BLUETTI EB3A Portable Power Station, 268Wh Solar Generator LiFePO4 Battery Backup w/ 2 600W (1200W Surge) AC Outlets, Recharge from 0-80% in 30 Min., LFP Backup for Outdoor Camping, Trip, Power Outage

I've only had this for a few days now but I like it, really nice display, charges fast and lasts quite a while depending on what you're running with it.. and I was happy to see that I got a solar cable with it.. getting that cable juging from the reviews I've read was kinda hit and miss.. but I bought a third party set of solar panels with it and they'll work with it.. My dad who can be an ignorant old man that thinks it's impossible for the power to go out or food run out even liked it.. Me personally I have off grid solar, wind , hydro and generator but this is nice to have in the car with a get home bag or if the grid really goes I can give to my parents to use, hence that's why I bought the solar panels, for them... Again, it's a nice looking unit, light weight, has the best battery and seems really versitile.. the only bad thing I can say about it is the battery of 268 watt hours isn't all that big, I'm sure it'll run led lights all night long but it's not going to run your house. The 600 watt limit is full tilt and may give you a half hour run time which is really good for a small unit like this but be real and have realistic expectations, understand that this is a supplement power source and will not perform and power the things a gas generator or a large solar system will.. but for what it is it's a very impressive power supply that can get you through a short term power outage and can be easily transported.. or to have power out in the middle of nowhere camping or hiking or what have you.. Definitely worth what I paid for it and with a lifepo4 battery should last a long, long time.. 2500 cycles and still carry 80% of it's original rating can not be beat.. there are bigger power supplies but with more capacity comes more weight and room needed... For me and my wants this little thing is perfect..

Not a big camper, off the grid enthusiasts, solar genius or engineer… just a person who doesn’t love gas generators & loves being prepared:) Did LOTS of research on portable power stations, this one has so much value for the price & hasn’t disappointed. We have purchased 2 other brands as gifts for family members (prior to finding this one) 1 of these as a gift & 1 of these for ourselves. We do have a large gas generator for extreme power outages bc we have a well & need the extra power in order to have water available, but this one is great for normal 4-6 hour Midwest outages or for longer ones if u r on city water. Pros: -The fast charge is AMAZING! It does get a little loud from the fan but who cares, all the other brand units take like 6+ hours to charge, this one is approx 1 HOUR!! In a power outage situation that is game changing, I can recharge in my car (car charger sold separately) & be up & running in no time. - the price is great, especially on sale - the batteries have 2500+ recharges, most power stations in this range are only 500-800 - the app (use this to completely turn off unit when not in use so battery stays charged, I read reviews saying it wouldn’t stay charged & im sure it’s bc they didn’t actually turn it off. - ability to run/charge so many things at once (see below for specs on items we’ve used it for) - wireless phone charger (DC charging must b turned on for this to work… lots of reviews said it didn’t work & im sure that’s y) - comes with solar charging cables - lifepo4 battery (doesn’t get hot, reducing fire risk) - can use while charging (a must for solar charging) Cons: - the AC charger is in the packaging underneath the unit, like hiding in the styrofoam. I read lots of reviews that said it didn’t come with one & that’s where it is. - had to buy car charger separate. Things we used it for: -charging phones, laptops, iPads, ryobi 18v batteries, rechargeable AA & AAA batteries, portable power bank -running usb fans, led lamps (AC & USB), tv, mini fridge, 300w heater, electric blanket (both ac & dc), large ryobi fan, inflating aerobed (0% battery used to blow up Queen sz) Things it won’t run: - basically anything over 600w, even though it says 600w, the battery drains fast using 600w. So our 300w heater will run for 1.3 hours. But our 5w lamp will run for 50 hours. It will not run our full sz fridge but ran our mini fridge just fine for many hours. I tried our keurig mini, shut off, but I need to research the “power lift” option in the app more bc I think it will run that. (7/10 update: keurig mini is 1500W so it will not run that type of coffee maker) I did research though, u can easily get coffee makers that will work w/o power lift & 12v coolers to keep ur stuff cold for days that are not much $$, in case u need this for longer periods of time. You can also get a car cigarette lighter electric blanket that will work much longer than the AC plug in kind, basically anything that is DC will run longer than AC powered items. All in all, very happy with this unit. Knowing what u can use it for and what you can’t use it for before buying is important I think. Hopefully my review helps you with that:) 4/9/23: update, I purchased a 60w Blavor solar panel for charging (didn’t want to spend hundreds of $$ on a big panel) At 46-48wh I was able to charge my EB3A from 69% to 100% in less than 2 hours. I did not require the Solar adapter BLUETTI provided, the panel came with a direct cord & adapter for the DC input. I’m very pleased with these results :) 11/17 update: unit still works great. Used it for off grid cabin, trunk or treat decorations & we’ve loaned to family/friends for power outages. It did run a full apartment size fridge for about 4.5 hours with normal door opening. 8/27/25: still works great!

