CoverTec CoverShield VS1 Gloss VCT and Terrazzo Sealer, Fast Drying, Highly Durable, Long Lasting, 1 gal, Prof Grade

So far, it seems to have worked great on our floor. We put cheap linoleum/vinyl flooring down in our kitchen but they seemed to be scratching easily so we wanted to seal over the floor before we move in. We did do a test coat on two tiles which made them really stiff (exactly what I wanted) and solid feeling.We used a mop with a microfiber pad on it to apply this to our floors. We just poured a lottle at a time directly onto the floors then pusjed it around to an even coat with the mop. Make sure you clean the floor well before (any debris will be stuck there once the sealant dries), and ventilate the area because the fumes are horrible. It only took about 5-10 minutes to apply it, then we waited about an hour to put a second coat on. Make sure you are wearing gloves and that you don’t walk on the floors until it’s completely dry. I’d recommend getting some kind of ventilator to wear. We did thin, even coats and it’s self leveling so that worked out fine.So far, my floors look shinier, are more sturdy and scratch resistant. If I have any complaints further down the road, I will come back and update my review.

Easy to apply with microfiber cloth mop and dries in 30 minutes. Put three coats on new floor. Nice shine. Not to shiny. Product is easy to clean off mop pads. It was so easy I may put on old floors.

Great coverage. Super shiney , dries fast

Easy to apply and looks great, but I question the durability of this stuff. I’m using it on a concrete countertop and a terrazo floor. If I could find something better I’d throw the half empty bottle away.

Used a diamond buffer to clean and polish floors. Applied this product and at first it was amazing, high shine really made my floors pop. But after time of my dogs running across the floor and the normal traffic it scratched easy stains parts are peeling up. Don’t recommend I have to tear it back up again and restart

Durable

Didn't come out glossy. I've used better products but I guess you get what you pay for.

I put 3 coats on part of my floor as a test last night under where the couch goes. It is a night and day difference. All pics were taken when the product was dry. That's not wet! I can't speak to durability but I can say I wish I found this product years ago. I'll be finishing the floors with this sealer today. If it doesn't hold up to 2 dogs and regular foot traffic, I'll come back and update this review..>>>>>>>>>>>>>>>>>>>>>EDIT: After putting down 4 coats on about 500 sq ft, I can tell you that it's fine to use a fan to dry between the coats HOWEVER, DO NOT USE A FAN ON THE LAST COAT! Let the last coat dry slowly. The moving air makes the floor dull-ish. If you let it dry without fans, it stays very shiny! I just didn't want to wait an hour between coats so I used 2 big fans on the 1st 3 coats. It took me about 90 mins total. It looks simply amazing! We've lived in this house for 6 years, staring at dull floors. Not anymore!!! I hope the product lasts because I wouldn't want to do this very often. LOL Also, wear gloves. I didn't on the first 2 coats and my finger nails look like I have glass on them.