Brondell Bidet Toilet Seat, Non-Electric Swash Ecoseat, Fits Elongated Toilets, White - Dual Temperature, Dual Nozzle System - Bidet with Easy Installation

Make sure the t valves are 1/2 x 1/2 x 1/4 inch as the provided valves didn't fit the 1/2 inch pipes

Size & Shape: Elongated S102 seat inner hole opening diameter measures 11 inches front to back, and approximately 7.75 inches left to right at the widest part of the opening. The opening is egg-shaped. That's narrower in the front and wider at 3/4 the way to the back before rounding off. Edit 10/26/25 (MM/DD/YY): 5-6 years going strong. Both bidets are still going strong. About every other week, I use the quick-release mechanism and clean underneath. Still washing nozzles with a soapy paper towel each week. Very occasionally I spray them with bleach or hydrogen peroxide instead for a little more sanitation if I know I have been slacking in weekly cleanings especially for my family member's gross bathroom across the house. No growths on the nozzles themselves. The inside of the nozzle housing has grown a little bit of that pink bacteria, but it was easy to put some soap/safe sanitizer on a cotton swab and clean that all out. It was nothing extensive, for having never done it before for this many years. The yellowed hot water hose remains yellowed, and some of the gray seat bumpers underneath the seat have yellowed a little bit as well. I have not tried to treat them to remove yellowing. It seems the bumper's plastic is either aging from indirect sunlight from my window or from cleaner use over time. I do not have particularly hard water, but have also experienced no mineral buildups or changes in the bidet's water flow. I am lazy and I spray the whole seat with cleaner and just wipe up the excess where I can. I just stick some paper towels into the gaps where the cleaner seeps into, and use quick-release to unmount the seat to get underneath if necessary. Edit: 7/26/22 (MM/DD/YY) I liked it so much I purchased a second one on 7/8/21 for my other bathroom. The first one bought 1/4/20 is doing fine but the plastic hot water hose has started to yellow in color and the chrome(paint?) has started to look a little worn on the control dials. Through repeated cleaning with Lysol, I managed to accidentally rub off the Brondell logo, which has improved the look of the seat altogether. Nothing else but cosmetic changes to report. The second bidet came with the sticker used to indicate the markings on the control dial a little misplaced and peeled up on one side. Original Review: I've had it for about 9 months so far. Installation: The bidet wasn't exactly "hard" to install, it was more just my inexperience with plumbing and having to switch out copper supply pipes for flexible ones, checking for leaks, drilling a hole in my vanity to pass the hot water tube through and all that, but in the end the connections where the hot and cold tubes connect to the bidet itself, actually leaked. I had to put tons of plumbers tape to get them to stop leaking. The final time i taped it, when i tested the pressure, the connection shot out a little mist spray at my bathroom vanity cabinet and then hasn't leaked since. I am very careful about never touching the connections out of fear it would spring some sort of leak again. I ended up having to use the like "last resort" mounting holes in the seat bracket, because I needed my seat as far forward as possible to align with the edge of my toilet. The seat is actually really comfortably shaped, and doesn't cause nearly as much tingling or numbness in the legs as do standard toilet seats if you are sitting for a couple minutes. Use: I was worried about the water pressure because my home has somewhat inconsistent water pressure at times, but the pressure is strong--sometimes even too strong, but that's not entirely a bad thing considering the product was able to take this inconsistent water pressure and turn it into a strong jet. I found that I can actually purposefully get the pressure to be a little weaker, if upon activating the bidet spray, I turn the dial a little bit back towards "off" or "self clean" and the spray weakens for a bit instead of the nozzles immediately retracting. As much as i installed both a hot and cold water line, I end up preferring to have the mixer dial more towards cold, because that's not nearly as jarring as getting blasted with scalding water when someone opens a cold faucet elsewhere in the house, taking from your cold water supply. I do enjoy the unit and it does cut down on but does not eliminate toilet paper usage. (You've still got to wipe the water off yourself. I wouldn't trust using any reusable or "communal" towels for this purpose as you are only "hosed-down", not sanitized, and definitely still contain bathroom residue whether you like it or not.) Cleaning the unit: I wash the water jets with soap and water at least once weekly and I haven't had any issues with visible bacteria or mold growth. After gently pulling on the nozzles to expose them and soaping them down with a paper towel, I let them sit for a few minutes and then close the seat lid and run the self clean function on each nozzle to rinse the soap out. The self-clean kind of sprays in a mist and sometimes that water can spray out under the front of the seat, misting your bathroom floor. I've only used the quick release on the mounting bracket a few times to get a decent clean under the seat. You should want to check underneath here once in a while for "number one" splatter or old dehydrated liquid cleaner residue up underneath--between the seat and the mounting bracket, especially if you have males using the toilet, amplifying the amount of splatter you may have. I am very cautious when using the quick release function in fear of bumping the water connections. For standard seat maintenance I recommend spraying a paper towel with a mild cleaner and then wiping the seat and all of its outer casings to clean it, instead of spraying the seat directly--because the sprayed cleaner runs down the seat and seeps between the hardware and adds to the liquids that gather in crevices and underneath the mounting bracket. The indications for "front wash" and "back wash" are printed within a gel-like bubble-dome sticker that is applied to the circular face of the control dials. I would not spray this directly with cleaner as to discourage damage to the adhesive. I check the plastic mounting nuts underneath the back of the toilet for tightness once in a while if I notice the seat has any extra wobble to it (not often). My Complaints and Concerns: -I am uncertain of the longevity of the plastic tubing used for the hot water pipe. -I wasn't happy with the small leaks I experienced while connecting the hoses that came with the unit to the unit itself, thus having to use plumbers tape and hope it wouldn't spring a leak again. -Mildly annoyed that the self-clean function can spray mist underneath the front of the seat and onto the bathroom floor.

