Alienware 34 Inch Curved PC Gaming Monitor, 3440 x 1440p Resolution, Quantum Dot OLED 175Hz, 1800R Curvature, White

6900 is about 2000 aed more than original price

Love the image quality and fast response! Didn't buy it for gaming more for watching movies and work, but wanted a good quality screen at the same time. Size is perfect, I have 2x MSI 30" screens and one dates now over 2 years and you can see the difference on the image quality. Technology changes so fast, will see long term if this was a good purchase or not?! 🤔

Upgraded from a 5 year old Acer 34 inch, and holy cow I didn't realize what I was missing. The colors, brightness, and smoothness of this monitor are absolutely phenomenal. I do a lot of sim racing and FPS games where a high refresh rate and good response speeds are important. This monitor absolutely delivers on those fronts. I also use my display practically all day every day for work, and this monitor is fantastic to work on. You may want to turn the brightness down a bit to avoid eye strain, but I've had no issues in several weeks of use. I was a little worried about the glossy panel, but so far glare and reflections haven't been a problem at all. The cable management in the back of the monitor is quite nice in my opinion, and I love having a few extra USB ports to work with. I'm also fond of the configurable lighting. Mine has a wall right behind it, so gives a little bit of ambience when it's dark. I have only two minor complaints, and these have been mentioned in other reviews: - Fan noise It's minor. Most of the time if you're doing anything on the machine - especially gaming - you're not going to hear it. It is there, but it's very faint. Sometimes mine does this annoying thing where one of the fans spins up and down, up and down for a few minutes. That makes it was more noticeable, but over time I've gotten used to it. It's a minor downside for all the positives that this display brings. - OLED Panel Refresh warning A message pops up every 4 hours of use and asks you to do a pixel refresh now or allow it to do so when the monitor goes on standby. For the price of this thing, most people are probably going to want to follow this routine to ensure the panel lasts as long as possible. I'm a little afraid to just turn it off for fear I won't take care of the panel properly. However, this notification can be *very* annoying if it pops up in the middle of a critical point in your game! This is easily the most annoying thing about the monitor, but as with the fan noise - over time I've gotten used to it, and I'm not worried about it being manageable over time. If you turn this off, the panel will still do the pixel refresh automatically when the monitor sleeps every 4 hours of use. Overall an amazing display. Mine arrived quickly and without a single dead pixel. My jaw literally dropped when it fired it up the first time, and it dropped again during my first gaming session. If you can deal with some of the downsides of an OLED display, this monitor is very much worth a look. I love mine!

La verdad es que dados los precios alzados de la gran mayoría de los monitores OLED ultrawide, éste es probablemente el mejor. Muchos se quejan del ruido del ventilador, yo no oigo nada. Muchos se quejan del probable problema con los píxeles pero, tienes tres años de garantía con DELL, así que no se preocupen. Lo único que no me ha gustado, es que cada 4 horas debo interrumpír (no es obligatorio pero si recomendable) lo que estás haciendo, para poder actualizar los píxeles. Y la otra, es que el PS5 se ve con la pantalla recortada, es decir, no te da la resolución ultrawide. :/ No puedo creer que me haya durado 3 meses el monitor, y se fundió. No es que no de imagen, es que no da ni energía! Se apagó de la nada. Y DELL no se hace responsable, ya que vivo en México. Qué horror de servicio y producto! Mejor váyanse por el Samsung.

Très bon rendu des couleurs et noir très profond. Bonne vitesse de réaction pour le gaming ,une des meilleurs écrans que j'ai eu. Facile à assembler et à mettre en place , le pied ne prend pas beaucoup de place .

