120W Water Pressure Booster Pump for Home 115V 25L/min Demestic Tap Water Pipeline Automatic Water Booster Pump With Flow Auto Switch 1"Outlet 15m/49ft Solar Hot Cold Shower Pressure Booster Pump

The pump does what it's supposed to but threading is a bit off.

Installed this in my 1500 sq ft home to boost water pressure. When water was on it worked very well. BUT, it surged on off infintely after the first 6 hours. You could hear it thru whole house. Even upset Gizmo my cat. They gave me a refund. Install was simple. Wish it didnt surge on off constantly because it could have been great but ended up a nitemare!

Pump was somewhat loud when mounted on the wall in my garage. I insulated the flex lines on the inlet an outlet to reduce the vibration/noise with some improvement. Then the pump started surging and then would not turn off. Suspected a failed pressure switch after about 3 days of operation. I returned for a refund and went a different route (quieter pump). It did increase the pressure and improved the home water system. When the pressure switch failed, I decided to replace with a "quieter" unit.

Just finished installing the booster pump, and unless you are an experienced plumber, you will probably not be able to connect the inlet and outlet connections of the pump and control valve to your water piping system. According to the manufacturer, the threads are 3/4" male iron pipe (MIP). This is WRONG. The threads are actually hose threads. Had to run to the big box store and get two 3/4" female hose thread (FHT) x 3/4" female iron pipe (FIP) brass adaptor; $10.00 each. After installing the adaptors on the pump and control valve (quite tight I might add) they leaked, and after tightening to the point of breaking, they still leaked. Had to remove the adaptors, and after cleaning, I fluxed the threads and screwed the adaptor to the pump connection and control valve and soldered it. Finely, the connection did not leak. Note: If you try soldering the connections on the control valve, you need to take the valve apart as the internal parts are plastic and will melt. Additionally, according to the manufacturer, the outlet on the pump I ordered was supposed to be 1" and it's not. It's 3/4" male hose thread. Was supposed to be delivered on August 2, 2022 and arrived August 8, 2022. The pump seems to be working okay, and boosts the outlet pressure about 15 PSI over the inlet pressure. The pump is a bit noisy which is not a problem for me because it is in a detached shed with my well pump. But if you locate it somewhere in your house, you will probable hear it.

buen producto y muy pratico para istalar

Only used a few months and one day it just started running constantly without shutting off. Motor was at 200 degrees and smelt like burning electrical. Thank goodness I was home. Waste of money for a dangerous product. Should have a over heat sensor to shut down motor and it would prevent this fire hazard and save the motot.

>>> WARNING <<< Do not buy. First pump leaked and replacement got stuck on and got real hot. Thank goodness I saw it and got it shut off before it started a fire. Major defect is it has no overload. It will run until it catches fire.

After 2 days of use, it starts cavitating and will not pump or prime, even with positive water flowing into it. I would not want this even if free because it fully fails. Do no buy.