TRYMAG 50Pcs Strong Neodymium Magnets, 15x2mm Small Refrigerator Magnet

I picked up this 60-piece pack of TRYMAG Strong Rare Earth Magnets to use for latch mechanisms, modular component connectors, and removable panels on my 3D printing projects. Having previously tested various budget craft brands, I was specifically looking to see if these could maintain tight dimensional tolerances and a high-quality surface finish. They completely met my expectations. Why these magnets are a solid addition to a maker's hardware kit: Vibrant and Tough Nickel Coating: The triple-layer Ni+Cu+Ni coating on these discs is exceptionally clean and smooth. Budget magnets often arrive with minor chips or a flaky finish that compromises the surface contact, but these rolls are flawlessly plated, allowing mating 3D printed parts to sit completely flush against one another. Dependable Structural Pull: For their compact size, the magnetic force is highly impressive. They click together sharply and offer plenty of structural holding power to secure heavy printed enclosure doors, tool panels, or modular hobby displays without letting go under vibration. Uniform Sizing: I checked several of these randomly with a digital caliper, and they are highly uniform in both diameter and thickness. This consistency is absolutely critical when you are designing press-fit pockets in CAD, as a variance of even 0.1mm can result in cracked plastic layer lines or loose magnets that fall out. Makerspace & Engineering Tips: Perfect CAD Tolerances: When designing a socket or recess to hold these for a pure press-fit, aim to model your hole diameter roughly 0.1mm larger than the magnet's physical size. This provides just enough clearance to press them home securely using the flat side of a pair of pliers without splitting your printed walls. Securing with Adhesives: If your model has a bit of loose play, opt for a thick Cyanoacrylate (Super Glue) or a quick-cure 2-part epoxy. As a rule of thumb, avoid using a hot glue gun anywhere near neodymium material, as the high heat can instantly and permanently degrade the magnetic alignment fields. Check Your Polarization: Before permanently gluing matching pairs into your 3D assemblies, mark one side of the magnet stack with a marker. This ensures you don't accidentally embed a disc backward and end up with joints that actively repel each other. In the end, this TRYMAG set provides a fantastic balance of high-grade pull strength, dependable manufacturing tolerances, and pristine plating. They interact beautifully with rigid plastics and heat-set inserts, making them an excellent choice for any engineering or modeling workbench.

I love the size and quality of these magnets. I have purchased several other brands and these are by far superior to others! They have an amazing hold capacity! They came in a case for storage and in perfect condition. I definitely recommend these and will be reordering more as needed. It’s a great value for the price. Don’t waste your money on less expensive ones! 5 stars!

God price for the money, but keep in mind these are low "power" magnets.

These magnets are very strong. Keep them separated when you’re applying them because they’re powerful and will be attracted to each other while you’re working on your project. I was impressed with the quick delivery and the thoughtful packaging of this product. I will buy them again when I need more.

I needed some magnets to glue onto the backs of refrigerator-mounted spice canisters (which had come with their own magnet backs, but which were too weak to stick). These worked pretty well. They are not the strongest magnets around, but they were good for my use case. Superglue/Krazy glue seems to adhere quite well to the magnets, and putting 2 on the back of each cannister was enough to firmly plant them on the side of my fridge. My only complaint is that they're a little fragile... the magnets can break themselves if allowed to snap/join other magnets, so you have to handle them carefully.

Great for lightweight items. Small so not much power.

These magnets work very well for my crafting needs! Strong hold for being so small!

I've bought 370 of these magnets and have used over 300 of them. The ones from my first order (50pcs) were great; very strong, size within spec and great finish. So I ordered 200 more. Of those, 100 were great, but the other 100 were weak, undersized, had finish issues and you could tell some were chipped before being coated. I'm embedding these in 3d prints and need them to be strong and pretty true to size, so the 100 bad ones were unusable for me. I was disappointed with that order and planned to find another seller, but ended up needing more magnets quickly and these were the only that would be delivered in time. I ordered the 120pcs set and thankfully these were acceptable...but still not great. The finish and size were good and they were decently strong, but not as strong as that first order. In the end I'm not sure if I'll by these again. The black coated ones are less common (compared to silver/nickel) and there aren't nearly as many choices of sellers for them.

They’re smaller than what I first thought but that’s good, I didn’t want them to be so big. They’re VERY magnetic, hard to pull the magnets apart so that shows how good they are.

I purchased these magnets to use in making some Rock Art fridge magnets and was quite pleased with the amount of weight that these little magnets can hold. They came packed together as 3 units of 20 magnets each. Upon trying to separate them, they kept wanting to snap back together with a pretty intense force. I managed to slide a single magnet away from the one stack as trying to pry it apart is futile. Putting the single magnet on the fridge also proved impossible in trying to pry it off with your finger. I had to grab the remaining stack and pull it off that way. They are brittle, due to the manufacturing process and had one break as I laid it on the table to see how far it would take for the stack of magnets to grab it. Within about 5 inches, the single magnet flew onto the stack with such force, that it snapped in half. That said, use caution handling these magnets as they can cause injury to your fingers if you're not careful. It's also wise not to put these anywhere near electronic devices such as cell phones, watches, tablets, laptops or monitors as the power that these things pack can cause damage to the device. If your looking for a strong little magnet, these are pretty good in my opinion and I would certainly purchase these ones again should the need arise.

抜群に いいです。

They work

Don't know what happened, but in the past the magnets were consistently 3mm, the last batches I received were a mix of 2.5mm and 3mm, as if one wouldn't notice the difference.