AUN NO ES PROBADA EN SU FUNCION, SERA HASTA MAÑANA CUANDO SE PRUEBE

al momento muy bien usada para soldar con electrodo revestido mma

Y es difícil contactar al vendedor porque no tiene ninguna dirección