2 Packs [Upgraded] Qrity Cabinet Cupborad Furniture Door Lift Stay Support Hinge Damper - Support Up to 20KG - Opening Angle 75°/90°/110° - Come with Hex Key

Fast and easy

These door lift supports are great for camper cabinets. I added two additional camper cabinets within a Intech Flyer Forge and these worked great to hold the door open. These were far cheaper than the OEM ones and work just as good. Made of good materials and has the ability to adjust for a perfect fit.

No instructions provided. I did not need them as we do a lot of projects but would have been nice. Used two to support a 10 lb lid on a custom box. It just would not support it. In trying to tighten the cheap Allen wrenches just rounded out. I used my own tool and hot it as tight as I could. It did not even slow down the lid closure. Returning the product

My built in hamper door hinge gave out after 30 years, I looked for a simular replacement several times but I couldn't find one. Finally I was painting the bathroom and decided to go at it more seriously. This item gave me the solution. The door hinges on the bottom. This item gives it a slow open and hard stop feature. I first put a normal hinge on the lower part of the door to the cabinet. This thing stops the door from opening hard and maybe breaking things. The device doesn't come with great instructions but I think anybody could figure it out with a bit of thinking and the pictures they include. One point, the pictures for the new design are wrong, one of the brackets is what I would call strait and one has a 90 bend, which is like the assembly picture shows not the parts spread out pictures. The hinge had to be reversed to work opening down like it does. Most hinges can't be reversed like this. I'm including a picture of my installation which might help somebody.

There are a few important points about how this item can be used, but first let me say that I was able to make these items work, but if they had been high-quality, precision made parts, things might have been a bit easier. I wanted a soft-close on a desk for my kid. I originally bought the Sugatsune knuckle-style lid-stay that I've successfully used before on toy boxes, but found that the knuckle hit the bottom of this shallow ( 3 1/2 inch deep) desk compartment. Because both arms on this item are approximately the same length, I was pretty sure I could configure it to fold evenly, which I was eventually able to do. The configuration provided in the measured drawings in the rather skimpy instructions does requires a depth of compartment of approximately 5 inches. By moving the container-side attachment point about 1 1/2 inches down (away from the opening) and 3/4 inches toward the lid hinge, I was able to get it to fold more evenly, so clearance into the depth of the compartment was not an issue. According to the included lid-weight chart, my lid is well within the adjustment range of a single stay, but I found that once I installed one on the right-hand side, the lid slowly closed to about 40 degrees and then dropped without much resistance, even with the friction adjustment at full. So I mirrored the installation on the left-hand side and the lid was pretty hard to close, but no longer dropped hard. So then I removed the right-hand side, and lo and behold, the lid still closed slowly. The loss of resistance was just a bit of a defect in the one stay. It would have worked if I just wanted something to keep the lid open and not control its descent. This all jives with my impression of this hardware from when I first handled it. It's heavy duty and strong enough, but it doesn't feel precision made. It rattles a lot. I will probably not buy this lid-stay again, instead paying about double for the knuckle-type, just because those seems to be made to high tolerances and are nicer to work with. That said, this set of lid stays did work for me and I'm not worried they are going to break under the strain of kids playing with them.

We have one of those fancy overhead cabinets that flip up. I installed these to keep the doorsfrom slamming shut on my fingers. Or my head, since it's about that high. The Experience: Installation was straightforward (the instructions were actually in English, which was a nice surprise). They look sleek and hold the door up perfectly. Why 4 Stars? I bought the two pack, and one of them stopped working smoothly after a few days. It developed a bit of a "hitch" in its giddy-up and doesn't work as well as the other. The rest are fine, but that one is the black sheep of the family.

Exactly what I needed in my camper for an upper cabinet.

The adjustable hinge is what's important. The old hinges just didn't hold these overhead doors up anymore. I also had one door that wouldn't stay closed tight but this fixed that as well. All the hardware is included. Happy wife. Priceless.

j'ai remplacé les ancienne par celles çi et c'est parfait elle se monte facilement et de qualité merci

not the perfect material as I was expecting.... but it is ok in reference to its price.

They work great..didn't think they would as they appear flimsier than the Ikea hinges..Ikea has changed their hinge design and no longer support the hinge..these are a good replacement..so far so good.

Used to mend broken tent pole. Excellent job done.

Come da titolo dopo pochi mesi ho dovuto sostituirli in quanto non reggevano più lo sportello