REBEL Phone iPhone 13 Case [Flex Series] Exposed Sides for Comfort, Aramid Fiber, Strong MagSafe Compatible, Protective Raised Corners, Slim Fit, Frameless Case for iPhone 13 6.1 Inch (Flex Black)

I’m not usually one to write a review ever but rebel is the goat. The cases are amazing i’ve been using them for over 2 years now and have never seen a crack or dent ever. The case might break every 6 months or so but for $20-30 it’s not bad at all compared to the competitors selling inside phone stores always so overpriced and never good. To have the ease of mind knowing I can drop it 50ft and it still not crack bec of their infamous drop testing. Amazing quality, easy to put on, looks great, and fits slim. I am using the flex series which makes the phone practically look like it doesn’t have a case and still has great feel and look.

Took me a while to receive the actual order but when I did it was worth it. It’s hard to find good quality cases for phones that are outdated, believe me I’ve tried, but this company and the is product really is top quality. My iPhone 13 Pro fits snug, there are subtle but super effective little bumpers on each corner and the case never worries me that it would fail on falling or getting crushed. Super sturdy, fits as it says it will, one of the best options for phone cases for outdated phones, REBEL IS TRUE QUALITY

I have never heard of Rebel before but it has become my favorite case. It is slim, protective, looks great and feels great. Pros: 1. Great protection. The corners are reinforced to give better drop protection without adding bulk. This is done by expanding only the corners so the in hand feel does not feel any bigger from the added protection. 2. Raised corners on front and back. This allows the case to sit leveled when placed on a desk, no matter which side you put it on. This also increases the protection to both the camera lens and the screen. There is a lip around the front of the screen but the corners are raised higher to provide even greater protection. Since it is only in the corners, you don't feel it during normal use of the phone. 3. Grip on the sides of the phone. There are so many great cases that unfortunately have smooth sides, making it a dropping hazard. This case has some grit feel to it and provides a decent grip. 4. Tactile and metal buttons. The volume and power buttons are made of metal and have a very good tactile feeling. One of the best, if not the best. 5. Carbon fiber feels and looks great. It is matte and smooth. The Benks carbon fiber case wasn't fulling smooth and you could feel some of the lines in the carbon fiber. 6. Logo is small and not extremely noticeable. The logo is on the back center at the bottom but it is black on the black/grey carbon fiber. It is not very noticeable, which I appreciate. 7. Great cutouts. The cutout for the lightning port is large enough to accommodate any cable. The cutout for the speakers, mic, and silent toggle have a slight pattern to them that is a nice touch. The cutout on the bottom is also asymmetrical, which matches the phone rather than a lazy symmetrical that looks weird as it has openings to empty space. 8. Feels slim. The shape, thinnest, and placement of the added protections make this case feel much thinner than the protection it provides. Cons: 1. Price. It is on the expensive side but still reasonable compared to other carbon fiber cases. 2. The carbon fiber is a fingerprint magnet, but that is always the case with this material.

Coming from Android prior to purchasing the iPhone 13 Pro Max, I knew that the width of the iPhone would bother me. The Rebel Flex case seemed like the perfect solution with it being essentially naked on the sides. Really loved it at first—the look, the feel, the very strong magnets (2 of my kids have other cases and their magnets aren’t anywhere as strong—my Apple Wallet easily slides off their cases). Did drop it a couple of times early on as I adjusted to the new phone and the width and it has protected the phone very well. Unfortunately the case cracked on the upper left hand side where the camera is housed. It’s very thin but eventually it broke. If you rarely change cases and then you probably don’t have anything to worry about. However, my screen protectors kept on lifting on the sides and I kept on charging them out every 2 months or so and the case finally broke. Only lasted about 9 months. I did contact the seller and they sent me a new case. Absolutely excellent customer service! I believe if you always remove the case starting from the bottom instead of the top, you should be able to avoid this issue.

I have dropped my phone countless times and as long as I have this case, my phone has remained flawless. Dropping onto concrete, tile, or any other hard surface does not damage my phone. That’s hard to say about most other cases out there at this price point. The design is beautiful. One of my biggest gripes with phone cases is the fact that they are always super bulky, adding quite a bit of width, length, and height to an already massive phone. This case mitigates all of that with the open edge design. The bumpers on all four corners provide great cushion for falls on the side. While it may not protect the sides perfectly when dropped onto the edge of a staircase for example, the excellent protection provided elsewhere more than makes up for that as I have yet to drop it in this scenario. There have been many times where I dropped my phone and thought, surely it’s shattered. Nope! Always perfect. Even the back glass, which is notorious for breaking easily, remains fully intact. Also, the massive cameras on the newer iPhones are fully covered with this case. It has a slightly raised edge which ensures your camera never actually touches the ground during a drop or even when setting it down. This is especially useful for protecting the back glass. Because of this, I have been able to avoid using a glass camera protector without issue. Lastly the minimal branding/logos on this case make it absolutely perfect for my taste. 100% recommended.

