Key Fob Keyless Entry Remote fits Toyota Tacoma Tundra Sienna Sequoia Highlander (GQ43VT20T), Set of 2

Works well. Good product. No problem programming to my Toyota.

Fulfilled and shipped onshore by Amazon (got here in a couple of days). Followed instructions (best to read through a couple of times, you can find a video on youtube). Programmed my 2012 Toyota Tacoma flawlessly. Look and feel identical to factory originals. Couldn't be happier. Caveat: you need to go to their web site (www .remotesremotes. com), look up for your vehicle, print out, etc. Toyota made sure you could not enter programming mode accidentally; the instructions seem inane, you will think you need to dance in a circle, flap your wings, etc., but just follow the directions, and everything will work out). Instructions provided were a piece of paper directing me to the web site. Couldn't be happier. Another reviewer posted the instructions, but here they are again: 1. Begin with the key out of the ignition. 2. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk. 3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE. - insert, pull out - insert, pull out 4. CLOSE then OPEN the DRIVER's side door TWICE. - close, open - close, open 5. Insert key INTO the ignition then REMOVE it. - insert, pull out 6. CLOSE then OPEN the DRIVER's side door TWICE. - close, open - close, open 7. Insert the key INTO the ignition and LEAVE it in ignition. - insert 8. CLOSE the DRIVER's side door. - close 9. Switch the ignition to ON then OFF. - turn key to on - turn key off 10. REMOVE the key from ignition. - pull key out 11. The door locks will now cycle to confirm the vehicle has successfully entered programming mode. - door will lock, then unlock 12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds. - lock & unlock, together, 1.5s - lock, 2s - lock should cycle 13. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 12 if you have no additional remotes proceed to step 14. 14. OPEN the DRIVER'S side door. Programming is now complete.

Works for a day 🤷‍♂️

1. Some vehicles are dealer program only and this procedure will not work. 2. Begin with the key out of the ignition. 3. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk. 4. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE. 5. CLOSE then OPEN the DRIVER's side door TWICE. 6. Insert key INTO the ignition then REMOVE it. 7. CLOSE then OPEN the DRIVER's side door TWICE. 8. Insert the key INTO the ignition and LEAVE it in ignition. 9. CLOSE the DRIVER's side door. 10. Switch the ignition to ON then OFF. 11. REMOVE the key from ignition. 12. The door locks will now cycle to confirm the vehicle has successfully entered programming mode. 13. PUSH and HOLD the LOCK and UNLOCK button for 2 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds. 14. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 13 if you have no additional remotes proceed to step 15. 15. OPEN the DRIVER'S side door. Programming is now complete

While they work well once set up, the problem there is no written directions, we are directed to a web-site. While at the web site I was unable to program the key fobs. I left that website and googled program key fob. I was able to program all 4 key fobs in a matter of minutes. That is why I gave a 4 star rating, otherwise I would have given a 5 star rating. Good value for the money, I recommend and would buy again.

I have to be honest when I first order this thing I was tentative to think it was going to work after all programming these things can be a bit tricky. I received it and honestly it took me two days to work up the nerve to try to connect it just because I was worried I'd be disappointed. Lo and behold the thing worked first try!!! I am so thankful and so excited that it worked what a great product thank you so much for inviting an affordable alternative that isn't outrageously priced this thing works perfectly if you take the time to learn how to program it it's not difficult at all and we'll save you loads of money at the dealer don't forget to unplug and plug back in the white controller/receiver box directly above your glove box if you have 2005-2010/11 Tacoma because it resets the receiver box in case it is stuck in valet mode sometimes that can happen. This is a real review not fake this thing work and save me hundreds of dollars I'm so happy and pleased with the product itself it looks just like my original clicker feels like it and works like a brand new one I couldn't say enough good things about this even if I tried after having my truck sitting unlock for 2 to 3 days notice someone would try to steal what's inside I'm relieved I can finally sleep at peace at night knowing my truck is locked and everything inside it is safe thank you again if you're on the fence and read this review buy one of these I assure you it will work just pay attention to the instructions and you're golden.

Worked great for about a year each. Both fobs stopped unlocking the door, I opened the fob to replace the battery and a few small pieces fell out, it was the retainer ring to the unlock button. Happened on both after about a year.

Uno de los dispositivos no le funciona de manera normal el botón de desbloqueo, detalles que se pudo notar hasta que fué programado.

Excellent 🤘 it may seem it doesn't work at first, but after your initial reprogramming to your tacoma. To unlock, one press u locks drivers door only, second push of the button unlocks all the doors, even the alarm safety will work 👍

Uno NO funcionó !!

So I have to say, I’m super happy this worked! However, I did run into a couple hiccups. My car wouldn’t enter the programming mode. I tried 2 different methods, remoteremote.com and keylessentryremotefob.com. I chatted with someone on remoteremote.com help chat and they were SUPER HELPFUL. She ran me through a couple troubleshooting options. I ended up disconnecting my battery for 20 minutes to reset the system and then I tried remotes method and it didn’t work, but I tried the keylessentryfob way and it worked! Both remotes programmed successfully!!

Initially the fob worked fine, but less than a year the unlock button stopped working. The button key broke and inner button module lost its spring. Looking at this versus my old OEM the quality is far less, from the keys to the modules on the electronic panel.