Ibergrif Water Filter Tap, Drinking Water tap, Reverse Osmosis Faucet | Single Lever, 360° Swivel, with 2 Tap Adapter, Silver M22301A

This was better than I expected. Quality is really nice. Super easy to install with push fit fittings. Looks much nicer than the tap replaced

Straightforward to set up and the fittings are good quality. The water tastes much fresher right away, and the kit feels solid and reliable. Great value for a complete filter system

So so quality and had to use some washers from the old tap to secure it firmly to sink. The ones provided seemed too small to spread the weight and stop excessive wobble. But with that aside it's cheap and works perfectly with no leaks so cant complain.

Looks good works well

Lovely tap, well made and looks great. It had a different bottom screw type to our old tap. This was a lot bigger and lead to the 10 minute job of swapping them out, becoming a lot more involved needing to make adaptions to cabinet below and pull sink out of place to make indents into worktop. However, due to this it is much more secure than the tap put in by the water filtration company upon installation. Well worth the hassle we had when installing it in our space.

I purchased this tap as a replacement for an existing filtered water tap that had failed. The tap being replaced was purchased from our water softener installer and self installed, it was more expensive than this one. Due to the cost of this tap I wasn’t expecting the world. However….. This tap was delivered and I could not have been more pleasantly surprised. The build quality is superb, the finish of the metal work is a satin brushed stainless steel, and it is significantly more robust and just feels like it will last longer than its predecessor. It is also supplied with push fit adapters to fit various feed piper diameters. Aside from the build quality and supplied fittings, the packaging is excellent. The branded box contained a fabric bag that contains the tap itself, this I presume was done to ensure that tap arrived scratches free and looking exactly as the pictures portray. I don’t usually write reviews, let alone to this length or detail, however I genuinely feel that the vendor has got this spot on, Whilst I don’t want them to put the price up, it would have easily justified extra cost, especially compared to its predecessor. It included all the relevant fittings making installation a breeze, and whilst it’s only been installed a couple of weeks I have every confidence it will last. Highly recommended if you are looking for a drop in replacement for a drinking water bypass for a softened water system.

Came well packaged, with a printed installation guide. The way I’ve positioned it (see photo), with the lever on the left, you push it away from you to turn it on, so if you want to pull it towards you, which is probably more natural, you need to twist the whole tap 180deg to put the lever on the right. The thumb-turn fixing was much easier than the nut on the tap I was replacing (which was very awkward to get to with a spanner). I couldn’t tighten it up enough from underneath, but I instead twisted the tap itself the last ¾ of a clockwise turn, while the thumb-turn gripped by itself underneath. The push-fit connector supplied was also much easier than the compression joint on the old tap (another spanner job!). Contrary to the description, it does not incorporate reverse osmosis filtering, as it is just a tap. It is also described as having both a ball valve and a ceramic disk, but it feels just like a ceramic disk to me. Mine has a much longer tail than shown (see my photo), so is probably an improved model and could easily fit a 25mm worktop — compare some other reviews. And one photo in the listing shows water coming out when the lever is upright, but this is not true to life: the up position is off.

Not a bad filter tap. The neck feels a bit flimsy and that's all that's holding it back from 5*. It is actually quite good for the money. No leaks on initial installation. Tool-free fitting which I was grateful for, as it's not an easy position to access.

Commandé la veille dans l'après-midi livré le matin dans la boîte aux lettres. Très facile à installer fourni avec tous les embouts nécessaires métal brossé du plus bel effet esthétique.

Bad

Compré este Ibergrif M22301A para sustituir el grifo que venía con mi equipo de ósmosis inversa, porque el de serie era de plástico y además no pegaba nada con el diseño de mi cocina. Y ha sido un acierto total. Lo mejor es que el grifo es de acero inoxidable y el acabado queda mucho más “de cocina de verdad”: se ve sólido, no da sensación barata y, sobre todo, coincide con el diseño de mi grifo normal, así que estéticamente queda perfecto. Para mí esto era importante, porque tener dos grifos distintos y uno de plástico canta muchísimo. En cuanto a funcionamiento, abre y cierra bien, el giro es cómodo y el chorro sale correcto para agua potable. Una vez instalado, no he tenido fugas ni problemas, y se nota una mejora clara respecto al grifito básico que suelen incluir muchos equipos. La instalación fue la típica de estos grifos: colocar, apretar y conectar el tubo, sin complicaciones si tienes lo básico. Y ya solo por quitarte el grifo de plástico y poner uno con buen acabado, merece la pena. Resumen: muy recomendable si tienes ósmosis y quieres un grifo más bonito, más resistente y que combine con el grifo principal. En mi caso, ha mejorado mucho la estética y la sensación de calidad.

Ottimo prodotto,facile da montare...

Alles Bestens