G0946

Nice product for the price works great.

Great product. Better than I was expecting because of the low cost. Almost fully assembled. Less than 10 minutes and it was joining boards. Arrived in just a couple of days. Completely satisfied.

Came early and was already set up out of the box. And work perfectly right out of the box. I couldn't be happier with this purchase.

It worked perfectly right out of the box. Didn’t have to do any tinkering or leveling or adjusting, it really was a plug and play.

If you're like me and would rather spend more time on completing projects as opposed to spending days making a brand new "precision" tool work accurately... Don't buy this. I would've returned it had I not already heavily modified pieces of it. CONS 1. As stated, the fence was both cupped and twisted, which I mostly fixed by sanding for multiple hours. The twisted corners aren't quite flat but close enough. 2. Getting both sides of the fence straight, flush and 90° to the tables is finicky due to sitting on two different adjustable arms. One for depth adjustment, allowing for bigger/smaller width boards. The other adjusts both height and angle. Which ideally should have separate means of adjustment. On top of that, both adjustable arms have a system where there is a single rail, which is off to one side. Neither of the rails/groves in the arms that accept the rails shit flush with one another. 3. The blades are poor quality. While testing the jointer using 1/32in passes on pine/fir, the boards began to bind within the first 10 passes out of the box. After adjusting the board and finally pulling it through I found that a knot had dulled 3 blades, not been cut, and that knot caused a deep scratch in the out feed table. PROS The finish on the first few tests were buttery.

Bought this bench top for small projects works well

Blades on last for 5 board edges. Wasn’t taking but small amounts also.

I have no problem with it so far, Just the fence is of alignment with table, but it does it job so far