Stained Glass Frosted Window Film Privacy Static Cling Anti UV 17.5x78.7in

Very easy to put up and looks great. The hardest part is trying to cut straight

It’s a great product sticks great! At first, I could not get them to stick and was going crazy, but then I discovered that it had a very thin transparent film on the back that you cannot see and you wouldn’t know its there because you can’t see it. They did not give any information about it or instructions .… so once I peeled that thin film off, it’s stuck on like glue. Also, from the outside you cannot see in and from the inside, you can look in between the clear lines and see everything and it lets in light great product!! 🙂

Installation was a breeze & looks awesome, privacy for my office, check!!

Awesome product Still allows some light though and allows you to be able to see through to your yard. It does take a little bit of patience to install since you have to measure and cut but it’s well worth it. I’ve purchased other films and they’re too thin and just ball up but this goes on with ease and has great adhesion Highly recommend

The film is actually more of a vinyl cling - it's flexible, fairly heavy duty, and super easy to apply. That said, we did NOT completely follow the package directions. First, we measured the windows and cut the film to size using an L-square and household scissors. If your scissors are sharp, then you can just power cut right thru it. We did clean the windows. Next we sponged on a solution of Dawn dish soap and warm water - one squirt into about 2 cups water. The most difficult part was separating the backing from the film. We peeled back about 12" - 15", aligned it with the top corner of the door, and squeegeed it on - easy peasy! We just kept unrolling the film and squeegeeing it in place. We did two framed French doors with one roll. * * * * The instructions recommend using a spray bottle; a sponge is more controlled and didn't drip all over the place. The instructions also state to cut the film 1" larger and then use a sharp blade to cut the film after applying. No way! I use sharp blades and don't want cut glass or wood! We made sure our measurements were correct, then cut to fit. * * * * * We didn't need to, but I think it would be easy to pull off and reapply if necessary. All told, two french doors took just under an hour start to complete.

Very nice, looks great on my storm door glass. Sparkling too! Will be buying more.

I bought this for an entry door that had a long glass inlay and was covered with a mini blind. Due to constant opening and closing of the door the mini blind was getting damaged and dirty. I decided to remove the mini blind and use this to cover the glass. I was concerned about privacy and the ability for people passing by to see through the door at night when the lights were on inside. It turned out not to be an issue. It lets light in from outside during the day but doesn’t allow any visual peeping from outside at night. And it looks really good.

Perfect. You need to take your time and do it carefully.

Utilisation pour fenêtre salle de bain.

Works well to conceal site lines, but has some minor imperfections on the installation at the sides, although you have to look closely to see it. All in all serves its purpose well and having installed it on a few windows, I've learned a few tricks to improve installation.

Un poco complicado de instalar si no tienes experiencia.

Not good