I got a 13 Pro Max so of course, we all want ultimate protection. I don’t particularly drop my phone much but it’s always that one back of the mind thought that haunts us.. “what if we drop it”.. I purchased this case to replace my Peak DesigN EDC, based on a weeks worth of research, YouTube video, online articles you name it.. First impressions were that it is a very good looking case, the aramid fiber design is quite attractive to the eye, and the overall design is great.. although looks can be deceiving.. getting the case on is a bit of a challenge. I found myself almost wanting to stretch the case out just to get it on the corners and other side. Not that, that is a bad thing but it does show how tight the fit is.. one of the downfalls I found, is the easier edges at 3/4s of the corners on the back to match the camera lip height, and the raised edges on the front corners. It is a raised lip but they added just a tiny bit of an extra edge lip to protect from face down falls. While that is great to know you have solid protection both front and back, quite often it dug into your palms, whether you’re holding it vertically or horizontally. May not bother some people but to me it got annoying and sometimes slightly painful. It did however have a nice lining inside the case to prevent any scratches on the back of the phone. I will say that it does provide grip, but it’s not the kinda grip I would totally prefer, as my preference is the amount of grip the Otterbox Defender Pro Anti- Microbial offers since the plastic cover is all rubber. The cases magnets are pretty strong, but I think it will truly depend on what MagSafe product you’re using and how strong the magnets are on that, that will determine personal opinions. I tried it against the Peak Design wall mount which was my phone mount in my semi, and it did hold onto it very well and didn’t fall out throughout the day, but again Peak Design uses they’re own magnet setup/system that goes against Apples MagSafe which doesn’t always work with all MagSafe products. I will say that the volume down button started making a weird noise when you press it and you could feel like it was not totally sitting on the volume down button on the phone. The buttons while tactile, just didn’t seem to have durability. I know rebel had an issue with case buttons in the past which I read was fixed but I’m not sure it was totally fixed, or maybe I got one of the bad cases. I’m not sure but I had no issues at first and then after a few days that’s what began to happen. Overall, if you want an aesthetically good looking case with protection and don’t mind the minor flaws, go for it! But if you’re like me, you want a good grippy case, with good protection all over, I would say look elsewhere, as I’m finding myself going back to an Otterbox for that piece of mind protection.

The best case I've bought so far; it's very stylish, doesn't take up space, and you don't even notice it's on the phone.

Update: After less than a year of use, my case broke. The rubber at both bottom corners split apart, and the case would no longer actually hold the phone. I tried supergluing, but that didn’t hold for more than a couple hours. This is upsetting as my first Rebel case was perfect the entire time I had it. Also, this recent one never properly lay flat on any flat surface. I had to sand down a couple of the corners to make it lay flat. This case seemed cheaper all around than the one I had on my iPhone X. Shame. I upgraded my iPhone after having my last one for nearly three years. I had a Phone Rebel case on it for more than two of those years. But for some reason when I got my new iPhone I opted to buy some cheap case with no sides. That thing never sat flat since the only raised part was the camera protector. Also the back extended past the sides of the phone, and I always felt like I was dropping it when putting down on a hard surface. It also always felt like it was slipping in my hand if I held it one-handed. The Phone Rebel case solves these problems. The back has raised corners so it lays flat on flat surfaces. But the best part is that not only are the sides open (much more comfortable to me and shows off the phone color) but the back of the case is beveled, which means there’s a bit of room for my fingers underneath the phone when I put it down and pick it up. All their cases without sides are like this, while nobody else has that feature. It makes me feel much better about putting my down, and it doesn’t feel like I’m dropping and breaking it. And of course, holding the phone is just great. The carbon fiber styled back gives a good amount of grip, while the rounded/beveled edge on the bottom doesn’t dig into my pinky finger(s), which is a problem with a lot of cases. The case is a bit heavier than I prefer from a minimalist case, but that’s because of the design, which I appreciate more than just being lightweight. The corners are beefy and provide great drop protection (I know this from experience) and the rigidity of the case means it doesn’t pop off as soon as it hits the ground. This is one of the longest reviews I’ve ever written for a product and it’s for a phone case. So that should at least help explain just how awesome this case is, that I put that much into a review for it. No phone I have will ever again feel proper if I don’t have a Phone Rebel case on it.

So I had the frost series case for my iPhone 11. That was amazing. It never broke or anything. This case on the other hand. The case broke and cracked. It was the worst feeling ever. I love this company and my old case. This was supposed to be my last case and now I don’t know what to do. I reviewed this as 5 stars before cause I trusted it. But now it’s just 1. Any case that breaks especially for the $50 price tag I spent. It’s a bad case. Okay so this is an edit. I contacted rebel customer service to just let them know what happened with my case cause I was shocked. I didn’t expect anything. They gave me a $20 credit for a next purchase. Yes it’s not a refund or anything but I’m still happy with it

Premium materials and feel, very snug fit, fantastic quality and is far nicer to hold than a bulky squared off case. Comes with almost invisible protectors for scratch protection of the side rails. 100% recommend over any other generic Australian 'popular' phone case - this is genuinely going to outlast the phone, and protects + looks better than almost every case out there.

Bought this case for my iPhone13 pro Max was happy with the case at start seem like good quality that it should be for the £60. I paid at the time two weeks after having the case, one of the buttons fell off then formal flare of the case was falling apart wouldn’t even hold the phone waste of money do not buy does not hold up day-to-day use

Me gustó bastante, siento que si vale lo que cuesta, se siente de muy buena calidad y resiste bien las caídas accidentales de poca altura