The EB3A is a handy little machine with plenty of output power! 4.5/5 almost perfect but down .5 the buzzing fan sounds, even on silent charge mode. First let me start by saying that overall this is a great little machine. I admit I may have not bought this at the $299 retail price, but on sale is is most certainly worth it. I wanted a solar generator that had a greater than 300 watt inverter, LiFePo4 batteries, and in a small package. Most importantly be able to power the battery charger for my Stihl electric chainsaw, which draws 300-400 watts. If it could brew a coffee, that would be icing on the cake, but not expected. I did all those things with no issues. It powered the chainsaw charger at 400 watts. It ran my 1200 watt coffee maker at 315 watts using power lift mode taking 5 minutes to brew a cup. 21% of the battery was used brewing that cup. Others have done it more efficiently using different means of heating the water like a 600 watt kettle. I was just testing what I had on hand to make coffee. I didn’t test faster charging as I don’t see the need to put the batteries under that strain. If anything I prefer using the lower speed “silent” option. Which isn’t exactly silent. Some places online say the EB3A will do it silently, but even in the app it states that it will slow the fan and only reduce the noise. Nothing about eliminating it completely. In silent mode the fan will come on occasionally, depending on external temperatures. You can hear the fan controller buzzing noticeably as it slowly ramps up the speed to the fan. It’s not horrible, but certainly not “silent” either. I did reach out to Bluetti about this and they said it is normal. My hope is that they will be able to reduce this via a firmware update. I’d rather have the fan reach its set speed more rapidly, than have to listen to it struggle to move at the lower speed settings as it is ramps up. Still better than the fan being off or full speed only though! The power output meters seem to work reliably for as far as I can tell. Deviations were no more than a few watts from my Kill-A-Watt meter plugged into the grid vs plugged into the battery for the few items I tested. Not counting the coffee maker obviously. For example a 52 watt incandescent bulb registered as 52 watts on grid @ 120 volts using the meter. With the same bulb connected the meter registered 50 watts on the EB3A @ 120 volts, while EB3A registered 56 watts on it’s display. The USB readouts seemed to line up pretty nicely as well. A 4.4 watt load on my USB current meter showed up as 4 watts on the EB3A, a 10 watt load on the USB current meter showed up as 10 watts on the EB3A. There is also some parasitic load if you leave either of the power outputs on, but it does not register on the display. This would be the case if you left any inverter powered on, and not unique to this device. I have also found if you leave the app connected, the processor stays awake, and consumes some battery power. Best to power off from the app or close the app so it will go to sleep sooner. I was wondering why my EB3A was warm when unused at times, and I found the app was still connected each time that occurred. FYI, this isn’t a complaint, just letting you know of some quarks of the device so you don’t have to figure them out on your own. One thing I really like is I can easily boost the battery with some much cheaper LiFePo4 batteries I have laying around. I got 2 12.8V 42Ah batteries for around $80 each on AliExpress with around 1kWh of capacity total. Put in series they will charge the EB3A at about 199 watts, or about 99 watts in parallel. I figured this would work since it is supposed to charge off of a car from the DC input, not just solar, and was rated for enough voltage to put the batteries in series. FYI the batteries I used have an internal BMS for safety to prevent over-discharge and over-current and would recommend the same if you attempt to boost your EB3A with batteries directly. And if using lead acid batteries with no BMS, using a fuse would be a good idea. Also if you buy any 3rd party DC 8mm cables, make sure the plug is long enough to fit in snugly. I had one 3rd party cable where the plug was noticeably shorter than the other and it didn't fit securely into the EB3A. Please check attached pictures to see difference between the Bluetti MC4 cable and a 3rd party cable. I bought the 3rd party cable because it was heavier gauge wire, but that doesn't help if the plug won't stay in. It worked well on solar too getting around 70 watts input on my Dokio 110 watt folding solar panel. TBH I’ve never seen the Dokio put out much more than 70 watts with anything else so I’m not too concerned of any issues with the EB3A. The solar panel was another AliExpress buy. I’ll have to try charging with a better panel in the future. And while many others have done capacity tests I can say this will run a 75 watt incandescent bulb for about 3 hours, or 225Wh of output. Which given efficiency losses in the inverter is not too bad, but not amazing either. Again I didn’t buy this for huge capacity, my extra batteries + solar will keep it topped off. Overall I’m very happy and would recommend this to anybody who needs a small, powerful, versatile solar generator. But just don’t expect it to brew coffee all day (without some backup) just because it can do it a few times on its own. ;)

