Repa Market 6 Inch Grey Dryer Vent Hood - Duct Cover for Walls - ABS Plastic Protection Hood With Rain Cover and Backdraft Damper - Exhaust Air Dryer Vent Covers for Indoor & Outdoor Use

Fit very well as a replacement for an 18 year old vent that was deteriored. This particular vent doesn't look like it the plastic is as thick as the one it replaced. It may not last as long, but it certainly fit and works fine. No problems at all.

Easy to install and good quality

I had one of those tin flappers that was basically screwed into my siding. That caused distortion so the flapper never closed properly. This vent is two piece rigid plastic. To get it to sit flush with the siding, I used a 4-inch electrical box outlet designed to hold a light fixture. I just cut out the bottom of the box and this vent slipped right in. I know it looks a bit funky, but I now have a solid set up. So, why the 1 star ding? Because the installer popped the unit apart and broke off all the mounting pins. They are really tiny and easy to break off. This meant I had to buy a second vent and it turns out they have no quality control as to color. Both vents were ordered as white but the 2nd one is more on the almond shade. You cannot really tell from the photo, but it's really noticable to the eye. Easy fix would be to paint it or replace the base, easiest is to just ignore it.

It is doing the job it is intended to do. The cover seems to be sturdy enough and so far stays on the mount. The mount could be stronger or maybe a steel bezel inside to spread the load from the screws. It works, just not sure it will have a long life against the siding. The bars at the opening are quite weak but seem to be strong enough to keep birds out. (my main concern). It will not stop 4 legged animals. If you need that go with a steel unit.

Broke after 18m. The vent is held on to the wall plate by a few thin pieces of plastic. Those all failed and it falls off now

does the job and fits well. I had to just caulk it in place

I purchased two different sizes. The flap will rub when snapped together and won't close on it's own.

Apparently there is a specific top-and-bottom to this as well as left-to-right. Easy to install and looks good. Unfortunately I got it upside down the first time so had to unscrew it and rotate it 180⁰ to get the cover to fit back into place. Not a big deal, it's just more of an inconvenience than anything. The flap appears to move freely and closes when no airflow is present keeping critters out. Overall a good product.

It's great has stopped the wind from coming into the kitchen through the vent

Nice and strong made from good quality plastic. Easy to fit.

Tras mucho buscar, encontré esta, que pegaba perfecto con los colores que habíamos elegido para la fachada, y cumplía casi con los requisitos que necesitábamos. Le hemos puesto un trozo de mosquetera por dentro para que no se puedan colar bichos.

Sehr guter Artikel

fa il suo lavoro