The Blazer 6 inch oval, red LED stop/tail/turn light is perfect for RV, camper, boat or trailer use. This submersible trailer light is DOT compliant (FMVSS 108/CMVSS) across the USA and Canada. It includes a grommet and a industry standard 3-prong plug to connect power to the light. The life of a LED light far exceeds traditional incandescent lights and draws significantly less power than traditional bulbs. The polycarbonate lens and resin housing are sonic welded/sealed to prevent moisture and corrosion (submersible). The oval light will work in under 80" and over 80" trailers - with the appropriate additional lighting required in FMVSS 108 and CMVSS standards. Pig-tails only - no full wiring harness - this item is typically used to replace an existing oval light on a trailer. Instructions are included for quick and easy installation. Blazer LED 6 in. Oval Stop/Tail/ Turn Light & Park Light, C561RTM Product Features: Sonic-sealed housing and lens so it's fully submersible Comes with grommet for standard grommet mount installation/replacements Includes industry standard 3-prong plug to easily and securely connect light to wiring pig-tail Electronics are epoxy coated for a second layer of defense against moisture and corrosion Vertical, angled or horizontal mounting positions are standard with this style of STT light FMVSS108 and CMVSS compliant - legal to use across USA and Canada with additional lighting and reflectors that might be required for your specific trailer White LEDs show red through red lens Find the right light for your trailer or vehicle - Learn More - 800-835-0129 technical support 8am-5pm M-F central time Find the right light for your trailer or vehicle Learn More IINSTALLATION INSTRUCTIONS: 1. Disconnect vehicle battery 2. Use template on reverse side to cut opening in the mounting surface 3. Push rubber grommet into opening. Connect plug to light, feed wires through grommet and snap light into grommet 4. Attach the black wire to tail lamp circuit of the vehicle. Attach the red wire to the stop/turn circuit of the vehicle 5. A good ground (-) connection is necessary. Use a file or screwdriver blade to clean away/remove any rust or paint from the metal surface where the ground is mounted. Attach white wire to ground (-) 6. Reconnect vehicle battery
Trustpilot
1 day ago
1 month ago
