Low Profile Slim Gun Belt Clip - IWB Minimalist Concealed Carry Stealth Holster

Great fit pretty easy to install

Great clip! Works well!

This does not fit a p365 as advertised. For one, the clip is an absolute joke, it will completely ruin the finish on your slide and by the time you’ve finally attached it there is absolutely no retention and it can’t be trusted to secure the firearm. Beyond that this is potentially dangerous. While it may have been mine that was out of spec, the backplate actually extended too far into the slide and prevented reassembly and wouldn’t allow the drop safety to pop back into place! Do yourself a favor and get literally anything else. You’re better off using duct tape than this junk to safely carry your p365.

Ok so I’m changing my rating for this from 1 to 4 Here’s the issue. The screws they gave with the kit are too short to hold the clip on and the grip. It was catching like one thread and stripping. 1. If you have thinner grips it might work. 2. If you use regular 1911 grip screws they are long enough but you have to file them down because they are too long and drag on the magazine. I installed them and then hit them inside the mag well with a dremel tool and sandpaper drum. I was going to give this a 1 until I used the clip. Once you sort out hardware issues the clip is fantastic!!! This was totally worth the BS with the screws. So despite my experience I have to say, You should buy this clip 100% and figure it out. It’s worth it in the end. If you have extra 1911 grip screws laying around and a file you should be good.

Excellent clip for my .40 cal g3c. Installed for right had wearing iwb. Gotta be careful using this because there's nothing covering your trigger! This makes my gun more comfortable to wear than any of my holsters. Also this will minimize printing to the lowest possible amount.

I've had those clip for about 2 years now its broken in pretty well at this point so its not the tightest like when I first bought it but it functions very well an has withstood the abuse of EDC and never caused any problems or interference at the range

The alignment is good the holes line up but the screws that came with it were not long enough to mount with the factory grip plate

I carry everywhere and it does such a good job of retaining to whatever it's clipped too. I wear joggers to take the dog out and as long as the waistline isn't blown out from my tactical muffin top I can usually get a good grip and keep it at a drawable position. I just wear an everyday military style clench belt and it's always ready to go. Best 18$ attachment Ive ever bought for my pistol. Will buy more in different styles and for friends as gifts, thanks