I bought this monitor hesitantly because I usually don't want anything to do with Alienware since Dell bought them years ago out of principle and a usual dislike for all things Dell. However, I needed an OLED monitor because I deal with the medical anomaly of Visual Snow, which includes photophobia/excruciating sensitivity to white light. I'd previously bought an LED smart TV and was running that as my monitor, but, it was traditional LED with backlight which isn't ideal for my condition and lead to things looking blurry, hurting my eyes and made me feel like I needed new glasses because I keep my apartment as dark as possible due to my visual issues. Turns out, no, I didn't need new glasses, despite the size, that TV was causing me severe eye strain even though I wear blue blocker glasses. Sooo, off to searching Amazon for an OLED monitor I went, and, my dear gods, what a search. I was trying to find an OLED that was 27" because space is at a premium, but, was unable to, this was the closest I could find to meet those specs as the other "monitors" I'd seen that were OLED were double the price of this, and, furthermore, were obnoxiously huge.. there's a rant in there regarding monitor size somewhere, but, I've already gone on enough of a tangent, suffice to say, no, I wasn't looking for a 57" pc monitor or anything crazy. Then there was cost, I'd noticed that most of the smaller monitors that claimed OLED were around $3k... Yes, I could've afforded one of them, but, I don't want to be spending more on the monitor than I did on the rig I'm going to be using it for either. This monitor popped up, strangely, as a sponsored ad from amazon that was in the listing but separate, unlike all the other monitors that I was searching which would mention OLED but then, in the product description sneak in that what they were calling OLED was quantum dot on an LCD screen.... Unlike them, this monitor was the closest I could come to my specs. I understand that there seems to be a scalping issue regarding this monitor, when I bought it, it was at the $1.2k price. I hadn't anticipated paying over $1k for a monitor, but, at the same time, this was the best deal on an OLED monitor I could find, and, not to mention, one from a major company instead of a chinese knock off company. So, I bought it, it shipped via FedEx, though, which to me is a problem because, unlike any other carrier, they do not actually have a functional delivery instructions option... I live in a quadplex, it clearly is listed with apartment numbers, FedEx considers the entire property one address, so, even if I could use their delivery manager, it would attach those delivery instructions to the entire building... Especially with something this expensive, I want to make sure it gets delivered to my front door as that's my rented property, FedEx has a bad habit of delivering things to the first floor where the mailboxes are which is not my property and is an actual mis-delivery. Thankfully, though, the package was delivered to my front door and arrived ahead of schedule. The next challenge, though, was the weight... because holy mother of gods, the weight reminded me of my old CRT monitors and the package was far more awkward than them too. By contrast, my bigger LED TV's package was of course bigger, but wasn't near as heavy. It's not an issue if you live on the first floor, but, in my case there are narrow steps that go up to a t-intersection, it was not fun having to lug that thing carefully up the stairs. So, forewarning, a little bit of umph is required for moving it up or down stairs. Assembly is a cinch and shouldn't require any mechanical skills, the most complex part was screwing in the feet of the monitor stand to the monitor stand itself. Now, that stand... I want to take a moment to talk about it... I think the phrase "Graciously over-engineered in a beneficial way" is about as apt a statement as I can say about it. I'm used to manufacturers selling premium products with flimsy additions... especially with monitors, could have a great monitor, but, then you get the monitor stand unpacked and it's just a flimsy piece of plastic that'll probably break, or lead to the monitor topping over... THAT IS NOT THE CASE WITH THIS MONITOR STAND. If I found myself in a fight in my house, and I had enough time to do this, I'd take the stand off the back of the monitor and use that as an improve weapon... I kid you not, it's sturdy enough that I'm pretty sure you could bash in a skull, it's definitely heavy enough. That said, some might consider the weight of the stand a no go... I don't, I see why so much attention was paid to it, it's weight is there to ensure that when you swivel your monitor or adjust height, etc, the balance is always on the stand, and the monitor's weight won't lead to issues of tipping, or moving or anything else, essentially, it was designed to let basic Newtonian physics do all the hard work of making the monitor stable and tip resistant. The stand has some wire control features that tie into the monitor, like some flanges at the back to secure the wires/cables, and a recess at the bottom of the stand for wire routing out the other side. I appreciated that feature because my room is so cable/wire undisciplined, I sometimes feel like I'm living in the storage closet for Doc Ock... having a monitor stand that at least alleviates that concern for itself is always welcomed. There's one concern that I can think of regarding the stand, and that's it's best feature, the weight, if you have a surface you're going to be placing the monitor on which has some weight concerns, check the weight of the unit in the specs above and realize most of that weight is from the stand, so, use that to factor on if it'll cause issues, if it does, a VESA mount is included, although IDK what one because I'm not using it. Now for the monitor, it had a decent amount of ports, a DP, several HDMI ports, some throughput charging USB ports at the base and a few others. My only gripe with this, though, is that the HDMI ports are 2.0 and NOT 2.1.. what that means is that if you're running your rig via HDMI to the monitor, you're locked to 100 hz or lower refresh rate, if you, like me, have a rig that is capable of 144 or higher hz, this may cause a concern or two in your mind. All I can say is that the unit comes with a G-Sync Ultimate module and the hardware to connect it that way. I need HDR, so, I stick with the HDMI for simplicity sake. As far as the monitor itself, it's plug and play, although, there are a few things you wan to adjust when you first plug it