I've been testing this out for over a year, trying it on a variety of appliances. It works for some, not for others. It won't power up our refrigerators, either one. I didn't expect it to, but had to try it. It will power up our propane hot water heater and baseboard heating system. Which is the main reason I purchased it. It is able to run the heating system for about 4 hours during a power outage. This is useful for overnight, so you don't wake up totally freezing. BUT, I also bought it to power up a 30 quart BougeRV portable fridge. See my other review for that. For this works GREAT in that it has a UPS mode, so it charges while supplying power to the fridge. Not all power stations have this feature. It does get hot while charging, but I think that's partially because I'm charging with a AC plug not through the car in my testing so far. This brings me to my main point for writing this. I found that the fridge ran over 2x longer using the DC output than it did using the AC outlet. Yes twice as long or more. It's because the fridge is low power and the DC to AC converter in the power station is not very efficient when supplying a lower wattage (28 watts). It also burns about 12watts just in standby on AC and only 5watts in DC. So, in conclusion, it's a really nice unit and I defer to others who have reviewed it if you want more details on it's operation. I'm only writing this to warn you that low power appliances on AC are much less efficient; if possible, run them on DC. My BougeRV 30Q fridge ran for 22 hours at 34 degrees in about 70 - 80F room.

I’ve had one EB3a since September 2024, and received a second unit Christmas 2024 as a gift. Used everyday, living in my truck and plugged into solar panels. Time for a solid review. The first unit—brand new and has been plugged into a solar panel on my truck every single day since late September 2024. The battery does the job when it’s fully charged, but what I’ve noticed as the months have passed that the unit will always randomly shut off and die at a complete 0% once the charge hits anywhere below 50%-60%, from powering ONE single device using between 2 to 10 watts, sometimes 0 watts when the device is in “sleep” mode. If nothing is plugged into the unit and the battery is still on, you may see the display go down to maybe 40-some percent(Note: nothing is plugged in). On average, when being used with something plugged in, I’ve literally NEVER seen this unit ever display any number below 50% (Again note: with something plugged in) because it always completely dies..straight to an abrupt 0%. This has happened several times now, and yes it has been properly power cycled numerous times. 2nd unit: December 2024, received a second EB3a as a gift. First used, charged, and also set up with solar in my truck as a secondary power source paired with the other. Has been used every single day up until today in early January 2025, when it presented the same exact problem as my other unit. Powering one LED light only using only 2 watts, the battery display shows 70%, and once again abruptly shuts off randomly! Exact same issue as my other EB3a. After experiencing this issue on my first EB3a, I thought maybe it was because it’s somewhat of an “entry-level” unit in the BLUETTI product line, so I really considered purchasing a bigger more powerful unit within the BLUETTI product line. I’m glad I did not, because at this point after experiencing the same issue on my first EB3a and now my recently new EB3a, I’ve decided to sway away from all BLUETTI products moving forward and I encourage everyone reading this review to avoid using their products as well. I also want to point out that when using the BLUETTI app, there is absolutely ZERO security provided to “mask” your unit when connecting on the app using the Bluetooth feature. Numerous times have I selected the Bluetooth option on the app only to see other BLUETTI units as well as my own showing up on my app! I’m then able to select their unit, see their charge and even turn on and turn off their power ports. Not good. There is also a lot of useless garbage filling the main screen of the app. After daily use and experiencing the same exact issue on both units, I’m going to immediately assume the rest of their products are garbage as well. Waste of money. You can’t rely on consistent power with BLUETTI if this is a regular issue that clearly they’re not addressing.

