BTF-LIGHTING WS2811 Addressable RGB LED Strip 16.4FT 300LED DC12V IP65 | 100Pixels IC=RGB+IC UL Listed Black PCB Flexible Chasing Effect for Indoor Home Decor,3M Tape(No Adapter or Controller)

I ordered 7 rolls to add to my Halloween show. Not one dead pixel and they are very bright. They are controlled in groups of 3 leds, not every single led can be a different color. The two sided tape is better than other brands that I have tried but still will not work for outdoor applications. The tape works great for temporarily holding the strip while you Zip Tie it down. Soldering on the half pads when you cut the strips can be a bit tricky but if you take your time it's not too difficult. I will be ordering more for Christmas to make jumping loops.

These are great paired with some deep channel light defusers & a good LED controller. I've probably order over 20 so far . Great product

I chose this for my first experiment with individually controlled LED sets. The lower cost of the 3-per-pixel setup was perfect here and the results are still impressive. The light is bright and every LED works great on the strand I got. I am using this with a RaspberryPi to make my own effects. There are lots of guides on how to hook up LED strands like this and drive them with the rpi_ws281x library.

The lights work fine and are as described with the exception of the adhesive backing. I purchased two strips of lights and on both when I peeled off the tape on the back there is zero adhesive on the actual strip. All the adhesion is on the tape you peel off. The tape is very sticky but the strip has none at all. I'm mounting mine in an aluminum channel and had to purchase double sided tape to install them. I tried hot glue and it doesn't work on smooth surfaces, neither does adhesive caulking. Get some thin double sided tape or you're not sticking then anywhere ; )

if you need cheap LEDs for project to working on, that’s what I used them for. I recommend them.

Great brightness and ease of use. These are great for long runs if you are using a controller that limits how many pixels. Instead of every light being a pixel it is every three.

I love the lights they respond great with the Bluetooth controller. The patterns the lights put out are everything I wanted. The only issue I had with the lights was the mounting tape. It does not hold well at all. I removed it and went with 3m thin double sided body tape. Now everything is secured. I would definitely recommend these lights but just remember to change the mounting tape and you will be all set.

I use these leds for a small business building wheel rings/lights for the Polaris Slingshot. For the most part they work great. Have had a few problems with a couple rolls not working. Really wish they were a little cheaper.

todo bien

Haven't heard any complaints from my father

La tira de LED es impresionante en calidad y funcionalidad, ofrece una iluminación muy vibrante(tanta que nunca la tengo al máximo) y personalizable. Su diseño impermeable IP65 y PCB negro la hacen ideal para uso interior y exterior. La flexibilidad de la tira permite instalarla fácilmente en cualquier espacio. Es una opción perfecta para quienes buscan crear efectos de iluminación espectaculares y duraderos.

Good quality lights

Fonctionne bien, livraison rapide mais attention à la référence WS2811 la plupart des bandeaux leds sont des WS2812