AC Infinity, AIRPLATE T8 Home Theater and AV Cabinet Fan

This works great. It’s easy to install. Everything is high-quality, including the supplies they give you with it even the templates are sturdy and not made out of paper, but made out of plastic, which is really thoughtful. The fans run super quiet. The temperature control is incredibly responsive. The configurations for the control panel are so easy to use. This is the best product I purchased in a while.

Fantastic product. Very clean looking and works like a champ to cool the equipment storage area of my 5th-wheel. High quality materials!! Installation was a breeze with the templates.

I received my order quickly and packaged very well. Works very well for my purpose with low noise and no vibrations. I use the Auto mode to keep the temperature at 80 degrees. Creates very good ventilation. Air in and out at top of cabinet was my only configuration I could do but works fine for my purpose. Plants are cacti, succulents, tropical species, carnivorous plants. I am very happy with my purchase. I do recommend this product.

I installed this in the door of a half sized media closet where I have a NAS, Router, and a few other electronics components. It doesn’t get real hot but I do plan on installing more so this was more looking ahead. Our of the box, really good quality. Sturdy metal face plates. Included templates to cut door holes which worked perfectly. Set up was very easy. Some extra hardware allows various install options. I fiddled with how to run the power cables and thermostat transducer since the fans are mounted on a door but figured it out. The rest is plug and play. There’s several cooling modes to choose from. I tried them all and ended up using the incremental speed mode. At 80F fan comes on in slow speed. As temp increases, speed increases, and will get to high speed at 100F. Temp is adjustable but this works for the current heat load. Closet usually runs in low to mid 70’s but it’s gone up to 80F on a few occasions. Slow speed kicked in and cooled it back to mid-70’s quickly where it shuts off. I think my Setup could accommodate a lot more heat load. The fans are louder than I thought even after reading the many reviews noting that. They’re basically CPU cabinet type fans you can install anywhere. Although they do seem louder. Although that could be due to where they’re installed. For my application it’s no concern since the closet is out of the way. Could be a concern if installed in the back of a stereo cabinet or something. There may be some tricks you could use for sound dampening. Definitely good quality with good features. Just make sure you consider the noise when purchasing.

These appear to be high quality, are not too hard to figure out, are reasonably quiet, and look nice when installed. I have mine running for about a week now. The only difficulty I had was cutting clean square holes for mounting. The included templates were very helpful, but I had no clue what the best tools were for the job. That's on me, though, but you might watch a YouTube or something if you are not a carpenter. Noise wise, it is pretty good, but a little loud at max speed, if it needs to run that fast which it likely will not if properly sized for your needs.

Using this cool down my new entertainment center housing my PS4 and Xbox. Without it, the consoles overheated and shut down within five minutes of being on. With these fans and unit installed it never goes over my set temperature. I can't hear the fans running either. Install process was easy but a hassle. I had to drill holes then saw around, but it was convenient that they included a stencil thingy to place against the wood and trace out. I wish I'd done it outside though because man, the dust. But nothing a vacuum and lots of dusting couldn't fix. The "auto" setting is what I use because its super easy to set up. There's the option for variable speeds and a window for temperatures. I'm in too much of a hurry to figure all that out so I'm glad there's just a simple "auto" setting for me to use. I set the temp, when it reaches that, the fans turn off. When it drops below, they shut off. I'll set up the variable speed temp thingy later. Overall, I'm extremely pleased. The unit works perfect, the install was painless, and the quality is good.

Very impressed with the build quality of each component. Came with both wood screws and fairly long machine screws with appropriate nuts (wish it came with washers as well) for mounting options. Cutting the hole is fairly straight forward with a jigsaw or router (I used a router, would have been faster with a jigsaw, but I used what I had on hand). The components all have a fairly wide mounting border to hide poor cuts from the front. Looks professional when installed. No needing to worry about hacking together some sort of raspberry pi/Arduino with temperature sensors etc. Everything is already thought out after you have mounted the components (using one as intake, and one as exhaust). 1X USB port for each fan, 1X DC power adapter for the controller/fans, and 1X port for a thermocouple (which comes with a zip tie and sticky zip-tie anchor for mounting. Only reason I'm giving this 4 stars instead of 5 is as mentioned in another review, the controller is pretty dumb even in "smart" mode, and ultimately ends up just getting to your setting temp and then turning on and off every 30 seconds as it oscillates to the setting temp and one degree below. The "smart" mode simply sets the fan level proportional to how far over/under your setting temp you are, but still ultimately runs into the same problem of oscillating between one bar and none every 30 seconds to a minute or so. I'm building a computer desk, and used the IKEA Alex Storage unit as a place to hide my computer tower. This system has the capability of keeping the cabinet pegged right at 75°F with only one bar of power, which has a noticeable hum of the fans with no other noise in the room, but actually is less noisy than the tower outside of the unit is with it's multiple fans. I ended up just setting it to the "on" option, with 1 bar, instead of having it oscillate on/off every 30 seconds, with hopes that eventually I just grow immune to the small amount of noise. Haven't put my computer under any substantial load yet, but if I do, I imagine it will have no problems cooling as I still have 5 more bars of power available (or if I'm doing something really intensive for a while and it still can't keep up, I can just open the front door of the storage unit an drop the temp almost instantly). Overall, this is a good buy if you are going to be putting expensive/heat generating equipment in an enclosed location, and want a professional looking, and headache free cooling solution.

Have this on two different entertainment consoles. Works wonders and looks great. Requires some skill, cutting the rectangle for the mounting of the main electronic unit. You’ll need a drill and jigsaw to do it right.

Good performance. Been using this for several projects.

I have a few of AC Infinity products for ventilation of AV equipment. I would recommend any of their products

Molto soddisfatto dell'acquisto: estramamente ben fatte e silenziose. Il controller è pure molto bello, oltre che ben realizzato in termini di funzionalità.

Works Very Well. Installed It In a Small TV Stand Where My Receiver Always Ran Hot. Probe Placement Is Important Part Of Setup. Excellent Build Quality and Style.

Very happy with my purchase. The fans look very professional and feel sturdy. The thermometer looks cool as well. Seller is very friendly and keeps you updated. Highly recommended!