YoFeW Charging Stand for Apple Watch Charger Stand Aluminum Dock Station Compatible for iWatch Apple Watch Series 4/3 / 2/1/ AirPods/iPhone X/XS/XS Ma /8 / 8Plus / 7/7 Plus /6S /6S Plus

It has officially been 90 days since I received this stand, and I have to say that I think IT ROCKS! Woot Woot!! Alriiiiggght!!! OK...ok let's bring it down. It's not THAT great but it really is a nice addition to my collection. Getting things setup proved to be a simple minor task, inserting the charging cables through the channels on the bottom were cake (although I did find that it's not 100% foolproof. The cables provided with the stand work perfectly, while the Apple Watch cable was just a tad thick and needed some extra TLC to get seated). The pedestal for the watch has a rubber grommet on the bottom that holds a panel on the back in place. Remove that rubber insert and the back slides right off giving you access to the cable. This makes it very easy to install without needing to unscrew anything. But, should you need to use it for, say, an iPad you can remove the watch pedestal and now you have plenty of room for your iPad. My iPhone has a case on it so it's obviously a little bulkier, good thing this allows for the back rest to adjust. A quick thumb screw on the back and you're in business. The overall appearance of the stand is striking and modern. It's all aluminum and machined to perfection. The beveled edges are a fine look and really make this a elegant organized work of art on your bedside table. I am sad that I can't use it with my iPad and Watch simultaneously, for the meantime I've opted to use it with the watch and I couldn't be happier. There is only one drawback to the design, and that is the amount of cable it takes to wind through the channels can limit your reach of the stand. Depending on where you ultimately plug the cable it you could end up wanting more flexibility. For example, the Apple Watch cable is much shorter than those that come with the stand. I had to Velcro the surge protector the the inner side of my night stand just to keep it from always tugging and unplugging my cable from the adapter. If it were any other standard lightning cable I'd just replace it, but , well you get the idea. Love my stand, would buy another for the wife if she had a need.

Bought this for my girlfriend who had a table full of loose Apple charging cables. This cleaned up the space really nicely and the dock is well designed and built. You'll need to use your own Apple Watch charging cable, but that's pretty much on par for other docks. It comes with two non Apple OEM lightning cables in the box, but they worked fine with my iPhone 7📲. There is no charger, so you'll use the charging blocks that came with your phone/airpods/watch/etc. The dock has a good amount of heft to it but I would say that the removal of a charging AirPod case or iPhone is best done with two hands. The stand for the phone does adjust and fits my iPhone Smart Battery Case perfectly

Ok, I didn’t expect much but wow. Nice iPhone/watch stand. It’s metal and the weight is perfect. It looks awesome and keeps my devices well organized. It’s really an eye catcher. Be prepared you have to take it apart to insert the watch charger and the cables for iPhone and AirPods charger. I think it took 10min but I didn’t rush since I didn’t want to scratch the stand and have all cable clean inserted in the cable channels. The hex tool was included in the package as well as 2 iPhone charger cable. So it’s some work to do but definitely worth it! Absolutely recommended!

On the positive side, this is a nicely built, heavy unit that looks good and functions well, plus it gives you a great place to keep and charge your “I’m full-in on the Apple ecosystem” devices. Well done. On the negative side, the statement that the “45 degree angle” for the watch charging stand allows the watch to go into nightstand mode is a lie, or at least it’s a lie with my 42mm original Apple Watch in stainless steel. Maybe with the newer watches being thicker it makes “just enough” difference to trip the orientation sensor into nightstand mode, but on mine, it needs just a little more angle to function. Also, given the angle and the weight of the stainless steel model, it’s very finicky as far as placement goes to keep the magnetic seal strong enough to maintain the watch on the charger. So, if nightstand mode is important to you (as it is to me), you may find that this selling point just isn’t true. Also, while cable routing is masterful in its design, it’s poor in its execution. The channels underneath the bottom plate to run the cables are very narrow and hard to loop the cables through, and a plug supporting the bottom of one of the charging cords doesn’t sit flush when engaged, so it makes the whole base a little tippy. This would have been a perfect design if there were also a flat, smooth bottom plate covering the cables when in their channels to keep them in place and to be flat when placed on a dresser. All in all, it’s pretty good and I’m keeping it, but it’s not quite what’s advertised.

This is a nice stand. I have just two complaints. First, even though the picture show a cover over the back of the watch stand and the cover is referenced in the instructions mine didn't come with one so the watch charging cable is exposed. Second, I wish the lightning cable for the phone was flush with the base of the stand so the phone was supported by the stand and not on the less stable lighting port. The air pods cable is flush which is very nice and feels secure. The phone feels like it could bend or break off if grabbed carelessly.

This docking station is very well-made and looks great. The only problem I have is that the USB -C to lightning cable required for fast charging the iPhone X is slightly bigger and does not fit in this dock without modification. It was a simple fix but may not be something that everybody would want to do. I simply filed the plastic down that was around the lightning end so that it would fit into the dock. I also had a little bit of trouble with getting the cord into the track underneath, it took a little extra work but it works perfectly now.

This is a beautIful stand. I really wanted to like it. However it seems to have a major design flaw (it is important to remember that I have used half a dozen or more different styles of watch stands). The part of this stand that holds the Apple Watch charging “puck” cannot make contact with the watch. Thus, either it is very finicky to start charging and even when it does, it will not fully charge. Too bad, as it is otherwise very very nice! But, I can’t keep it or give it more than one star if it won’t do the things it’s supposed to do. :-(

solid construction, nice cabling grooves underneath. Might be nice if a little length of mesh tubing came with it (iphone cables being typically white, 3 of them coming out the side of this looks pretty gawdy). Minor issue of course - product works well electronically. Solid construction. Some adjustment available for the phone, and seems deep enough that most phone cases will probably work with it.