Car Stereo Wiring Harness Adapter for Toyota | 16Pin Android Radio Wire Harness Compatible wtih Highlander RAV4 Camry Corolla Land FJ Cruiser Yaris No JBL Amplifier&Canbus

Made installing an Atoto radio in my sister-in-law’s Corolla a breeze. Fit correctly, works just fine. Only way to improve it is a bit of loom tape, but at this cost I can’t expect that.

The CarPlay stereo I bought for my 2006 Camry was originally meant for a different vehicle altogether and didn't have the correct wiring harness. This wiring harness was plug and play into my stereo and had all the required connections to hook up to my car. The pre-stripped wire for the reverse line made it super easy to connect a back-up camera. Few months in, and I have had zero issues with this harness, it's been flawless!

Does not fit the 2012 Toyota rav4 like it says, missing 2 plugs

I’m pretty sure instructions say to check if the black connector connects to your aftermarket radio before cutting it, it didn’t for mine so don’t be alarmed if you have to cut the black connector off and wire it into your aftermarket radios harness. This harness just switches the factory car’s wire colors into the standard color code that your aftermarket radio most likely uses. All in all it worked well for me and came with the three connectors I needed to standardize the wiring! 👍🙃

I plugged it into a 1995 Toyota pickup and a Kenwood radio. The back left and right speakers were switched around. Had it cut and splice and switch the those wires.not too bad. But defeats the purpose of a harness.

Fit was perfect 👍

Would work well with other head units but does not seem to work well with mine (Sony xav ax-1000) some of the pins are on the wrong side to connect

All I had to do is unplug the factory stereo, plug this adapter in the existing wires and then plug it into the new head unit and everything worked perfectly. Super easy stereo install!

Se utilizó a una Scion XB 2008 con una pantalla de 9” china y jaló a la perfección, no tuve que cortar y pegar ni un solo cable. Me agradó que trae también el conector para los controles en el volante, al principio pensé que no funcionarían pero se tienen que configurar desde la pantalla una vez conectado.

Doesn't work and doesn't fit for Rav4

Swapped the stock radio with EONON UA13 and this fit perfectly on a 2011 Toyota Matrix. This provided power, audio connections to all 4 speakers and sterring wheel controls. I had tried 2 other cables before I got this one and has issues either with the ISO port not fitting or issues with the wrong wire connection not diming the stereo when turning on the headlights. All the connectors on this cable snapped in correctly and all the features worked. I just needed to program the steering when control inputs into the new stereo.

Excelente servicio y el producto 👍

Works exactly as expected. Put into my 2010 Yaris after pulling the radio out to plug in my new CarPlay screen only to find I have to become an electrician first. This adapter plugs into the cars existing wiring harness and then into the new screen and everything works flawlessly. It’s what you’re looking for at a great price.