I bought the EB3a to test out its functionality and to hopefully use it as backup power for my CPAP in our frequent power outages. It has a 600W sustained load rating and a peak output wattage of 1200W. It will only allow you to hit that peak rating for a split second or two before it reads overload and will shut off so you need to be sure to look at the input needs of each device before you plug them in to ensure compatibility. I have had this unit for about a month and have used it off and on almost daily, testing things that would work and may not work. This has yielded some interesting results. But before I get into that I wanted to give you a brief list of my credentials so that you have some idea as to my background. I was an electronics technician in the navy for 20 years before retiring and have hundreds of hours of experience working on small electronics as well as large equipment with very high voltage requirements. I have been involved in testing and certification of new equipment for the US military and have spent time as a shift test engineer. That said there are several video’s out there that discuss the efficiency and the capacity of the EB3A so I wont bore you with those types of details. Honestly what do you need to know?? What can it do… What can I use it for….. Is it worth the asking price… Am I going to get value out of it…. First question what can it do and what can you use it for.. These are VERY open-ended questions because the reality is that anything that fits inside its power output range it can power. Some of the sicario’s that I have put it through were things like. Charging a laptop, charging two iPad Pro’s and 2 iPhone 12 Max’s. Will it overheat or shut down if I charge multiple tablets and how about a hair dryer? Can it power that? Well, the answer is yes maybe…. Depends on the brand and rating of the hair dryer. I was able to get it to run on low and with low heat if I pulsed the heat on and off. This may seem odd but to the right group of people this info could be very useful, take my wife for example… Also I was able to charge and use my electronic tooth brush with Water pick. All functions worked with no difference between using it plugged in to normal house power and plugged in to the EB3A. In fact the only time I really ran in to any issues was when I tried to run my coffee pot on it. Every time the heating element came on the EB3A would shut down with an overload condition, to be honest this was expected as the coffee pot has a 1300w rating which GREATLY exceeds the 600w rating of the unit itself. It also powered an ultrasonic sink both heating and pulsing its ultra-sonic waves with no issue. The last thing I tried was a house box fan. This surprised me the most of all the tests I did. The box fan ran for 6 hours on low. I charged it up and it ran for almost 4hours on high. Now don’t take these numbers as some kind of promise that it will power your fan for that long but hey, I was impressed. This little unit has some guts! It weighs in at 10.2lbs so its not something that you would want to take hiking into the wilderness BUT day camping or car camping I would throw this in the bag with no hesitations. I did run my CPAP off this and was able to get 10.5hours out of it with the heater off and running it off the AC inverter. That really surprised me that I could get even 1 night's sleep on it. Is it worth the asking price… When looking at battery-powered devices the quality of the battery is the whole price tag and its what makes a good device good and a bad one well bad! You wouldn’t think twice about paying top dollar for a big top-of-the-line truck or muscle car but you would be mad if someone tried to sell you a ford pinto for $50K. The same applies to things like a solar generators. If the maker puts cheap 18650 cells in it at a standard market price and they start to fail after only a handful of uses then where is the value, but if they put LiPO or even better LiFePO batteries and ask just above the standard market price you can expect years of reliable use and there for the additional money now makes more sense and brings added value to your purchase. I have charged and discharged this unit nearly daily and sometimes 4 or 5 times in a single day just to put it through its paces and using the box fan as my constant I still get 6 hours on low even after more than 60 cycles of the battery from full charge to full discharge. Why is this important? Well.. Battery cells can often be a place where companies will try to cut corners to reduce the cost of a unit to make it more appealing to the general public. Back in 2019 I was in the market for a CPAP battery but didn’t want to pay the premium price tag that medical-grade equipment has. I ordered multiple Solar generators to power my CPAP and even tried car jump battery pack that had a built-in dc-ac converter. None of these worked for more than in some cases a few hours in others I could get 1-night sleep on them but they would require hours in some cases all day to recharge and after several charge-discharge cycles I started to notice that most of them wouldn’t hold that same level of charge for very long where I might have been able to get a full night to sleep now I was only getting 6-7 hours and while this is not terrible at some point its just not useful. I finally found a unit that would hold a charge and would give me multiple nights of sleep. But that is for another review. I have now slept on the EB3A for 3 separate nights two nights as a stand-alone power source and one night with it in UPS mode. During the two nights that I spent using it as an external power source, I slept for roughly 9.5 hours and woke up to the EB3A still having 15-20% charge. Anyone that knows or has worked with battery-powered units will tell you that the last ~25% is always iffy and should be treated as suspect because most battery-powered units are really only guessing at the percentage remaining that said you should always assume that a battery at 25% or below is in need of charged and should not be relied upon for continued use. But to have even close to 25% left in a battery pack that is converting the DC power into AC and then the unit to convert it back