in and power it on. You access the monitor menu/OSD by a joystick at the base of the monitor, don't worry, you'll find it, it's one of the RGB components. I cannot explain it that easily, but, getting it to run in HDR mode is a bit of a odd affair, on one hand, windows is supposed to manage that, but, windows was saying the monitor doesn't support HDR... which, of course it does... the OSD menu gives you options for selecting HDR 1000 or HDR 400 True Black... but that doesn't enable HDR... In my case I think the issue is that I've got this connected to a laptop, and so, I had to shut the lid of the laptop to ensure that it wasn't reading as the primary screen. That said, the menu takes some getting used to, not bad, everything is set up intuitively mostly, but, in order to access the full menu instead of the pre-loaded shortcuts (you can change those in the regular settings) you have to flick the joystick towards you (or "up). The options are quite competent with a huge selection of modes to choose from regarding color settings. It is important to note that, at least, as of current firmware, you cannot choose the creators mode option while running the monitor in HDR, that's only available in SDR and I have no idea why. Other than that, the settings were pretty standard, some interesting additions were adding an FPS counter, and timer on-screen... To me that's a novel idea for a monitor, whether it's functional, IDK. What I do know is that I don't touch them. One "feature' I recommend turning off ASAP is Eco Mode. It's currently glitchy and can cause various issues. Now, I guess the elephant in the room is "What about burn in?" It's too early for me to say, and it's also too early for me to say if burn in affects the quantum dots too, hypothetically, since the brights are somewhat handled by the quantum dots, that should minimize burn in for the OLEDs, but, that's an unknown because this is a brand new combo of tech. There are included remedies, though, that are supposed to minimize the risk of burn-in further, namely pixel and panel refresh... Pixel Refresh prompts to allow it to run every 4 hours, during the time it's running, you will not be able to use the monitor, keep that in mind before using the joystick to click okay, for pixel refresh, the maintenance takes around 7 minutes, after which, you may find that you need to manually turn the monitor back on, not a biggie, but, once more, not ideal if you're, say, in a marathon gaming session. Panel Refresh is an older solution that was also included, don't do that unless you're about to go to bed or are going to be away from the PC for an hour, otherwise, the monitor will be unavailable for an hour. Thankfully, you do not need to run panel refresh every 4 hours, it's more like "Run it every once in a while" sort of like the De-gauss function on CRT's. I try to run pixel refresh along the prescribed 4 hours of usage thing, but, since I use my PC most of the day and night for various things including gaming, I'm not going to claim that I'm that great at keeping up with it. Now, for other things that some may be wanting to know about, but that I don't really GAF about... RGB lighting... Yes, it has it, Yes there's an option to customize each component's color, etc, yes it supports Alien sync, no I don't think it supports Aura-sync but don't know because, once more, IDGAF about RGB, aside from if something is advertised as RGB and all that it comes with are fixed LED's that are only one color... that's when I have an issue, otherwise, fancy shifting xmas lights that are fully configurable do nothing to add to performance or increase gaming skills... especially since, when I medicate with maryJ, that'd serve as a distraction... Zones are, the area in the back where the stand connects to the monitor, 2 zones for that ring, the Alienware logo on the left side (when facing the back of the monitor), the power button and the Joystick. The only 2 that are practical for me are the power button and the OSD joystick since that helps me find both in the dark. No... How is the picture? Great. OLED is wonderful in terms of accuracy of darker colors, and, conceivably, the quantum dots help to extend the color profile in ways that OLED traditionally don't. All I can say is that, though white text is still hurting my eyes, it's not near as bad, and my eyes thank me any time a black area of a game or window comes up, because it's actual black and not that annoying backlit "black". I didn't do tests on the color efficiency or anything, Linus Tech Tips and a few other reviewers did, according to them, the claim of 1k nits is true, but, it doesn't hold 1k nits as long as other monitors, or something like that, IDK... seems like the more nits there are, the more my eyes get bothered, the more agitated I get, so, I'm sticking with what I bought the monitor for, gaming with True Black. Would I suggest this monitor? If you're one of those extremely rare individuals with Visual Snow and you can afford it, yes, it's not going to make the "everything I see looks like there's film grain/static" stuff you deal with everyday, but, it will help your eyes feel more comfy in regards to light sensitivity. Otherwise, would I suggest this monitor? Yes I would, for as expensive as it seems, there's not another monitor in the price range that does the job good. So, I'm not a fan of Alienware usually, but, I will say that even though their heat discipline for pre-built pc's, and their component selection for said pre-built pc's are, in my opinion, trash, I am actually impressed by their monitors. Also, apparently, the panel manufacturer, Samsung, has some sort of exchange deal where, after 3 years if there's burn in, they'll exchange this monitor for another one... if that actually happens or not, IDK. Also, final thought, there are additional ports I didn't mention, including a physical headphone jack at the base, I don't know if it'll connect the microphone portion of a headset, though, because I haven't tested it and probably won't, I use a Skullcandy Crusher EVO head set with amazing bluetooth, hardly use the headphone jacks as a result. Oh, and, IDK why they thought this was needed, but, apparently, there's a cooling fan in the back of the monitor around where the mount is, it's internal, I didn't see it, only the exhaust fans, but have no idea why they felt they needed a fan in it... can't tell you if it's noisy or not because I haven't had it kick in, and if it did, I wasn't aware of it because I was wearing my headphones. So, if you were wondering about that aspect, there you go.