P2200 Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessory Kit 1X 10X

You might not have heard of this brand before but don't be fooled! They make some really good products for a good price. I took a chance and bought some jumper leads from them a while back and they were so good I decided to try a bunch products. I'm glad I did! I've been pleasantly surprised every time and these probes are no exception. If you need some inexpensive but high quality oscilloscope probes these are the ones you want to buy. You will be spending hundreds of dollars more to get anything better.

So far so good. They seem like decent quality probes especially for the price. Pay no attention to the guy that says they don't have a way to perform compensation. He clearly didn't look very hard. I have not tested their 10x bandwidth yet so check elsewhere for that.

Be prepared to make your own ground leads.

I received my passive oscilloscope probe with 200MHz frequency as of May 29, 2026 for my handheld oscilloscope, I recommend buying this probe from this seller, it is made up of good quality materials, thanks seller and amazon!

As a person who has used all manner of scope probes (Tek, HP, Agilent) for decades in a real engineering and repair environment, I can tell you that these are a pleasure to use and are well thought out. The tip hoods are unique in that they very lightly snap on which means they won’t fall off in the middle of a measurement or when the probe is clipped on and hanging…even the expensive ones don’t have snapping hoods and after a while lose the ability to hold on tightly. The tips under the hood are a little longer than most which is a good thing when the circuit point of interest is difficult to get to. The attenuation switches (X1-X10) are decisive which is often not the case with probes in this price range…..they don’t shift during gentle handling which is a big plus. The cables are soft enough that they are easy to maneuver on the bench….some probes use unusually stiff cabling and if you’ve ever had those you know what I mean. The hooks are the proper length and width to get under a component lead and the ground clips have a rubber hood covering most of it so as not to touch other areas of the circuitry. The rubber makes the ground clip a little more difficult to open but that also means it will grip tighter when released onto the chosen ground reference connection. The BNC female connector easily slides onto the scopes BNC male and locks nicely. They also come with 5 pairs of colored rings for probe ID which is nice in the event you buy 2 pairs for a 4 channel scope. We’ll worth the purchase price. My only negative, and it is very minor, but I’ve seen people overly whining about it, is, don’t bother trying to use the provided capacitance adjustment tool, it’s just too big for the job…instead, use a jewelers screwdriver (flat or phillips of the proper size) to make the overshoot/undershoot adjustment, and you’re done.