3M VHB Tape 5952 Double-Sided Acrylic Foam Tape, Black, 1 in x 36 yd

I bought this particular tape for a few reasons. #1, Made In the USA. #2 Made by a long time company with a trusted name. #3, size, (width and thickness).I used it to bond a convertible top section to a flap of material that allows the top to rise up when at highway speeds, but not let it stretch beyond its limits. I bonded first to the top fabric itself and used a high end heat gun on a very low setting so as to not damage the top. I weighted the top down on the outside to assist in the bonding.Next came the time to bond the flap of material to the top itself. This flap is bonded to a 'bow', that give the top its shape while in the up position. Slowly removing the protective film, I worked the material flap to the tape and again, applied light heat and some weight and let it sit for a few days. The suggested curing time is 72 hours. Follow it for best results. Also make sure both sections to be bonded are clean and free of oils, previous bonding materials, if any and wiped down with Isopropal alcohol. Today, I took a 20 mile trip with speeds between 70 and 80 mph. The top rose up like it should and never broke the bond along the entire 32" run of tape. Not having this bond in place stretches the top material and gives it a worn look when at rest until it tightens itself back up.So far, I'm very happy with the results of which I didn't really expect. This saves me a few hundred dollars in a top repair and took very little time to complete. Another great 3M product!

This tape is FANTASTIC... I just wish I could have found the 3/4 inch tape before starting my trailer project... Instead, I used 1/4 inch wide and it's not doing what I have hoped it would... The 3/4 inch wide tape is holding very good...

Worked great! Used in conjunction with the 3M primer to ensure a proper bond. Used the tape to adhere unistrut to the roof of my camper to install solar panels without having to drill into the roof. They’re not coming off anytime soon. Great bond, one time shoot to get it right.

First, be aware that it absolutely will not stick to everything. If your car dashboard has been spritzed with Armorall to make it slick and shiny, you can forget sticking pretty much anything to it, this adhesive foam tape included. I'm noting this because I've seen folks gripe about buying a stick-on phone mount and then discovering that it wouldn't stay put on their lovingly hand-detailed dashboard covered with Armorall or similar products. That said, on most smooth, non-porous materials, this tape is going to bond well enough that you'll risking damaging something when you try to remove it. So, be *really sure* that you've got it where you want it before pressing it in place; you most likely won't get two shots.

I have used this to stick a dashcam to my windshield. It has held fast even under the extreme heat from direct sunlight and a closed car.

Worked great to hold down a piece of trim on my truck that fell off!

Very strong tape, worked for what I needed

Works great

ماهي جيدة

Sticks reallyyyy well

Amazing product, It is easy to use and very strong.

Pega muy bien

Seems to be legit 3M tape. Expensive but it will hold up anything. I've used it in cold weather and its noticeably less effective around 5C. Warming the parts and tape with a heat gun helps a lot but I wouldn't trust it to hold up much. Forget using it in subzero temperatures even with the heat gun.