to DC that's darn good. Honestly, the only way to make this better would be for Bluetti to add a 24vDC outlet onto the unit directly and while powering a CPAP isn’t the primary mission of this solar generator I feel for such a small and compact unit this does a wonderful job. And truthfully I expected it to be dead after 9 hours, so this is a pleasant surprise, please note: my Cpap settings are a little higher than most because im a bigger dude I run about 12 to 15 on the pressure settings, a lower setting like 6 could possibly yield you close to 2 nights on your CPAP with the heater disabled. The charge time from 0% to fully charged is not far from the manufacturer's stated times. In Eco mode with silent charging, it averaged 1 hour and 20 ish minutes to a full charge. This can be hastened by turning on the fast-charging mode but beware that this causes a lot of excess heat and will shorten the life of the batteries. I did use Fast-Charging once to see what the difference in charging was. In silent, it charges at roughly 111w in Fast-Charge it ramps up to 456W. While the difference is huge, I would tend to guess that by using this mode you are most likely to only get ½ of the rated cycles out of the battery pack. It is always best to charge a battery at the lowest charge setting to reduce the amount of heat that the cells experience. That said there are times when a more vigorous charge may be warranted. But I’ll leave that discussion to another time. The cost of this unit at the time of recording is roughly $300 that said compared to many other models on the market some that I have reviewed in the past or have sent back and refused to review. This unit has features that many lack such as wireless charging and voltage conditioning on the DC side of the unit. The voltage is very stable both in DC and on the AC side this means that sensitive electronics won’t be negatively affected by the voltage drop of the battery or battery bounce back which happens when a load is applied and then disappears. Most of the solar generators on the market are made with LiPO batteries and not even name-brand cells the LiFePO4 batteries in the bluetti should last over 2000 cycles which when compared to the LiPO life of 200-250 cycles means you are getting a LOT MORE for your money. All that said what are some things that I didn’t like? First off the fan (in silent mode)… The fan is a variable voltage/speed fan and when it first ramps up during charging it makes a highish pitched noise that when you first hear it makes you wonder if it's going to blow up. Don’t worry once it's up to speed the noise goes away and all you can hear is the standard noise that most small fans make. That said its very quiet and can’t be heard from across the room. Second the max load… This is a tough one because really I think 600W is great for a smaller lighter unit it can power a LARGE range of things without much hassle and the trade-off of a 700 or 800w ac inverter would be that you would end up needing a bigger battery to afford the higher ac wattage. 3rd The screen…. I really wish that it would stay on longer. Or give you the option to see the time remaining in the app. It’s a small thing but sometimes when you plug something in you want to see how the unit is handling it and what to expect from the battery as far as how long it will last…. And well you have to keep hitting the button to see the estimated time remaining and battery draw. Lastly The app I LOVE the app it has SOOOooooooo much potential. Please Bluetti adds more functionality to the app. There is much that a web-based app can provide such as a number of discharge/charge cycles, battery health and more accurate/averaged discharge rate and battery time remaining, this is great for loads that change constantly like a CPAP… Final Thoughts: This is one of those things that if you have never had one before you wonder what you did before you had it. In testing, I plugged in as many devices as I possibly could and as long as I kept it below the max 600w it handled it all beautifully. I am impressed with the fit and finish of this unit none of the buttons feel like they are cheap the plastic is well made the handle is very secure. Overall I feel like it is well built and well worth the asking price. With today's technology and the need to have a device charger close at hand, this is a great option for daily use as well it will prepare you for power outages and even a great power source to take on the road. This is best for 1-2 people and if you intend to use it for a larger family I would recommend looking into the larger EB50 or 70s models. There definitely seems to be a correlation between price and quality when you compare the Bluetti EB3a to other comparable brands. I will be uploading a video soon with much more information. Please don't hesitate to contact me if you have questions about the unit. UPDATE: 08/30/2022 Have been using the EB3a now daily since we received the unit. Still love having it around. I recently received the Solar Charge Cable for the unit and have tried charging it a couple of times with the 2 100W panels that I have on top of my shed, it is for sure slower than charging it via 120vac wall power that's too be expected but the versatility is AMAZING. I will be using this in our RV when we are able to take it out. I was concerned about using my panels with no charge controller as it was going to be a hassle to wire in the charge controller in its current location. After reaching out to Sarah and Cimy they assured me that a charge controller was not necessary and that the open voltage must be between 12 and 28vdc and it must not exceed 28vdc open voltage. After checking my panels they were well within spec 15.8vdc so I plugged them in and away it went charging like a champ. I have to say that I am even more impressed with this unit than I was initially. Thank You to Sarah who worked with me to get the solar charge cable she was very quick to respond and very professional she is a great asset to the Bluetti organization. Also to Cimy who has assisted me with many random questions that I have had. They are both great assets to this company and a pleasure for someone like me to work with.

