Artec VH59A Vintage Tone Alnico 5 Humbucker Pickups Neck Bridge Guitar Pickups Set for LP SG Style Electric Guitar, Chrome

I installed these in a BCP 335 type that came with microphonic pickups (not bad clean but would howl under the slightest gain and feedback). I didn't want to spend a lot on pickups for such an inexpensive guitar (not a bad guitar at all after some fret work and a slight setup) and these were recommended to me on a guitar forum. Wow! First, the howling screech was gone from under a bit of gain compared to the stock pickups. They handle higher gain as well quite nicely (great hollow body feedback.....the good kind.) Wax potted and stay quiet. Second, I use SD 59s in the necks of most all of my guitars....and this is so close that you won't notice the difference after a bit of playing. Not a fair comparison, LP versus 335 will change the tone, but I know the pickup well enough to know what it sounds like. Not sure on the bridge compared to the SD (don't have one to A/B with), however, I'm sure that the comparison would be favorable. Third, four conductor wiring with a very nice split sound. Although I did not hardwire these to be split, I played around with them before deciding (clip leads are great for this). Very nice and comparable to the SDs. But I didn't want splits on this guitar so decided not to (I use the splits on my LPs a lot). Fourth, the pair is very balanced and complimentary. Adjust to taste and you will find that the neck and bridge work very well together. Fifth, the fit and finish are top notch. Easy drop in replacement pickups. All in all, I highly recommend considering these pickups if you are looking at replacing the pickups in an inexpensive guitar. $200-$300 on a set of SDs on a $100 guitar doesn't make much sense in most cases. However, these do sound great. To me, they are good enough that I ordered another set for an inexpensive LP type that will be used on stage in my bar band (along with the 335 knockoff).

Great lower output Alnico 5 humbucker. Bought the set at a price that was cheaper than a brand name single pickup, and they sound as good as more expensive versions. Used the bridge humbucker in a strat with Seymour Duncan single coils in the middle and neck, and this paired well. Has good clarity and bite, and complemented the existing single coils. Used the neck pickup in a Les Paul style guitar, and it does that blues-rock tone really well without sounding muddy or harsh. Fit and finish seemed on par with more expensive brands, and the metal covers look really good, not super cheap.

Bought these for a project SG and was very impressed with how these sounded! I backed a couple of the pole pieces out and can confirm they are indeed wax potted (you can see the wax in the threads). Dead quiet too, which was such a nice surprise I'm getting another gold set for a LP. Had a hell of a time pulling both sets of 4 conductor wire through a small control cavity hole and was happy to see that they both held together after the amount of force applied. While the construction seems better than adequate (I am not sure if these are "18% nickel steel covers blah blah") the tone was what really impressed. I have been tinkering with guitars for 40 years now, and favour single coils generally, but these sounded great clean or distorted, with a very nice pronounce growel in the low end and a singing, non-ice pick high end with great sustain that sounds as good or better than my Duncan 59/JB PRS setup. Not sure if they will go "death metal heavy" but I suspect those players will probably be looking at other options anyway. These do classic rock very well, including heavier stuff. I don't think you can do better when looking at budget sets. Hell, I hesitate to call them a "budget set", they are just a real nice set of pickups that I would not hesitate playing out or taking to the studio. Highly recommended.

My diagram had green as the hot and black as the ground. It was completely opposite. Once I mapped out the pickup correctly they sound fantastic. They are very close to any $200 PAF clone out there today.

Have a squire starcaster that I love and was making it one bridge humbucker and one volume. As much as I wanted a Seymour Duncan I didn’t feel like purchasing one and I looked around and heard this company makes good pickups for the price. As much as I love fast thrashing I wanted something with a lower output so I can experiment with it. It fit exactly into the bridge no problems there and the wiring instructions were straight forward and easy to read. To me the tone works amazing with cleans but it does great with overdrive and distortion. I can really push it and it hit the mark for me. It was my first time purchasing a pickup and doing all the soldering to a pot on my own. Usually take it to my guitar guy but I want to learn. Overall I love it and it sounds great, will update if anything changes.

I heard good things about these pickups, so I bought a set. Unfortunately, the pickups are not lefty friendly. If you are left handed, and considering these pickups, the wire lead on the bridge pickup is very short. The wires will not reach the controls. Don't understand why they would have short leads. You should just have normal length wires and let the installer cut them to fit. Since I'm returning the pickups, I cannot review how they sound. 3 stars

Looks great, long leads provided and the sound… well, threw it in the neck position of my Gibson SG, added coil split to it and honestly… I can’t tell the difference between pickups sounding three to four times the price. I’m a bit pickier with my bridge pickups because I play higher gain stuff, so honestly wouldn’t chance not putting one of the name brands there, but for the neck this sounds wonderful. Splits nicely also with balanced, clean chime. I would rather have this than an SD59’ for instance, which just sound like mud to me. Took a while to arrive, but I wasn’t in a hurry and worth the wait! Artec makes good stuff. Always have, but first time trying their pickups. Def will consider again for low risk or low budget projects again in the future!

A nice strong set of Humbuckers for the money. Artec makes reliable pickups. Pay attention to wire color code. They are not like Seymour Duncan. Here the green is the hot lead and not the black wire like everyone else's. Check the indo that comes with these pickups as those color codes can change..

オークションで最近落とした、安物のダブルカッタウェイタイプのギターをレスポールっぽい音にしたくて購入しましたが、いやー化けましたね。物凄く心地よい扱いやすい音のピックアップです。 昔持ってた中堅クラスのレスポールカスタムタイプのギターに似た音色が出たのでとても懐かしくなりました。 ただサイズが図面より大きく、収まらなかったのでボディのネックマウント箇所をヤスリを使って削る作業が発生しました。購入の際はサイズ気をつけた方が良いと思います。

cela sonne très bien, bonne qualités.

Awesome pickups! Put them in a les paul project guitar and they are world's better than the first cheap pair I threw in. These sound comparable in sound quality to the gibson pickups I have in other guitars. They are very balanced and dynamic sounding. I can get a nice clean sparkly sound up to a heavy distortion that stays clear and doesn't get muddy. Install was easy with Pre tinned wires too! Glad I gave them a try!

Fantastic pickups! Balanced and great tone. No way you'll get better at this price point Extremely pleased

Sweet and mean vintage tone for this new build.