mr16 7w led

I own a scenery shop. My client found some Art Deco columns online and they were really flimsy cardboard construction. Unacceptable for the classy event we had planned so I took the parts, changed it a bit and built a wooden inside frame for them with a metallic top section. I used these ALDI MR16 lamps for uplights since I could aim them and they were small enough to fit inside the part that holds the top decoration. I used a 12v power supply and ceramic GU5.3 bases to hold 3 of these in each scenic piece. The light output was great with no appreciable heat like incandescent lamps would have been. The warm color temperature complimented the top section which we updated to a gold Mylar pebbled look.

These bulbs are pretty good. The color is correct at 4000K, brightness is appropriate for a 7w LED, and the pins are the correct size for good contact. There’s a lot of these bulbs in the world that have pins that are too thin, and they are difficult to work with in many fixtures. These are good, they make contact immediately and are stable when lit for hours, not flickering on and off like the cheap ones.

Very bright and good quality!

The bulbs fit the outlets as advertised and were bright as advertised. However, every single bulb burned out after only 3 months of use. The bulbs were turned on about 5 hours each night. The seller graciously contacted me based on my review and told me I had received a bad batch of bulbs. He graciously offered to replace the bulbs even though I was outside of the return window. He suggested I use a slightly lower wattage bulb (5 watts) since I was using the bulbs in an enclosed outdoor receptacle. The replacement bulbs arrived quickly, are equally as bright, and are working well after several weeks of continuous use.

Purchased these as replacements. They appear to be well made and I really like the warm color. I like them well enough that I ordered another box for reserve. Hopefully they will last a while.

I needed to replace my two front halogen docking lights on my boat, these did the trick and are much brighter. I read other reviews that complained some of their LED's did not work, so I ordered the six-pack even though I only needed two. The two I installed work perfectly, I did not test the remaining four. My docking lights are completely enclosed behind water tight lenses on the bow of the boat. I'm not concerned with heat build-up since I'll be lucky to use the lights once or twice a season for less than 15 minutes at a time. Besides, they are replacing halogen bulbs, which generate a lot of heat to begin with. A couple things I really like about the LED lights is how bright and pure they are with much less power consumed. These LED's also measured exactly the same as the halogens I replaced, which they needed to because they are held in with a metal shroud and two springs. I relied on the seller's measurements and it was very accurate, thankfully. My only word of caution is to be aware that they are described as "Non-Dimmable", so if your application requires dimming, these lights are not for you.

These bulbs (I have the red version) work. They claim to not be dimmable, but I get reasonable dimming with a high frequency 12V PWM dimmer, though I usually use them in on/off mode. They’re way better than a white bulb with a red color filter.

I have purchased these light multiple times and I find they do not last anywhere near the 30,000 hrs they state in the ad. Statistically, based on my small product sample, I find they last about 1/10 of that amount. I have emailed the company for a response but have not received anything.

they are bright have the warm look thanks

Muy buen producto, lo recomiendo