I live in California and over the last few years I have had to deal with powercuts from earthquakes, weather, fires, etc. I bought this Bluetti portable power station for added peace of mind during these scheduled and unscheduled powercuts. The following features caught my eye on this unit: * Fast AC charging: I completely drained the power supply to 0% and then charged it to 100% in just over an hour. Fast charging is important to me as it means in an extended power outage this unit could be recharged from a generator or a car quickly. * 100w USB-C port: This unit offers a 100W USB C port (instead of a 60W USB C port that most the others do). This is great for charging Laptops quickly (although you do need to use a 100W USB-C cable to get all this power) * The option to connect Solar Panels to the unit and charge it from the sun (I haven't tested this feature yet, but I just really like having this option) The Bluetti E3BA is a very practical and convenient power bank/supply. It delivers up to 268WH of energy/power to your devices. Assuming an 85% efficiency, this is enough energy to recharge a powerhungry 16" Macbook pro (100WH battery) a couple of times, or the smaller Macbook Airs (50WH battery) around 4 times, and the biggest of phones iPhone max battery (~17WH) ~13 times. I tested recharging a 16" Macbook Pro's empty battery (100WH). It used 45% of the E3BAs total charge, which is what I expected. Bigger units with more battery power are available, however with more batteries comes more weight, and these portable generators can get very heavy. This unit is small and light enough to be carried around and moved without having to worry about hurting your back (old person problems!). Its convenient weight and size also makes it easier for casual use, like easily taking it outside to the park, beach or garden. With a 600W maximum draw on the AC side, this unit is *not* suitable for powering electric kettles, portable induction hobs, hairdryers, or anything else that uses lots of power. Even if it were to power devices like this, they would drain the battery very quickly. This device at this size is more suited towards gadgets and laptops rather than power hungry stuff. It also has a nice clean app for checking the current status of the app and for doing firmware updates. The app does not force you to create or sign in with any accounts, which is nice and refreshing these days! Overall I am very happy with the peace of mind this device provides, and I look forward to my next scheduled or unscheduled power cut knowing that I'll be able to keep my laptops, phones and internet hotspots going all day (and then some) with this device.

