Seat Slider Track Assembly for Universal Aftermarket Seats | Adjustable mounting rail kit compatible with most bucket seats and racing seats, 7-inch front and after motion

I don’t usually write reviews and when I do they’re usually bad reviews, but these sliders are well built, thick metal, and even hardware is good quality, I was able to fit them on my Sparcos with 0 issues . Don’t OVERPAY!! these sliders are well built .

These worked great to turn my dune buggy seats into adjustsble seats. Pretty straight forward installation. Took a little work, but well worth it.

Bought these to install a seat on a go kart. They are solid but not the highest quality. The biggest issue is that the two parts, fixed and sliding, of each rail set cannot be separated. You have to push each to one end of its travel to put the fastener in the other end, then repeat the other way. There's really only fastener positions at the ends of each part, the fixed and sliding rails. Takes a bit of DIY to fit. And the instructions are almost worthless.

Ok, this is for the Jeep CJ Guys, incase somone planes to put these outstanding sliders in there CJ. They only fit, i would say a little bit, but once they are there I it Awsome. Precice Adjutment is Garnted, on both Driver and Passenger side. First you`d have to get seat riser bracket (passenger) that is about 25mm lower as the original CJ one, because of the Sliders ( 25mm high). You`d have to modify the sliders for the seats just a little, so that they`ll fit perfectly. Then you would have to bend levers first straith then about 5° to the opposite direction otherwise the interfeare with seat. On my seat riser bracket the holes didn`t match at the width, so i had to weld the nuts that came with the kitt to the seat riser. Now it is perfect to slide the seat back an forward, if i need to. Same think is done to the driver side, first i Shortend the Risers at about 25mm ( not neccesery ) but alot better for comfor seating, then weldet the nuts on the riser brackets. The Oringinal sliders has only one locking side, now i have two locking sides, alot better.

Does the job 👍. Doesn’t take up much space. Feels strong enough. One minor niggle is it unlocks in the opposite direction to most car seats, so it takes a bit of getting used to. But I guess manual car seats are a thing of the past anyway 😅

I was initially quite impressed with these sliders for the price. They worked well, sliding smoothly and loving into position with zero slop. Unfortunately after just a couple months of use on my sim rig they have already started to develop noticeable slop.

I will first give you the details. 1985 chevy elcamino, Sparco gt seats and generic ebay monte carlo seat brackets. I was very skeptical because I was using 2 serperate universal components being brackets and sliders. Everything fit great and I had no issues. I will say I had to bend the slider lever to make it work but otherwise everything was smooth. Whats great about this kit that made it superior to the sparco slider kit is the racewill is cheaper in price but similar in build quality, in addition the racewill kit comes with spacers so you able to raise your seat some above your slider to give the slider level more space to move. You get all the hardware you need for the install. I would not hesitate to purchase this kit. I previously purchased the nrg seats but returned them because the sliders they provided did not lock well and I did not want to take a risk like that with such a important component as seats.

I bought these for a sim racing rig. I had nothing but issues from day 1 but I needed them, so I dealt with it. At first, they were so bound up I had to lob a ton of grease in the tracks to even get them to move. I finally got them to move, got it mounted and it never locked in correctly. Now there is a ton of slop, and I bought these 4 months ago (and rarely moved the seat). Just go for a better version, especially if putting in a real car. I could see 1 minor fender bender and the rails unlocking and flying forward. When I brake it feels like it's going to let go on me.

I installed a set on my dune buggy. The seats were directly bolted to the floor when I purchased the car. The slider seat tracks took some time to attach to the seats and floor. Once mounted they function smoothly and provide the needed room to enter and exit. They can then allow movement of the seat to a comfortable driving position.

Buena compra

I bought two thinking that I'll fit my Recaros but i ended up getting original Recaro sliders so do measure your seat widths.

Great product. Good instructions. Screws were a bit too long but easy to find replacements. Little tough initially sliding but loosens up.

Perfect for your simpit :) I use one of these for my seat in my sim rig and use another for my pedals so that I can slide them back and forth. Works great.