My husband has been nagging me to get a bidet since I bought him one years ago. I finally decided it was time and went to purchase the brand I bought him. Name brand; colloquialism for your backside. It was going to be around $250. Wasn’t really jazzed about that at the moment. I decided to do some brand comparisons and Brondell seemed to fare quite well. From what I gleaned the other brand spends a lot on marketing. So I went ahead and got this Brondell model. The whole “no tools needed” is not universal. I needed tools. In fact I needed my handyman because my valves are hard to get to. But even if exposed I think I’d need a wrench to get the parts tightly connected. However the set up IS very easy. It helped to watch an online video. The only reason I couldn’t do it was because of my particular situation. But I got pretty far before I had to stop and get help. So now it’s on my Toto toilet. Seat fits great and dare I say it’s more comfortable than my Toto toilet seat. It looks good. It’s not crazy bulky. The design is very smart. I have a tight space on both sides of the toilet and it fits perfectly. My husband’s bidet has a panel that is annoying to clean. This just has knobs so no issue there. I finally used it this morning. Wow. Wow. Wow. Just wow. Talk about clean. The angle of the jet is perfect. My husband’s bidet takes some adjustments or you get a blast of water on your back. It’s kinda like The Wizard of Oz where everything is black and white but then changes to color. My eyes are open to the joy of the bidet. I feel so clean. I’m getting another one for the guest bathroom.

I know this is highly personal. At one time I was 485 pounds that being said with being at that weight, I was having an extremely hard time with hygiene. I started losing weight in 2016. I went to a friend’s house this past fall. I usually don’t like using other people’s bathrooms. When I went into their bathroom they had a bidet toilet seat. I used it it was amazed! I asked them why they got a day and it revolved around Covid because the toilet paper shortage. I bought my two cause I have two bathrooms normally I would use dude wipes that box from Sam’s Club would cost about $19 and will last about 2 1/2 months if that. I cannot tell you how much more clean I feel. So much that I have cousins that are older. I told them about it and they bought two and they are extremely happy. Now for people with health issues, not just wait but perhaps autoimmune disease cancers what not. I just wish doctors would talk to their patients about the importance of hygiene and recommend something as a bidet toilet seat. It doesn’t take much. I have seen others that are cheaper and my cousins bought one that are cheaper. The fact that it’s better hygiene and better health overall because people with autoimmune diseases and other illnesses, it’s much healthier in my opinion. I just wish doctors would talk to their patients and be honest with them. If

I have to admit to being unaware that it was possible to get a warm water bidet without an electrical outlet available. I bought this one the day I learned those were a thing. I've always run the sink tap a bit when I first go into the bathroom because I like to wash my hands with hot water. I still do that, which makes the hot water available for the bidet as well. I've tried the seat with warm water as well as just cold and the cold is tolerable but the warm is a very pleasant experience. This seat is easy to remove for cleaning as long as you remember to position the hoses to give you enough slack to put the seat beside the toilet while cleaning. The experience of using a bidet is life changing in my opinion. Not only are you left feeling cleaner than when using toilet paper, but you also have no harsh wiping which can leave things a little sensitive. I still use toilet paper, but it's just a few squares to pat myself dry. My adult son and I share a bathroom and a single roll easily lasts us about a week. I withheld one star because I wish the seat itself were more solid feeling. It's a bit plastic feeling and flexes quite a bit when you sit.

This toilet seat was my entry way into a bidet. Let's just say it converted me. Running a hot water line was too complicated, so I just ran the cold water line. I have bad neck, so it took me a little longer, and I had more pain. For some, the install should be super easy - for others it may be more complicated. I highly recommend this bidet, and it is better than the cheap/less expensive versions.