My uses cases were initially as a on the go small charging device for car camping and keeping a 12v rv style refrigerator running. Recently between 12/16/25 to 12/19/25 I used it as an inverter/ups to keep the home refrigerator running. Its now making a buzzing noise while charging and it doesn't hold a charge as well as it used to. I've used this nowhere near the advertised charging cycles. pros: -Inexpensive -worked well initially -light weight and portable -bluetooth integration to control from an app remotely and check on system -multiple different outlets appropriate for car camping or on the go cons: -Failed when I needed it the most -Issues with holding a charge. Sometimes it would go from 50% reported power to 0% -Makes a buzzing noise while charging now -The screne will stop working you can't turn on AC/DC. The only way is through the APP -Received several notifications stating that there was inverter overload but power in/out was never over 500watts

Es muy práctico y brinda un excelente servicio como emergencias en el hogar cuando falla el alumbrado público

I like the unit in its simplicity ease to use, my only problem was getting it to charge from solar. I did the update and tried charging from electric ( which is fine) and solar at same time to get it going but soon as I disconnected the electric it stopped charging. Maybe an update will come to fix this. They said to try connecting it to car charger to see it it works but I’m not purchasing one just to see if it helps. I did return it because it would not do what I wanted it to.

中古品と言う事で安く買えました丁度軽くて使いやすいと思いますただカーアダプターがオプションなのでべつに購入しました中古品でも展示品が何かで使用感は無く綺麗でした

車中泊で家庭用扇風機を繋いで使用しました。 21時ごろから扇風機を使用し、朝方ぐらいまで使えました。 商品本体のファンが回る音や、その他の騒音など気にならず快適に過ごせました。 SOSライトが付いていますし、災害時にも利用できるのでとても良い商品だと思います。

Se calienta y se descarga aunque esté apagado, a veces no logra cargarse al 100% y pierde carga sin usarlo. Y aparece un aviso de temperatura y deja de cargar si estoy usándolo en ups. Y ya no carga. Tengo que desconectarlo de la fuente y cuando conecto otra vez no carga inmediatamente, se enciende el ventilador. No estoy contento con eso y no puedo devolverlo ni obtener un reembolso, o por lo menos un reemplazo. No es la maravilla que ofrece la marca y no estoy seguro de que bluetti tenga soporte en Mexico. Por lo menos, quisiera un reemplazo. Porque tengo la aensacion de que este producto es reacondicionado (aunque no puedo asegurarlo).